MACOM 5-5227079-3

RF Coax Connectors
BNC Connectors (50 ohm/75 ohm)
Product Facts
■
Bayonet lock coupling for
quick connect/disconnect
■
Various connectors available
in 50 and 75 ohm versions
■
Fully intermateable with
comparable BNC UG/U
connectors
■
Full range of Hex Crimp
and O Crimp Products for
common coaxial cables.
■
Low VSWR
■
Single crimp connectors
offer one crimping operation
for fast application
■
Twist-on connectors require
no special tooling for
application to the cable
■
Field serviceable (Category
A) connectors qualified to
MIL-C-39012
■
Field replaceable (Category
C) plugs with captivated
center contact
■
Field replaceable plugs can
be terminated with industry
standard tooling
■
Tarnish resistant Nickel
finish available
■
Choice of different dielectrics
■
Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
R
■
PC Board soldered
connectors are recognized
under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
The Tyco Electronics BNC
RF connector family with
bayonet locking coupling
provides highly reliable,
quick connect/disconnect
coaxial connections.
Exclusive single and
O crimp terminations allow
positive insulation grip
and require no soldering,
providing terminations at
a very low overall applied
cost.
Available in both 50 and 75
ohm versions, these con-
nectors feature numerous
styles including cable plugs
and jacks, adapters and
printed circuit board connectors. In addition to a
variety of crimp type terminations, connectors are furnished in field replaceable
and twist-on styles. These
connectors accept a wide
range of coaxial cables and
are intermateable with
industry standard connectors designed to MIL-C39012 specifications.
Tyco Electronics can also
supply low cost alternatives
with an extensive commercial type product line. A
lower cost consumer series
product offers the capability
to supply center contacts in
strip form and allow for automated center contact crimp
technology. All connectors
are designed around the
mil-specifications, but utilize
low-cost materials, offering
comparable mechanical
and electrical performance.
108-12002 — BNC Commercial
T Adapter
108-12095 — BNC Commercial 75
Ohm Connectors
108-12096 — BNC Commercial FeedThru and Bulkhead
Adapters
108-12079 — BNC Commercial 50
Ohm Solder Jacks
108-12103 — BNC Commercial PCB
Press Fit Jacks
Application Specifications —
114-12001 — BNC Commercial PCB
Jack Press Fit
Performance Specifications —
Page 45
Material Specifications — Page 46
Tooling — Pages 266-268
Military Category — All MIL type
O crimp connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All MIL Type connectors
are packaged individually, all O crimp
connectors are bulk packaged and all Hex
crimp connectors are individually packaged unless otherwise noted.
R
■
Certified by Canadian
Standards
Association
File No. LR 7189
R
Between Series Adapters
For BNC Between Series Adapters, see
pages 251-260.
Related Product Data
Product Specifications —
108-1275 — BNC Ohm Terminators
108-12020 — BNC O Crimp
Connectors
108-12044 — BNC Commercial Hex
Crimp
108-12047 — BNC Commercial and
Hex Crimp Connectors
108-12074 — BNC Solder Jacks
108-12075 — BNC Connectors
(Category A)
108-12078 — BNC Commercial PCB
Panel-Mount Jacks
44
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications
Characteristics
Electrical
Impedance, Nom.
(Ohms)
Working Voltage
(Volts RMS)
Contact Resistance
(Milliohms)
Initial Insulation Resistance
(Megohms)
Dielectric Withstanding
Voltage (VAC)
Corona Level at 70,000 ft.
(Volts, RMS)
RF Leakage, Max.
(dB)
RF Insertion Loss,
Max. (dB)
Frequency Range
(GHz)
VSWR in Frequency
Range Max.
Mechanical
Force to Engage (lbs. [N])/couple,
(in-lbs. [N-M]) max.
Coupling Nut Retention,
Min. N [lbs.]
Cable Retention,
N [lbs.]
Durability (Cycles)
Jam Nut Mounting Torque,
Max. [N•m] (in. lbs.)
Environmental
Temperature Range,
Operating (C°)
Vibration
Physical Shock
Single
Crimp
(MIL Type)
Category B
O Crimp
(MIL Type)
Straight
Solder
Clamp
Right-Angle
Solder
Clamp
Commercial
O Crimp
& Hex Crimp
50 Ohms
Commercial
O Crimp
& Hex Crimp
75 Ohms
Commercial PC
Board
50 & 75 Ohms
Commercial
Solder
50 Ohm Jacks
50
50
50
50
50
75
50 & 75
50 & 75
500
500
500
500
500
500
500
500
Inner: 1.5
Outer: 0.3
Inner: 1.5
Outer: 0.2
Inner: 1.5
Outer: .20
Inner: 1.5
Outer: .20
Inner: 2.0
Outer: 1.0
Inner: 2.0
Outer: 2.0
Inner: 6/1.5
Outer: 3/0.2
Inner: 2.75
Outer: 1.0
5000
5000
5000
5000
5000
5000
5000
5000
1500
1500
1500
1500
1500
1500
1500
1500
375
375
375
375
375
375
—
375
—
-55 at
2-3 GHz
0.2 at
3 GHz
-55 at
2-3 GHz
0.3 at
3 GHz
-55 at
2-3 GHz
0.2 at
3 GHz
-55 at
1-2 GHz
0.15 at
2 GHz
—
—
—
-55 at
2-3 GHz
0.2 at
3 GHz
—
—
0-2.5
0-4
0-4
0-4
0-4
0-2
0-4 and
0-2
0-4
1.35
1.30
1.30
1.35
1.30
1.30
—
—
13.3/11.12
[3/2.5]
444.8
[100]
266.9 [60]
(RG58C/U)
500
25
[2.8]
13.3/11.12
[3/2.5]
444.8
[100]
266.9 [60]
(RG58C/U)
500
25
[2.8]
13.3/.028
[3/2.5]
444.8
[100]
177.9 [40]
(RG58C/U)
500
25
[2.8]
13.3/.028
[3/2.5]
444.8
[100]
177.9 [40]
(RG58C/U)
500
26.7/26.69
[6/6.0]
266.9
[60]
266.9 [60]
(RG58C/U)
500
25
[2.8]
26.7/26.69
[6/6.0]
266.9
[60]
266.9 [60]
(RG58C/U)
500
25
[2.8]
—
—
—
—
266.9 [60]
(PCB Ret)
500
253/124
[2.8/1.4]
500
25
[2.8]
-55 to +85
-65 to +165
MIL-STD-202
Method 201A
-65 to +1651
-55 to +852
MIL-STD-202 MIL-STD-202
Method 204
Method 204
Cond. B
Cond. B
MIL-STD-202 MIL-STD-202
Method 213
Method 213
Cond. G, 50 G’s Cond. G, 50 G’s
-65 to +85
—
-65 to +165
-65 to +165
-55 to +85
-55 to +85
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 213
Cond. G
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 213
Cond. G
MIL-STD-1344
Method 2005
Cond. III
MIL-STD-1344
Method 2004
Cond. G, 100 G’s
MIL-STD-1344
Method 1003
Cond. A
MIL-STD-1344
Method 1002
Type II
MIL-STD-1344
Method 1001
Cond. B
108-12044
108-12047
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 213
Cond. I, 100 G’s
MIL-STD-202
Method 213
Cond. I or A, 50 G’s
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 213
Cond. I, 100 G’s
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
108-12095
108-12078
108-12079
Thermal Shock
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
Moisture
Resistance
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
Salt Spray
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
108-12002
108-12020
—
—
Product
Specification
—
1Assembled
to cable with polytetrafluorethylene dielectric.
to cable with polyethylene dielectric.
