MACOM 206837-1

RoHS
Ready
AMP Circular Connectors
for Commercial Signal &
Power Applications
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
82021-XXX-MS-FP-Rev. 6-07 OG3B
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Introduction
Product Facts
■ Certified by
■ Lightweight, all-plastic and
metal-shell connectors
■ CPC connectors are UL
94V-0 rated and made of
stabilized, heat resistant, selfextinguishing thermoplastic
material
■ Metal-shell CPC connector
housings made of UL 94V-0 rated
thermoplastic
Canadian Standards
Association,
File No. LR 7189
■ Produced under a Quality
Management System certified
to ISO 9001
R
■ A copy of the
certificate is available
upon request.
ISO9001ied
if
ert
MIL-C-5015 Style Circular
Plastic Connectors (CPC)
Miniature CPC
Connectors
Product Facts
Product Facts
■
■
High impact resistant
plastic housing made of
UL 94V-0 rated material
■
Lightweight
■
Lower cost than standard MIL-C5015 connectors
■
Industry accepted Type III+ pin
and socket contacts, available
on reels in strip form for high
volume, low cost, automatic
machine terminations, or in
loose piece form for low
volume, prototype or
maintenance and repair
C
■ Certain products meet
VDE Standard 062
■ Operating temperature range:
-40°C to +105°C
■ Available in panel or chassis
mount and free-hanging
configurations
Six connector series for
different interconnection
requirements:
■ Series 1—Standard density,
signal and low-current
applications using durable
Multimate contacts (.062 [1.57]
pin diameter)
■ Quick connect/disconnect
capability with thread assist,
positive detent coupling
■ Built-in pin and socket
■
protection
■ Polarized for proper mating of
connector halves
■ Special connector configurations
■
offer special solder and posted
contacts, special receptacles
with or without threaded inserts
■ Full complement of optional
■
accessories
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.
for 250 VAC, rms
or 250 VDC, Service‡;
Series 1 and Series 3 (600 V);
Series 4 (600 V) and
Series 2, Series 6 (250 V)
File No. E28476
Series 2—High density
applications using Size
20 DM and 20 DF contacts (.040
[1.02] pin diameter)
Series 3—Low density, power
applications with Type XII
contacts capable of carrying up to
35 amperes of current
■
Improved alignment (U.S.
Standard MIL-C-5015
Connectors) prevents mismating
with other housing insert
arrangements
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Series 4—Combination of
standard and power density
application with Type III+ and
Type XII contacts
R
■
Series 5—Power density
application with Size 8 screw
machined and precision formed
contacts
Certified by
Canadian Standards
Association,
File No. LR 7189
■
Compact, high contact density,
environmentally sealed
connectors
■
Uses existing Mini-Universal
MATE-N-LOK stamped and
formed pin and socket contacts
■
Two shell sizes—available
in 1 to 4 and 5 to 9 position
configurations
Need more information?
Call Technical Support.
They are staffed with specialists
well versed in Tyco Electronics
products. They can provide:
Technical Support
Catalogs
■ Technical Documents
■ Product Samples
■ Authorized Tyco Electronics
Distributor Locations
■
■
©1973, 1975, 1976, 1978, 1981, 1983, 1985,
1989, 1990, 1991, 1992, 1995, 1996, 1999, 2000,
2001, 2002, 2004, 2006 and 2007 by Tyco
Electronics Corporation. All Rights Reserved.
AMP, AMPOMATOR, AMP-O-LECTRIC,
AMP-O-MATIC, AMP-TAPETRONIC,
CERTI-CRIMP, COAXICON, MATE-N-LOK,
POWERBAND, PRO-CRIMPER and TYCO are
trademarks.
R
■
■
Intermateable with Metal-Shell
sizes 20-14 and
18-10, MIL-C-5015 Style
connectors
R
Komax and TopWin are trademarks of
Komax AG.
TETRASEALS is a trademark of
Parker Hannifin Corporation.
AIRflex, FLEXAgraff, FLEXAquick, and ROHRflex
are trademarks of Flexa GmbH & Co.
Series 6—Combination of
standard and power density
application with Type III+ and
Size 8 contacts
Other products, logos, and Company names
mentioned herein may be trademarks of their
respective owners.
‡Select connectors are recognized
for 600 volts service.
Restriction on the use of
Hazardous Substances (RoHS)
At Tyco Electronics, we’re
ready to support your RoHS
requirements. We’ve assessed
more than 1.5 million end
items/components for RoHS
compliance, and issued new
part numbers where any
change was required to
eliminate the restricted
materials.
Part numbers in this catalog are
RoHS Compliant, unless
marked otherwise. These
products comply with European
Union Directive 2002/95/EC as
amended 1 January 2006 that
restricts the use of lead,
mercury, cadmium, hexavalent
chromium, PBB, and PBDE in
certain electrical and electronic
products sold into the EU as of
1 July 2006.
Note - For purposes of this
Catalog, included within the
definition of RoHS Compliant
are products that are clearly
“Out of Scope” of the RoHS
Directive such as hand tools
and other non-electrical
accessories. Information
regarding RoHS compliance is
provided based on reasonable
inquiry of our suppliers and
represents our current actual
knowledge based on the
information provided by our
suppliers. This information is
subject to change. For latest
compliance status, refer to our
website referenced at right.
2
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Getting the Information
You Need
Our comprehensive on