3For Metal Threads
4For Polyester Threads
2Assembled
45
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued)
Connector
Component
Single
Crimp
(MIL Type)
Category
B&C
O Crimp
(MIL Type)
Straight
Solder
Clamp
Right-Angle
Solder
Clamp
Commercial
O Crimp
Hex Crimp &
Terminators
Commercial
PCB
Solder
Commercial
PCB
Press Fit
Commercial
Solder
Ohm Jacks
Brass
QQ-B-626
Brass
QQ-B-626
Beryl. Copper
QQ-C-530
Brass
QQ-B-626
Brass
Brass
Brass QQ-B-626
Zinc QQ-Z-363
—
—
—
Phos. Bronze
QQ-B-750
Brass
Brass
Brass
MIL-C-21768
—
—
—
Zinc
QQ-Z-363
Zinc
Zinc
QQ-Z-363
Adapters
Connector Material
Collar
Outer Contact
(Plug)
Shell
(Jack)
Brass
QQ-B-626
Brass
QQ-B-626
Brass
—
Zinc
QQ-Z-363
Dielectric
TEFLON
MIL-P-19468
Polypropylene
Gen. Purpose
TEFLON
MIL-P-19468
TEFLON
TEFLON
Polyethylene
Polypropylene
Polymethylpentene
Gen. Purpose
Center Contact
(Plug)
Brass
QQ-B-626
Brass
QQ-B-626
Brass
Brass
Brass
QQ-B-626
—
—
—
Center Contact
(Jack)
Beryl. Copper
ASTM-B-643
QQ-C-530
Beryl. Copper
ASTM-B-643
QQ-C-530
Beryl. Copper
Beryl. Copper
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-750
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-570
Beryl. Copper
QQ-C-530
Silicon Rubber
QQ-R-765
Copper
Ferrule
QQ-C-576
Connector Primary Finishes2
Silicon Rubber
QQ-R-765
Copper
QQ-C-576
Silicon Rubber
Silicon Rubber
—
—
—
—
—
Silicon Rubber
QQ-R-765
Copper
QQ-C-576
TEFLON
MIL-P-19468
Polypropylene,
Gen. Purpose
Brass
QQ-B-626
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-570
Beryl. Copper
QQ-C-530
Silicon Rubber
QQ-R-765
—
—
—
—
Silver/
Bright Nickel
Silver/
Bright Nickel
Bright Nickel
QQ-N-290
—
—
—
—
Tin Lead
ASTM-B-545
—
—
—
Gasket
Collar
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Outer Contacts
(Plug & Jack)
QQ-S-365
Gold
Center Contacts
(Plug & Jack)
MIL-G-45204
Silver
Gold
MIL-G-45204
Gold
Ferrule3
QQ-S-365
Silver
QQ-S-365
Tin Lead
ASTM-B-545
—
Silver/
Bright Nickel
Polymethylpentene
TEFLON
MIL-P-19468
Gen. Purpose1
QQ-Z-363
Brass
QQ-B-626
TEFLON
MIL-P-19468
Polyester PBT
MIL-P-24519
Brass
QQ-B-626
Brass
QQ-B-626
Beryl. Copper
QQ-C-530
Brass
QQ-B-626
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Silver
Bright
or
Silver/
Bright Nickel
Bright Nickel
Bright Nickel
QQ-S-365
Matte
Nickel
Bright Nickel
QQ-N-290
QQ-N-290
QQ-N-290
Bright Nickel
QQ-N-290
QQ-N-290
Tin Lead
Tin Lead
Tin Lead
Silver
ASTM-B-545
ASTM-B-545
Gold
ASTM-B-545
QQ-S-365
Gold
Silver, QQ-S-365
Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365
Gold
Gold, MIL-G-45204 Gold, MIL-G-45204
Gold, MIL-G-45204 MIL-G-45204
—
1Several
pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification.
3Ferrules with tin-lead finish are used with nickel plated outer contacts.
2If
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
46
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm
Plugs, Crimp
Single Crimp
Hex and O Crimp
L
Max.
14.53
[.572]
Dia. Max.
14.53
[.572]
Dia. Max.
L
Max.
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
—
69471-
RG/U
Cable
Termination
Type
Body
Plating
Dielectric
Style
Dim.
L
178, 178A,
178B,
196, 196A
Single Crimp
Silver
TEFLON
MIL Type
33.33
1.312
69245-4
Hex Crimp
Nickel
Polyethylene
Commercial
—
58436-3
—
2-5221128-1
O Crimp
Nickel
Polyethylene
Commercial
220009-5
318450-2
220217-3
1-5227079-6
O Crimp
Nickel
TEFLON
MIL Type
—
1424050-1
220026-1
5225395-7
Single Crimp
Silver
TEFLON
MIL Type
69245-2
—
69422-
2-5330061-1
Hex Crimp
Nickel
Polyethylene
Commercial
—
2-5221128-3
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
174,
188, 188A,
316
179, 179A,
179B, 161,
187, 187A,
BELDEN
9221
RD 316, 188,
Double Braid
BELDEN
8219
BELDEN 9907,
89907 COMM/
SCOPE 2104
BELDEN
8218
Part No.
5330876-0
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
33.53
1.320
27.69
1.090
30.18
1.188
33.33
1.312
33.53
1.320
27.69
1.090
-30.18
1.188
33.33
1.312
27.69
1.090
33.53
1.320
27.69
1.090
O Crimp
Nickel
Polyethylene
Commercial
27.69
1.090
220187-1
318452-2
220217-1
6-5227079-84
O Crimp
Nickel
Polyethylene
Commercial
69477-4
58539-1
58376-1
1-5227079-9
O Crimp
Nickel
TEFLON
MIL Type
27.69
1.090
30.18
1.188
—
91904-1
69669-2
1-5225395-0
Single Crimp
Silver
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
—
58436-3
—
1424050-1
220217-3
2-5227079-2
—
—
220026-1
5225395-8
—
91910-1
69408-
2-5329446-1
69477-4
58539-1
—
8-5227079-2
—
58436-12
—
2-5221128-7
220187-1
58435-11
220217-1
6-5227079-73
1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only.
4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only.
2Order
3For
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
47
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
Single Crimp
Hex and O Crimp
L
Max.
14.53
[.572]
Dia. Max.
RG/U
Cable
58, 58A,
58B, 58C
BELDEN
88240,
BERK-TEK
BTDC-58,
COMM/
SCOPE 2135
223,
55, 55A,
55B
142, 142A,
142B, 400
Termination
Type
Body
Plating
Dielectric
Style
Dim.
L
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
33.53
1.320
27.69
1.090
33.74
1.328
33.33
1.312
33.53
1.320
33.33
1.312
33.33
1.312
27.69
1.280
43.64
1.718
33.33
1.312
27.69
1.090
30.18
1.188
33.33
1.312
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
14.53
[.572]
Dia. Max.
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
L
Max.
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
—
58436-12
—
5221128-13
220187-1
58435-11
220217-1
5227079-5
269478-1
220189-3
69727-
5225395-1
2—
91904-4
69223-1
2-5329444-1
—
58436-12
—
1-5221128-0
220217-1
4-5227079-3
69727-
4-5225395-2
220187-1
58435-11
269478-1
220189-3
220187-1
58435-11
269478-1
—
220217-1
5227079-6
220189-3
69727-
5225395-3
91904-3
69424-
2-5329444-2
220217-1
6-5227079-1
220187-1
58435-11
269478-1
220189-3
69727-
269331-1
—
69429-1
5225395-6
2-5330358-2
Consult Tyco Electronics for recommended crimp tooling.
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3Bulk packaged.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
48
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
Single Crimp
Hex and O Crimp
L
Max.
14.53
[.572]
Dia. Max.
RG/U
Cable
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
Termination
Type
Body
Plating
Dielectric
Style
Dim.
L
Hex Crimp
Nickel
Polyethylene
Commercial
14.53
[.572]
Dia. Max.
L
Max.
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
—
58436-12
—
1-5221128-1
220187-2
58435-11
220217-2
5227079-7
220187-2
58435-11
220217-2
1-5227079-1
—
58537-1
—
5225395-2
69141-1
—
—
2-5329445-1
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
33.53
1.320
27.69
1.090
27.69
1.090
30.18
1.188
33.33
1.312
Nickel
Polyethylene
Commercial
33.53
1.320
—
58436-12
—
1-5221128-1
Nickel
TEFLON
MIL Type
34.14
1.344
69477-1
58537-1
69669-1
4-5225395-1
Nickel
Polyethylene
Commercial
33.33
1.312
—
58537-1
—
5-5227079-3
Nickel
Polyethylene
Commercial
33.53
1.320
—
58436-12
—
1-5221128-7
Nickel
TEFLON
MIL Type
30.94
1.218
—
258537-1
69669-1
2-5225395-0
Silver
Polypropylene
MIL Type
41.50
1.634
69652-
—
220000-1
5330878
Silver
TEFLON
MIL Type
27.31
1.075
47.63
1.875
47.63
1.875
47.63
1.875
52.38
2.062
220015-1
—
—
5225886-1
220015-1
—
—
5225886-4
220015-1
—
—
5225886-7
220015-1
—
—
220015-1
—
—
302, BELDEN
88241, 89269,
Hex Crimp
Hi-Temp 62A,
Times PL62,
BERK-TEK, BTDC-59,
O Crimp
BTDC-62
Hi-Temp 59,
Times PL59,
O Crimp
PLF59 (20 AWG C.C.)
BELDEN
9104, 9240,
Hex Crimp
9112, 9167,
9259, 9266,
Times
O Crimp
FM-59
BELDEN 8281,
9141, 9231,
Single Crimp
Western Electric
724, 728, 3049
8, 8A,
O Crimp
213
11, 11A
O Crimp
Silver
TEFLON
MIL Type
BELDEN 9914,
Times FM-8
Alpha 9847,
BELDEN 8213, 9292
9, 9A, 9B,
214
O Crimp
Silver
TEFLON
MIL Type
O Crimp
Silver
TEFLON
MIL Type
O Crimp
Silver
TEFLON
MIL Type
225886-5
5225886-1
1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1
2Order
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
49
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Twist-On
Related Product Data
Twist-On plugs must be used with cable
that has a solid conductor. These plugs
are not recommended for applications
where the cable frequently moves or
flexes.
38.10
[1.500]
14.53
[.572]
Dia. Max.
RG/U
Cable
59, 59A,
59B
Mating Twist-On Jack — Page 52
Right-Angle Plugs,
Crimp
Contact
Plating
Body
Plating
Dielectric
Style
Part No.
Nickel
Polymethylpentene
Commercial
5414265-3
Gold
Single Crimp
Hex and O Crimp
26.57
[1.046]
26.57
[1.046]
L
Max.
L
Max.
14.53
[.572]
Dia. Max.
RG/U
Cable
174, 188,
188A, 316
179, 179A,
179B, 161,
187, 187A,
BELDEN 9221
180, 180A, 180B,
195, 195A
BELDEN 9907,
89907, 8219,
COMM/SCOPE
2104, 3104
58, 58A,
58B, 58C
55, 55A,
55B, 223
142, 142A,
142B, 400
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
14.53
[.572]
Dia. Max.
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
—
58436-3
—
5413959-3
—
91910-1
69422-
5331178-0
39.45
1.553
—
58436-3
—
5413959-4
Commercial
39.45
1.553
—
58436-3
—
5413959-5
Polymethylpentene
Commercial
39.45
1.553
—
58436-1
—
5413959-6
Nickel
Polymethylpentene
Commercial
—
58436-1
—
5413959-1
Gold
Nickel
TEFLON
MIL Type
69478-1
220189-3
69727-1
5225974-1
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-1
69223-1
5331175-0
O Crimp
Gold
Nickel
TEFLON
MIL Type
69478-1
220189-3
69727-1
5225974-2
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-3
69429-1
5331182-0
Single Crimp
Gold
Silver
TEFLON
MIL Type
39.45
1.553
37.29
1.468
44.45
1.750
37.29
1.468
44.45
1.750
44.45
1.750
69331-1
—
69429-1
5331182-0
O Crimp
Gold
Nickel
TEFLON
MIL Type
37.29
1.468
—
58537-1
69669-1
5225974-5
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
Style
Dim.
L
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
Single Crimp
Gold
Silver
TEFLON
MIL Type
39.45
1.553
44.45
1.750
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
Hex Crimp
Gold
Nickel
Polymethylpentene
Hex Crimp
Gold
Nickel
Hex Crimp
Gold
O Crimp
BELDEN is a trademark of Belden Wire and Cable Company.
COMM/SCOPE is a trademark of Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
50
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks, Crimp
Single Crimp
Hex and O Crimp
11.1
[.437]
Dia. Max.
RG/U
Cable
174, 188,
188A, 316
179, 179A,
179B, 161,
187, 187A,
BELDEN 9221
58, 58A,
58B, 58C
223, 55,
55A, 55B
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
1Order
11.08
[.436]
Dia. Max.
L
Max.
CERTI-CRIMP
Hand Tool
with
Integral Die
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
Style
Dim.
L
Hex Crimp
Gold
Nickel
Commercial
O Crimp
Gold
Nickel
Polymethylpentene
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
33.02
1.300
30.48
1.200
-30.48
1.200
33.33
1.312
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
-33.02
1.300
—
O Crimp
Gold
Nickel
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
30.48
1.200
30.48
1.200
33.33
1.312
O Crimp
Gold
Nickel
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
—
58436-3
—
L
Max.
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
—
5413779-3
1424050-1
220217-3
5228979-7
—
1424050-1
220026-1
5225396-7
—
—
69422-
2-5330062-1
58436-3
—
2-5413779-4
220187-1
58435-11
220217-1
5228979-5
2—
91901-1
69727-
5225396-11
69140-2
91904-3
69424-
30.48
1.200
220187-2
58435-11
220217-2
5228979-6
30.48
1.200
—
58537-1
269669-1
5225396-2
2-5329452-2
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
51
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks, Twist-On
Related Product Data
Twist-on jacks must be used with
cable that has a solid conductor.
These jacks are not recommended
for applications where the cable
frequently moves or flexes.
40.14
Max.
[1.580]
Mating Twist-On Plug — Page 50
RG/U
Cable
59, 59A, 59B
Center
Contact
Gold
Body
Plating
Nickel
Dielectric
Style
Part No.
Acetal
Commercial
222428-1
Panel Jacks, Crimp
11.2
[.441] Dia.
12.7 ±0.1
[.500 ±.004]
17.84
Max.
[.702]
12.7 ±0.1
[.500 ±.004]
28.96
[1.140]
Max.
2.77
Dia.
[.109]
Recommended Panel Cutout
RG/U
Cable
Termination
Type
Center
Contact
Plating
174, 188, 188A, 316
58, 58A, 58B, 58C
124, 140, 210, 62, 62A, 62B,
59, 59A, 59B, BELDEN 9291,
9209, 9269, 89269
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
TEFLON
TEFLON
MIL Type
MIL Type
—
-69478-1
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
1424050-1
91901-1
O Crimp
Gold
Nickel
TEFLON
MIL Type
-69477-1
258537-1
Body
Plating
Dielectric
Style
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
220026-1
69727-
5225397-7
5225397-1
269669-1
5225397-2
Part No.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
52
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks,
Crimp
Single Crimp
Hex and O Crimp
Note: Panel Insulating
Bushings — Page 54
H
H
L
Max.
L
Max.
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
12.82
[.505]
Dia. Min.
Recommended
Panel Cutouts
-.000
11.04
[.435]
Min.
Maximum Panel
Thickness 3.18 [.125]
+0.08
5.54 -0.00
[.218 +.003 ]
-.000
H = 11/16" across flats, 20.32 [.800] Max. across points
RG/U
Cable
174, 188,
188A, 316
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
Style
Dim.
L
Hex Crimp
Gold
Nickel
Commercial
O Crimp
Gold
Nickel
Polymethylpentene
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
36.83
1.450
34.93
1.375
35.71
1.406
32.13
1.265
35.71
1.406
32.13
1.265
35.71
1.406
179, 179A,
179B, 161,
187, 187A,
BELDEN 9221
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
Times RD316
O Crimp
Gold
Nickel
TEFLON
MIL Type
CERTI-CRIMP
Hand Tool
with
Integral Die
—
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
58436-3
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
—
5413771-3
—
—
220217-3
5228980-7
—
—
220026-1
5225398-7
—
—
69422-
—
1424050-1
220026-1
—
91910-1
69408-
2-5329458-1
—
91904-1
69669-2
1-5225398-5
2-5330063-1
5225398-8
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
53
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks,
Crimp (Continued)
Single Crimp
Hex and O Crimp
Note: Panel Insulating Bushings —
at the bottom of this page
L
Max.
H
H
L
Max.
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
12.82
[.505]
Dia. Min.
-.000
Recommended
Panel Cutouts
11.04
[.435]
Min.
Maximum Panel
Thickness 3.18 [.125]
+0.08
5.54 -0.00
[.218 +.003 ]
-.000
H = 11/16" across flats, 20.32 [.800] Max. across points
Style
Dim.
L
CERTI-CRIMP
Hand Tool
with
Integral Die
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
Polymethylpentene
Commercial
36.83
1.450
—
58436-1
—
5413771-1
Nickel
Polypropylene
Commercial
220187-1
58435-11
220217-1
5228980-5
Gold
Nickel
TEFLON
MIL Type
—
91901-1
69727-
5225398-1
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-4
69223-1
2-5329456-1
O Crimp
Gold
Nickel
TEFLON
MIL Type
—
91901-1
69727-
5225398-3
O Crimp
Gold
Nickel
TEFLON
MIL Type
34.93
1.375
41.28
1.625
32.13
1.265
35.71
1.406
35.71
1.406
—
91901-1
69727-
5225398-6
O Crimp
Gold
Nickel
Polypropylene
Commercial
34.93
1.375
220187-2
58435-11
220217-2
5228980-6
RG/U
Cable
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
58, 58A,
58B, 58C,
BELDEN 88240,
BERK-TEK
BTDC-58,
COMM/SCOPE 2135
Hex Crimp
Gold
Nickel
O Crimp
Gold
O Crimp
58, 58A,
58B, 58C
223,
55, 55A, 55B
142, 142A,
142B, 400
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
Panel Insulating
Bushings for
Bulkhead Jacks
0.89
[.035]
12.93
[.509]
Dia.
0.81
[.032]
5.46
[.215]
14.73±0.13
[.580±.005]
Dia.
13.95
[.549]
Dia.
Material — Nylon
14.1±0.08
[.555±.003]
Note: Can not be used with single
crimp bulkhead jacks.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
17.45
[.687]
Dia.
14.58
Dia.
[.574]
Recommended Panel Cutout
Part No. 330620 (2 Required)
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
54
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, for JIS Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
14.53
[.572]
Dia. Max.
Bulkhead Solder Jacks,
Front Mount
JIS Cable
Termination
Type
3D-2V
Hex Crimp
L
Max.
Dielectric
Dim.
L
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Part No.
Polyethylene
33.53
1.320
58436-1
3-5221128-1
Without Solder Terminal
With Solder Terminal
Body Plating — Nickel
22.23
[.875]
9.65/9.75
[.380/.384]
Dia.
Accepts 1.5 [.059]
Dia. Max. Wire
3/8" - 32
Thread
Accepts 1.5 [.059]
Dia. Max. Wire
3/8" - 32
Thread
.396/4.04
[.156/.159]
Recommended Panel Cutout
L
Max.
W
Dia. Max.
Contact
Material
Dielectric
Silver
VALOX
VALOX
Gold
TEFLON
Tin
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
VALOX
Dimensions
L
W
26.93
1.060
33.33
1.312
26.93
1.060
33.33
1.312
26.93
1.060
33.33
1.312
26.93
1.060
L
Max.
W
Dia. Max.
13.09
.515
13.09
.515
13.09
.515
13.09
.515
13.09
.515
13.09
.515
13.09
.515
Panel
Thickness
Insulating
Bushing
1.17-3.18
.046-.125
1.17-6.35
.046-.250
1.17-3.18
.046-.125
1.17-6.35
.046-.250
1.17-3.18
.046-.125
1.17-6.35
.046-.250
1.17-3.18
.046-.125
227223-1 or
221951-1
227223-1 or
221951-1
227223-1 or
221951-1
227223-1 or
221951-1
227223-1 or
221951-1
227223-1 or
221951-1
227223-1 or
221951-1
Part No.
Without Solder With Solder
Terminal*
Terminal**
5227754-3
5227755-3
—
5227169-7
5227754-2
5227755-2
5227169-4
5227169-8
5227715-3
5227716-3
—
5227169-5
5227754-1
5227755-1
**Includes lockwasher and jam nut.
**Includes solder terminal and jam nut.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
55
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Insulating Bushings
1.09
Max.
[.043]
11.43
[.450]
4.04
Max.
[.159]
0.94
[.030]
Max.
1.78
[.070]
10.93
Dia.
[.430]
14.86
Dia.
[.585]
3.94
Dia.
[.155]
12.7
[.500]
Dia.
0.81
[.032]
11.94
[.470]
9.53
Dia.
[.375]
15.88
Dia.
[.625]
9.53
[.375]
Part No. 227223-1
Part No. 221951-1
11.56 ±0.08
[.455 ±.003]
Dia.
12.83 ±0.08
[.505 ±.003]
Dia.
10.97 ±0.06
[.432 ±.003]
12.07±0.08
[.475 ±.003]
Recommended
Panel Cutout
Recommended
Panel Cutout
3/8" - 24
Thread
Isolated Bulkhead Solder Jacks,
Front Mount
Accepts
1.5 [.059]
DIa. Max.
Wire
Plating
Body — Nickel
Dielectric — White VALOX
Center
Contact
Plating
Tin
Silver
Gold
Flange &
Thread
Material
VALOX
VALOX
VALOX
Part
No.
5227726-1
5227726-2
5227726-3
+0.13
9.91 -0.20
Dia.
[.390 +.005 ]
-.000
3.89
[.153
31.75
Max.
[1.250]
13.09 Dia.
[.515] Max.
+0.08
-0.00
+.003 ]
-.000
Panel Thickness 1.17-6.35 [.046-.250]
Recommended
Panel Cutout
3/8" - 24 Thread
+0.08
Plating
Body — Nickel
Center Contact — Silver
Dielectric — Black VALOX
Flange & Thread Material —
Black VALOX
9.60 -0.00
Dia.
[.378 +.003 ]
-.000
12.83
[.505]
Max.
3.94
[.155
26.80
[1.055]
Max.
Panel Thickness 1.17-3.18 [.046-.125]
Recommended
Panel Cutout
Part No. 5414194-1
Sealed Bulkhead Solder Jack,
Rear Mount
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
This connector is designed to prevent
moisture from entering the interface
from the rear of the connector.
VALOX is a trademark of General Electric
Company.
+0.08
-0.00
+.003 ]
-.000
Rubber
Gasket
+0.13
17.78 Dia.
[.700] Max.
1/2" - 28
Thread
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
Accepts .
1.5 [.059]
DIa. Max.
Wire
+0.08
5.54 -0.00
[.218 +.003 ]
31.75
[1.250] Max.
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
Part No. 5227426-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
56
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Right-Angle Jacks
PC Board/Panel Mount
VALOX Body
Metal Body
1/2-28 Thread
1/2-28 Thread
C
Mtg. Hgt.
Body — Nickel
Dielectric — Polymethylpentene
C
L
A
C
Mtg. Hgt.
C
L
B
A
B
34.93
[1.375]
34.93
[1.375]
Mounting Post Style
Body
Material
Center
Contact
Plating
Dimensions
Tin
L
VALOX,
White
Gold1
Gold1
Tin
Compliant Post
VALOX,
Black
Gold1
Gold1
Gold1
E
L
Tin
Gold1
Metal
Gold1
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
Gold2
-.000
High Temp.
Housing
+0.08
5.54 -0.00
Dia.
[.218 +.003 ]
Gold1
A
B
C
8.59
.338
8.59
.338
6.91
.272
8.59
.338
8.59
.338
6.91
.272
6.17
.243
8.26
.325
8.26
.325
6.91
.272
6.91
.272
6.91
.272
21.21
.835
21.21
.835
21.21
.835
21.21
.835
21.21
.835
21.21
.835
21.21
.835
20.83
.820
20.83
.820
20.83
.820
20.83
.820
21.21
.835
15.88
.625
15.88
.625
13.18
.519
15.88
.625
15.88
.625
13.18
.519
11.68
.460
15.88
.625
15.88
.625
12.70
.500
12.70
.500
13.18
.519
Part No.
Without
With
L
Mounting Posts Mounting Posts
3.48
5226990-1
5227161-1
.137
3.48
5226990-3
5227161-3
.137
3.48
—
5227161-7
.137
3.48
—
5227161-2
.137
3.48
5226990-6
5227161-6
.137
3.48
—
5227161-9
.137
—
With
Compliant Posts
L
—
—
—
—
—
—
—
—
—
—
—
—
5415046-1
—
—
—
—
5227661-1
—
—
5227676-1
5227677-1
—
—
1274668-1
5413879-1
—
—
—
5413879-2
3.48
.137
3.48
.137
3.48
.137
3.48
.137
—
—
—
—
—
5415218-5
2.79
.110
Plating:
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Lockwasher and Jam Nut
Without Mounting Posts
10.16 ±0.08
[.400 ±.003]
With Mounting Posts
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
G
Part No.
1-329632-2
Part No.
1-329631-2
2.54 ±0.05
[.100 ±.002]
S
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05 Mating
[.200 ±.002] Face
Mating
Face
G
0.89 ±0.08
[.035 ±.003]
2.54 ±0.05
[.100 ±.002]
(Top View)
2.01 ±0.05
[.079 ±.002]
(2 Holes)
S
0.89 ±0.08
[.035 ±.003]
(Top View)
Recommended PC Board Layouts
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
57
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
Plating
Body — Nickel
Dielectric — Polymethylpentene
VALOX Body
Metal Body
L
L
1/2-28 Thread
15.88
[.625]
B
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
Body
Material
+0.08
5.54 -0.00
Dia.
[.218 +.003 ]
-.000
Maximum Panel Thickness 6.1 [.240]
VALOX,
White
Recommended Panel Cutout
VALOX,
Black
15.88
[.625]
B
34.93
[1.375]
Mtg. Hgt.
Center
Contact
Plating
Dim.
B
Dim.
L
Tin
21.21
.835
21.21
.835
21.21
.835
21.21
.835
20.83
.820
20.83
.820
3.48
.137
3.48
.137
3.48
.137
3.48
.137
3.48
.137
3.48
.137
Gold
Tin
Gold
Tin
Lockwasher and Jam Nut
1/2-28 Thread
Metal
Gold
34.93
[1.375]
Mtg. Hgt.
Part No.
Without
With
Mounting Mounting
Posts
Posts
5226993-1
5227222-1
5226993-3
5227222-3
5226993-2
5227222-2
5226993-6
5227222-6
—
5227671-1
—
5227673-1
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Part No.
1-329632-2
Part No.
1-329631-2
Without Mounting Posts
5.08
[.200
With Mounting Posts
2.64 [.104] Dia.
Clearance Hole
for 2-56
Self-Tapping
Screw* (2 Holes)
±0.05
±.002]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
10.16 ±0.08
[.400 ±.003]
G
S
10.16 ±0.08
[.400 ±.003]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
10.16 ±0.08
[.400 ±.003]
G
S
10.16 ±0.08
[.400 ±.003]
(Top View)
5.08 ±0.05
[.200 ±.002]
0.89 ±0.08
[.035 ±.003]
(Top View)
Recommended PC Board Layouts
* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2.
Screw for thickness of less than 2.38 [.093] Part No. 221108-4.
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
58
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks with
Mounting Flanges
PC Board/Panel Mount
1/2-28 Thread
15.88 [.625]
Mounting Height
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
C
L
8.59
[.338]
21.21
[.835]
34.93
[1.375]
+0.08
5.54 -0.00
Dia.
[.218 +.003 ]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Body
Material
Center Contact
Plating
Tin
Gold
VALOX,
White
Part No.
5226978-1
5226978-3
Lockwasher and Jam Nut
3.3 [.130] Dia.
Clearance Hole
for 5-40 Screw
22.86 ±0.08
[.900 ±.003]
8.89
[.350]
Part No.
1-329632-2
11.43
[.450]
Part No.
1-329631-2
G
S
Mating
Face
2.54
[.100]
0.89 ±0.08
[.035 ±.003]
(Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
59
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
Body
Plating
Recommended PC Board Layouts
Style A
Center
Contact Plating
Dielectric
Style
Silver
VALOX
A
Gold
VALOX
A
Tin
VALOX
A
Gold
VALOX
A
Silver
VALOX
C
Gold
VALOX
E
Gold
TEFLON
B
Silver
VALOX
C
Gold
VALOX
D
L
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
Nickel
12.7 ±0.08
[.500 ±.003]
17.45 Sq.
[.687]
15.88
[.625]
Drill Holes for
0.94 ±0.05 [.037 ± .002]
Dia. Pin (5 Places)
6.35 ±0.05
[.250 ±.002]
Tin-Lead
1With
Style B
L
Leg
Length L
6.35
.250
6.35
.250
6.35
.250
3.81
.150
4.45
.175
6.35
.250
3.30
.130
3.18
.125
3.43
.135
Part No.
5227699-1
5227699-2
5227699-3
5414460-11
5222420-1
5415189-1
5413969-2
5414305-1
5221123-2
.76 [.030] standoffs on top of legs.
6.88 ±0.08
[.271 ±.003]
1.50 ±0.08
Dia.
[.059 ±.003]
(4 Holes)
3.44 ±0.08
[.135 ±.003]
6.88 ±0.08
[.271 ±.003]
20.57
[.810]
1.02 ±0.08 Dia.
[.040 ±.003]
Style C
3.43 ±0.08
[.135 ±.003]
Style D
6.88 ±0.05
[.271 ±.003]
L
2.44 ±0.08 Dia.
[.096 ±.003]
(4 Holes)
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.003]
4.32
[.170]
1.73 ±0.05 Dia.
[.068 ±.002]
6.48
[.255]
1.32 ±0.08
Dia.
[.052 ±.003]
3.73
[.147]
15.88
[.625]
16.64
[.655]
1.07 ±0.05 Dia.
[.042 ±.002]
L
7.47
[.294]
Style E (Panel Mount)
12.70 0.08
[.500 ±.003]
6.35 ±0.06
[.250 ±.002]
Drill Hole
to Receive
0.940.06
[.037±.002]
Dia. Pin,
5 Required
20.78 0.38
[.818 .015]
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
L
12.70 0.08
[.500 ±.003]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
60
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Metalized Jacks,
PC Board Mount
7.50 ± 0.08
[.295 ± .003]
Signal Contact Hole
1.00 ± 0.08
[.039 ± .003]
2 Plcs.
24.00
[.945]
Switching
Contact
1.70 ± 0.10
Hole
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
10.72 ± 0.25
[.422 ± .010]
3.00 ± 0.10
[.118 ± .004]
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
10.70 ± 0.08
[.421 ± .003]
Recommended
PC Board Layout
Part No. 1274314-1
(Switching)
3.75 ± 0.08
[.148 ± .003]
1.00 ± 0.08
[.039 ± .003]
24.00
[.945]
1.70 ± 0.10
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
3 Plcs.
3.00 ± 0.10
[.118 ± .004]
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
10.72 ± 0.25
[.422 ± .010]
10.70 ± 0.08
[.421 ± .003]
Part No. 1274315-1
Body
Plating
Tin
Tin
Recommended
PC Board Layout
Contact
Plating
Silver
Silver
Dielectric
Polyphenylene
Polyphenylene
Press Fit Vertical Metalized Jack,
PC Board Mount
Part
No.
6274314-1
6274315-1
Insulating Bushing
6.88 ±0.05
[.271 ±.002]
11.94 Dia.
[.470] Max.
+0.08
1.5 -0.10
[.059 +.003
]
-.004
Dia.
4 Holes
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.002]
20.57
[.810]
Max.
1.02 ±0.08 Dia.
[.040 ±.003]
Material — Polypropylene
Part No. 222163-1
Only to be used on Part Nos. 5222006-1
& 5222462-1
14.61
Dia.
[.575]
Recommended PC Board Layout
PC Board Thickness Not Less Than 0.99 [.093]
11.94
[.470] Dia.
2.96
[.115] Max.
6.61
[.260] Max.
Part No. 5222006-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
61
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Right-Angle Metalized Jacks,
PC Board Mount
6.6 ± 0.08
[.260 ± .003]
10.97 [.432]
Mounting Height
3.3 ± 0.08
[.130 ± .003]
C
L
± 0.08
± .003]
2.11
[.083
Dia.
(4 holes)
6.6 ± 0.08
[.260 ± .003]
6.15
[.242]
1.17 ± 0.08 Dia.
[.046 ± .003]
27.64 ± 0.51
[1.088 ± .020]
Body
Plating
Dielectric
Nickel
Polymethylpentene
Tin
TEFLON
Nickel
Polymethylpentene
Center
Contact Length
4.34
.171
4.34
.171
3.33
.131
Part
No.
5413631-1*
5413631-2*
5413631-3*
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout
1.19 ±0.18
Dia.
[.047 ±.007]
3.81 ±0.08
[.150 ±.003]
8.64
[.340]
7.62 ±0.08
[.300 ±.003]
21.85
[.860]
25.40
[ 1.000]
7.62 ±0.08
[.300 ±.003]
Body
Dielectric
Contact
Nickel
TPX
Gold
Part
No.
5414373-1
1.78 ±0.08 Dia.
[.070 ±.003] 2 Holes
Recommended PC Board Layouts
6.6 ± 0.08
[.260 ± .003]
Right-Angle Metalized Jacks,
PC Board/Panel Mount
3.3 ± 0.08
[.130 ± .003]
27.64 ± 0.51
[1.088 ±.020]
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
2.11 ± 0.08 Dia.
[.083 ± .003]
4 holes
6.6 ± 0.08
[.260 ± .003]
10.97 ± 0.18
[.432 ±.007]
1.17 ± 0.08 Dia.
[.046 ± .003]
Body
Plating
Tin
Tin
Dielectric
TEFLON
TPX
Part
No.
5415025-2
5415025-1
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
1/2-28 Thread
4.34
[.171]
+0.08
5.64 -0.00
Dia.
[.222 +.003 ]
Lockwasher and Jam Nut see page 59.
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
62
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Tee Adapters
Style A
Style B
Style C
(Jack-Plug-Jack)
With Insulated
Cover
(Jack-Plug-Jack)
(Jack-Jack-Jack)
D
D
Insulation Material
Polyphenylene oxide
D
F
E
E
E
F
Style
Body
Material
and Plating
Brass,
Nickel
A
B
C
Center Contact
Material
and Plating
BE CU, Gold
(30)2
PH BR, Gold
(15)2
BE CU, Gold
(30)2
PH BR, Gold
(15)2
BE CU, Silver
(200)2
BE CU, Gold
(30)2
BE CU, Silver
(200)2
PH BR, Gold
(50)2
Zinc,
Nickel
Zinc,
Nickel
Brass,
Nickel
Zinc,
Nickel
Dielectric
TEFLON
Acetal
Acetal
Acetal
Acetal
Acetal
TEFLON
Acetal
D
32.54
1.281
33.02
1.300
33.02
1.300
33.02
1.300
33.02
1.300
32.54
1.281
32.54
1.281
32.54
1.281
Dimensions
E
26.19
1.031
27.31
1.075
27.31
1.075
27.31
1.075
27.31
1.075
31.12
1.225
23.37
.920
23.62
.930
Comparable
UG/U
Connector
F
14.27
.562
14.50
.571
14.50
.571
14.50
.571
14.50
.571
17.15
.675
274A
—
—
—
—
1
—
—
—
—
—
Packaging
No.
Per Pkg.
Bulk
(100)
Bulk
(100)
Bulk
(100)
Individual
(1) 3
Individual
(1)
Bulk
(100)
Bulk
(100)
Bulk
(100)
Part No.
221543-2
5413592-2
5413592-6
5413592-9
1-5413592-1
5413366-21
221988-1
5414311-1
Gray insulation cover
(Microinches min thickness)
(Special graphics)
1
2
3
Tee Adapter
Covers
114.55 ± 0.76
[4.510 ± .030]
Material — Polypropylene, general
purpose
Color
Part
No.
Black
221586-1
Ivory
221586-3
15.11
[.595] Dia.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
5.08
Dia.
[.200]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
63
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jack-Jack Adapters
Style B
Style A
Nickel
Nickel
Center
Contact
Plating
Silver
Gold
Nickel
Gold
Body
Plating
35.81
[1.410]
32.54
[1.281]
Bulkhead Jack-Jack
Adapters
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
L
Max.
H
Max.
Body
Plating
Center
Contact
Plating
Nickel
Silver
Nickel
Gold1
Nickel
Gold2
Dielectric
Style
Part No.
TEFLON
TEFLON
Polymethylpentene
A
A
221551-1
221551-3
B
5414414-1
Dimensions
H
L
17.45
.687
17.78
.700
17.78
.700
38.10
1.500
36.07
1.420
36.07
1.420
Dielectric
Part No.
TEFLON
330024-
Polyethylene
Polyethylene
5228226-1
5228226-3
Plating:
Gold1 — 0.00127 [.000050] thick
Gold2 — 0.00076 [.000015] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
+0.06
5.54 -0.00
[.218 +.003 ]
-.000
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
Isolated Bulkhead Jack-Jack
Adapter
Body
Plating
Nickel
Center
Contact
Plating
Gold
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
Dielectric
Part No.
Polymethylpentene
5414105-1
+0.06
5.54 -0.00
Dia.
[.218 +.003 ]
36.07
[1.420]
15.87
[.625]
-.000
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
Plug-Plug Adapter
31.8
Ref.
[1.252]
Right-Angle Adapters
Nickel
Nickel
Nickel
Center
Contact
Plating
Silver
Gold
Gold
Body
Plating
Nickel
Part No.
415796-1
14.53 Dia
[.572] Max.
(Jack-Plug)
Body
Plating
Contact
Plating
Gold
Dielectric
Part No.
TEFLON
TEFLON
Polymethylpentene
5329517-1
5222165-2
5414666-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
22.89
[.901]
Max.
26.97
[1.062]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
64
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Terminator Plugs
50, 75, 93 Ohm
Resistor
Specification
Tether
Plating
1 Watt, 50 Ohm
1 Watt, 75 Ohm
1 Watt, 93 Ohm
0.5 Watt, 75 Ohm
1 Watt, 50 Ohm
Body — Nickel
Center Contact — Gold
Dielectric — Polyethylene
14.53 Dia.
[.572] Max.
33.02
[1.300]
1
Part No.
With Tether
Without Tether
5221629-11
5221629-4
5221629-21
5221629-5
—
5221629-6
—
—
1-5221629-61
—
Tether is conductive with #4 stud size
#6 Stud Size
Insulated
Terminators
Long Cover
Insulation Material
Polyphenylene oxide
38.10 Max.
[1.500]
38.10 Max.
[1.500]
17.40
[.685]
17.40
[.685]
Register
Specification
1 Watt, 50 Ohm
Color
Gray
Black
Cover
Style
Long
Short
Long
Short Cover*
Part
No.
5413557-1
5413364-2
5413557-2
* The Short Cover is required when mating the Terminator with a Tee Adapter.
Jack Covers
Shorting Caps
22.10 Max.
[.870]
14.53 Dia.
[.572] Max.
Body Plating
Silver
Nickel
Plating
Body — Nickel
Center Contact — Gold
Part No.
330022
1-330022-2
15.24
[.600]
101.6
[4.000]
14.53
[.572]
Dia. Max.
#6 Stud Size
Part No. 413453-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
65
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm
Plugs, Crimp
Hex and O Crimp
These connectors have been designed
for optimum performance and have a
true 75 ohm impedance the complete
length of the connector. The crimp die
tooling listed below is different from the
equivalent 50 ohm connectors.
14.53
[.572]
Dia. Max.
L
Max.
Plugs
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
58425-2
—
5413589-8
318451-2
—
5221185-8
58425-2
—
1-5413589-0
58174-1
58248-3
1-5221185-8
58425-2
—
5413589-3
58174-1
58248-3
5221185-3
58425-1
—
5413589-2
58536-1
58248-2
5221185-2
RG/U
Cable
Termination
Type
Center
Contact
Plating
179, 179A,
179B, 187,
187A, 161,
BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
29.46
1.160
35.56
1.140
29.46
1.160
27.69
1.090
29.46
1.160
27.69
1.090
29.46
1.160
27.69
1.090
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46
1.160
58425-1
—
5413589-1
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46
1.160
58425-1
—
5413589-9
O Crimp
Gold
Nickel
Polyethelene
Commercial
27.69
1.090
58536-1
58248-2
5221185-9
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
58425-1
—
5413589-7
58536-1
—
1-5221185-0
58536-1
—
5221185-1
58538-1
58248-1
5221185-7
Body
Plating
Dielectric
Style
Dim.
L
AT&T 735A
BELDEN 8218
140, 210, 62, 62A,
62B, 59, 59A, 59B,
BELDEN 9291,
9209, 9269
302, BELDEN 89269,
88241, Hi-Temp 62A,
Times PL-62, Berk Tek
BTDC-59, BTDC-62
BELDEN 8212, 9104,
9112, 9167, 9240, 9259,
9266, Times FM-59,
(RG 59 Type
with 20 AWG C.C.)
Part No.
O Crimp
Gold
Nickel
Polyethelene
Commercial
BELDEN 9248,
9114
O Crimp
Gold
Nickel
Polyethelene
Commercial
6, 6A
O Crimp
Gold
Nickel
Polyethelene
Commercial
29.46
1.160
27.69
1.090
25.65
1.010
37.85
1.490
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46
1.160
58425-3
—
5413589-5
O Crimp
Gold
Nickel
Polyethelene
Commercial
28.45
1.120
58538-1
58248-1
5221185-5
28.96
1.140
28.96
1.140
58536-1
—
2-5221185-9
58536-1
—
3-5221185-1
BELDEN 9145,
AT&T 734A
BELDEN 8281,
9141, 9231,
Western
Electric 724,
728, 3049
COMM/SCOPE
S59 Hec
COMM/SCOPE
F59 Hec-z
O Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
66
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Plugs for JIS Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
14.53
[.572]
Dia. Max.
L
Max.
JIS Cable
Termination
Type
Dielectric
3C-2V
Hex Crimp
Polymethylpentene
2.5C-2V
Hex Crimp
Polymethylpentene
Dim.
L
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Part No.
58425-1
1-5413589-1
58425-2
1-5413589-6
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Part No.
58425-2
5413590-4*
29.46
1.160
29.46
1.160
Bulkhead Jacks for JIS
Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
20.32
[.800]
Max.
L
Max.
JIS Cable
Termination
Type
Dielectric
Dim.
L
1.5C-2V
Hex Crimp
75Ω
36.83
1.450
*Packaged in 100 pieces per bag.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
67
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Right-Angle Plugs, Crimp
Hex and O Crimp
27.18 Max.
[1.070]
L
Max.
14.53 Dia.
[.572] Max.
RG/U
Cable
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
Style
Dim.
L
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
354940-1 or
PRO-CRIMPER
Adapter 679304-1
179, 179A,
179B, 187,
187A, 161
BELDEN 9221
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45
1.553
58425-2
—
-5413588-8
AT&T 735A
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45
1.553
58425-2
—
1-5413588-0
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45
1.553
58425-2
—
5413588-4
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45
11.553
58425-1
—
5413588-2
O Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.88
1.570
58536-1
58248-2
-5221402-2
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45
1.553
58425-1
—
5413588-9
O Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.88
1.570
58536-1
—
5221402-4
AT&T KS
19224 L2,
RD179
Double Braid
140, 210, 62,
62A, 62B, 59,
59A, 59B,
BELDEN 9291,
9209, 9269
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266,
Times FM-59,
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9145,
AT&T 734A
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
Part No.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
68
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Jacks, Crimp
Hex and O Crimp
11.08 Dia.
[.436] Max.
L
Max.
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
58425-2
—
5413760-8
318451-2
—
5221199-5
58425-2
—
5413760-3
RG/U
Cable
Termination
Type
Center
Contact
Plating
179, 179A,
179B, 161,
187, 187A,
BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
BELDEN 8218
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02
1.300
30.48
1.200
33.02
1.300
O Crimp
Gold
Nickel
Polyethelene
Commercial
30.48
1.200
58536-1
58248-2
5221199-2
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02
1.300
58425-1
—
5413760-1
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02
1.300
58425-1
—
5413760-9
O Crimp
Gold
Nickel
Polyethelene
Commercial
30.48
1.200
58536-1
—
5221199-1
140, 210, 62,
62A, 62B, 59,
59A, 59B,
BELDEN 9291,
9209, 9269
302, BELDEN 88241,
89269, Hi-Temp
62A, Times
PL-62, Berk
Tek BTDC-59,
BTDC-62
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266,
Times FM-59,
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9248,
9114
Body
Plating
Dielectric
Style
Dim.
L
Part No.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
69
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Jacks, Crimp
Hex and O Crimp
+0.13
12.83 -0.20
Dia.
[.505 +.005 ]
-.000
+0.08
5.54 -0.00
[.218 +.003 ]
34.93 Max.
[1.375]
20.32
[.800]
Max.
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Head 318161-1
RG/U
Cable
Termination
Type
Center
Contact
Plating
Body
Plating
Dielectric
Style
Dim.
L
179, 179A,
179B, 161,
187, 187A,
BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
58425-2
—
5413590-8
O Crimp
Gold
Nickel
Polyethelene
Commercial
36.83
1.450
34.93
1.375
318451-2
—
5221221-5
AT&T KS
19224 L2,
RD179
Double Braid
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
36.83
1.450
58425-2
—
5413590-4
BELDEN 8218
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
36.83
1.450
58425-2
—
5413590-3
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93
1.375
58536-1
58248-2
5221221-2
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93
1.375
58536-1
58248-2
5221221-7
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93
1.375
58536-1
—
5221221-1
140, 210, 62,
62A, 62B, 59,
59A, 59B,
BELDEN 9291,
9209, 9269
BELDEN 8212,
9104, 9112, 9240,
9167, 9259, 9266,
Times FM-59
(RG 59 Type with
20 AWG C.C.)
BELDEN 9114,
9248
Part No.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
70
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Solder Jacks
Front Mount
Accepts
.054 Dia.
Max. Wire
27.43
Max.
[1.083]
Plating
27.43
[ 1.083]
Accepts
.054 Dia.
Max. Wire
Max.
Body — Nickel
Center Contact — Silver
3/8-32 Thread
3/8-32 Thread
9.75/9.65
[.384./380]
Dia.
13.09 Dia.
[.515] Max.
13.09 Dia.
[.515] Max.
Part No. 5415187-1
Part No. 5221244-1
(without Solder Terminal)
(with Solder Terminal)
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
4.04/3.96
[.159/.156]
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
Bulkhead Jack
PC Board Mount
3.30
[.130]
Ø 12.70 ± 0.1
[.500 ± .004]
11.07
Max.
[.436]
20.8
[.820]
11.2 ± 0.1
[.441 ± .004]
Part No. 6274086-1
Bulkhead Solder Jack
Rear Mount
Accepts .
.050 Dia.
Max. WIre
Lockwasher and Jam Nut see page 73.
17.78 Dia.
[.700] Max.
1/2-28 Thread
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
+0.08
5.54 -0.00
[.218 +.003 ]
31.75
Max.
[ 1.250]
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Part No. 5414217-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
71
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Right-Angle Jacks
PC Board/Panel Mount
VALOX Body
Metal Body
1/2-28 Threads
1/2-28 Threads
C
Mtg. Hgt.
C
Mtg. Hgt.
Outer Shell — Nickel
Dielectric — Polymethylpentene
Lockwasher and Jam Nut see page 73.
C
L
C
L
A
B
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
Body
Material
-.000
L
+0.13
5.54 -0.00
[.218 +.005 ]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Recommended PC Board Layouts
Without Mounting Posts
10.16 ±0.08
[.400 ±.003]
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
G
2.54 ±0.05
[.100 ±.002]
S
Mating
Face
0.89 ±0.08
[.035 ±.003]
(Top View)
With Mounting Posts
10.16 ±0.08
[.400 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05 Mating
[.200 ±.002] Face
G
2.54
[.100
±0.05
±.002]
S
0.89 ±0.08
[.035 ±.003]
(Top View)
A
B
34.93
[1.375]
VALOX, Black w/
Compliant Posts
(Economy)*
VALOX,
Black
(Economy)*
VALOX,
White
VALOX,
White
(Economy)*
VALOX,
Black
Part No.
Without
With
Mounting Posts Mounting Posts
*
—
5415105-2
Center
Contact
Plating
A
Gold3
6.17
.243
21.21
.835
11.68
.460
2.79
.110
Gold3
6.17
.243
21.21
.835
11.68
.460
4.01
.158
*
—
5415105-1
Gold1
6.91
.272
21.21
.835
13.88
.519
3.48
.137
—
5413194-1
5415634-2
Dimensions
B
C
L
Gold1
6.91
.272
21.21
.835
13.88
.519
3.48
.137
*
—
Gold1
6.91
.272
6.91
.272
8.59
.338
8.59
.338
8.25
.325
8.25
.325
8.25
.325
6.91
.272
8.56
.337
8.25
.325
6.91
.272
6.91
.272
6.91
.272
21.21
.835
21.21
.835
21.21
.835
21.21
.835
20.83
.820
20.83
.820
20.83
.820
20.83
.820
21.21
.835
20.83
.820
20.83
.820
20.83
.820
20.83
.820
13.88
.519
13.88
.519
15.88
.625
15.88
.625
15.88
.625
15.88
.625
15.88
.625
12.70
.500
15.88
.625
15.88
.625
12.70
.500
12.70
.500
12.70
.500
3.48
.137
3.48
.137
3.48
.137
3.48
.137
2.16
.085
—
5413194-2
—
5415634-1
—
5415633-1
—
5414459-1
—
5222092-1
—
5222093-1
—
3.48
.137
3.48
.137
3.48
.137
3.48
.137
3.48
.137
—
5414409-1
—
5415417-1
—
5415419-1
—
5222092-3
—
5414907-1
—
6274072-1
—
3.48
.137
—
6274084-1
Gold1
VALOX,
Black
(Economy)*
Gold1
VALOX,
White
Gold2
Metal
Gold1
Metal
Gold1
Metal
(Economy)*
Gold1
Metal with
Compliant
Posts
(Economy)*
Gold1
Metal
Gold1
Metal
Gold1
Metal
Gold1
Metal
(Economy)*
34.93
[1.375]
Tin
Gold1
**Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω,
screw machined Beryllium Copper).
Plating:
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on
page 54.
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
72
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
VALOX Body
Metal Body
L
Plating
L
1/2-28 Thread
1/2-28 Thread
15.88
[.625]
Outer Shell — Nickel
Dielectric — Polymethylpentene
B
15.88
[.625]
B
34.93
[1.375]
Mtg. Hgt.
34.93
[1.375]
Mtg. Hgt.
+0.13
12.83 -0.00
Dia.
[.505 +.005 ]
-.000
5.54
[.218
+0.13
-0.00
+.005 ]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Contact
Plating
Dim.
B
Dim.
L
Part No.
Gold1
21.21
.835
3.48
.137
5415632-1
Gold1
21.21
.835
3.48
.137
5415632-2
Metal
Gold1
Tin
3.48
.137
3.48
.137
5222132-1
Metal
(Economy)*
20.83
.820
21.21
.835
5415520-1
*Economy connector uses 50 Ω part with smaller dielectric and stamped and
formed contact, Phosphor Bronze contact material (Compare to regular
connector which is 75 Ω, screw machined Beryllium Copper).
Plating:
Gold1 — 0.00076 [.000030] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Lockwasher and Jam Nut
Part No.
1-329632-2
Body
Material
VALOX,
Black
(Economy)*
VALOX,
White
(Economy)*
Part No.
1-329631-2
2.01 ±0.08
[.079 ±.003]
(2 Holes)
5.08 ±0.05
[.200 ±.002]
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
2.54 ±0.05
[.100 ±.002]
10.16 ±0.08
[.400 ±.003]
G
S
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
0.89 ±0.08
[.035 ±.003]
(Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
73
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
Style A
Style B
Style C
L
L
L
Plating
Dielectric — TEFLON
17.45
Sq.
[.687]
20.57
[.810]
16.64
[.655]
15.88
[.625]
6.88 ±0.08
[.271 ±.003]
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
3.44 ±0.08
[.135 ±.003]
1.50 ±0.08
[.059 ±.003] Dia.
(4 Holes)
6.35 ±0.05
[.250 ±.002]
1.02 ±0.08
[.040 ±.003] Dia.
5.16 ± 0.08
[.203 ± .003]
1.02 ± 0.08 Dia.
[.040 ± .003]
14.73
[.580]
5.16 ± 0.08
[.203 ± .003]
2.54
5 Plcs.
[.100]
Press Fit
Vertical Metalized Jacks
PC Board Mount
2.44 ±0.08
Dia.
[.096 ±.003]
(4 Holes)
1.32 ±0.08
Dia.
[.052 ±.003]
3.43 ±0.08
[.135 ±.003]
Recommended PC Board Layout
Style F (Push-On)
2.578 ± 0.076
[.1015 ± .0030]
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
6.88 ±0.08
[.271 ±.003] [.271 ±.003]
12.7 ±0.08
[.500 ±.003]
Drill Holes for
0.94 ±0.05 [.037 ± .002 ]
Dia. Pin (5 Places)
6.88 ±0.05
[.271 ±.003]
2.06 ± 0.05 Dia.
[.081 ± .002] 4 Plcs.
11.49 Dia.
[.470] Max.
Body
Plating
Center
Contact
Plating
Style
Nickel
Gold
B
Tin
Gold
B
Tin
Gold
B
Tin
Gold
C
Nickel
Silver
A
Tin
Gold
F
Leg
Length
L
3.30
.130
3.30
.130
6.35
.250
4.44
.175
6.35
.250
2.54
.100
Part No.
6274291-2
6274291-1
6274359-1
5414394-1
5413986-1
6274360-1
6.88 ±0.1
[.271 +.003]
–.004
3.43
[.135
6.88
[.271
±0.05
±.002]
1.5 ±0.1
Dia.
[.059 +.004]
–.003
(4 Plated-Thru
Holes)
±0.05
±.002]
1.02 ±0.08
Dia.
[.040 ±.003]
(Plated-Thru Hole)
A Max.
Dim.
A
20.57
.810
16.26
.640
Part
No.
5222462-1
5414088-1
Recommended PC Board Layout
Insulating Bushing
Material — Nylon
Part No. 222163-1
Only to be used on Part Nos.
5222462-1 and 5222006-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
14.61
Dia.
[.575]
11.94
[.470]
Dia.
2.96
Max.
[.115]
6.61
Max.
[.260]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
74
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Press Fit
Vertical Metalized Jacks
PC Board Mount
1.7 ±0.05 Dia.
[.067 ±.002]
(2 Places)
For Drive Screw
17.48 Sq.
[.688]
(Continued)
12.7 ±0.05
[.500 ±.002]
PC Board Thickness (Min.)
2.36
.093
3.17
.125
6.35 ±0.05
[.250 ±.002]
±0.08
±.003]
1.02
[.040
(Plated-Thru
Hole 3 Places)
Part No.
5221336-3
5221336-4
12.7 ±0.05
[.500 ±.002]
15.88 Max.
[.625]
6.35 ±0.05
[.250 ±.002]
Recommended PC Board Layout
Press Fit, Bulkhead
Vertical Metalized Jack
6.88
[.271]
4.37 ± 0.51
[.172 ± .020]
5 Plcs.
10.80
[.425]
includes hardware
3.43
[.135]
3.43
[.135]
ø 12.83 + 0.13
– 0.00
[ø .505 + .005]
– .000
28.78
[1.133]
24.41
[.961]
6.88
[.271]
5.54 + 0.08
– 0.00
[.218 + .003]
– .000
Ø 1.02 ± 0.08
[.040 ± .003]
Holes Plated
Through 5 Plcs.
Part No. 6274124-2
Recommended
PC Board Layout
Right-Angle Metalized Jacks
PC Board Mount
10.97
[.432]
Mounting
Height
C
L
6.15
[.242]
28.4
Max.
[1.118]
6.6 ± 0.08
[.260 ± .003]
3.3 ± 0.08
[.130 ± .003]
6.6 ± 0.08
[.260 ± .003]
2.11 ± 0.08
[.083 ± .003]
Dia.
(4 holes)
Body
Plating
Dielectric
Contact
Plating
Nickel
Tin
Nickel
Nickel
TPX
TEFLON
TPX
TPX
Gold2
Gold2
Gold2
Gold1
Center
Contact
Dimension
.171 [.007]
.171 [.007]
.131 [.005]
.171 [.007]
Part No.
5413558-1
5413558-2
5413558-3
5413558-5
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
1.17 ± 0.08 Dia.
[.046 ± .003]
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout
11.43 ± 0.43
[.450 ± .017]
3.81 ± 0.08
[.150 ± .003]
11.07
Max.
[.436]
17.78
[.700]
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
7.62 ± 0.08
[.300 ± .003]
21.84
[.860]
25.40 ± 0.38
[1.000 ± .015]
1.19 ± 0.18
Dia.
[.047 ± .007]
7.62 ± 0.08
[.300 ± .003]
1.78 ± 0.08
Dia.
[.070 ± .003]
Part No. 6274127-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
75
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
27.64 ± 0.51
[1.088 ±.020]
Right-Angle Metalized
Jacks
PC Board/Panel Mount
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
10.97 ± 0.18
[.432 ±.007]
5.64+0.08
-0.00
[.222+.003]
-.000
1/2-28 Thread
4.34
[.171]
Body
Plating
Tin
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Dielectric
Part No.
TEFLON
6274425-2
Bulkhead Jack-Jack
Adapter
Right-Angle Adapter
Plating
Plating
Body — Nickel
Center Contact —Gold
Dielectric — Polymethylpentene
Body — Nickel
Center Contact —Gold
Dielectric —
Polymethylpentene
(Jack-Plug)
12.83+0.13
-0.00
[.505+.005]
-.000
14.53 Dia.
[.572] Max.
Dia.
22.89
[.901]
Max.
5.54+0.08
-0.00
[.218+.003]
-.000
36.07
[1.420]
11/16
26.97
[1.062]
Maximum Panel Thickness 6.35 [.250]
Part No. 5222117-1
Recommended Panel Cutout
Bulkhead Jack-Jack
Adapter
Part No. 5415020-1
Jack-Jack Adapter
Plating
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
36.04
Max.
[1.419]
12.83+0.13
36.07
Max.
[1.420]
-0.00
[.505+.005]
-.000
Dia.
Ø 15.88 ± 0.25
[.625 ± .010]
5.54+0.08
-0.00
Recommended
Panel Cutout
[.218+.003]
-.000
Part No. 415567-1
Part No. 1274935-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
76
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Jack-Push On Plug
Adapter
0.13
Ø 9.65 +– 0.00
+ .005
[.380 – .000 ]
Ø 8.43
Max.
[.332]
8.89 ± 0.13
[.350 ± .005]
Ø 14.35
Max.
[.565]
41.92
[1.650]
Recommended Panel Cutout
Part No. 1274007-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
77
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208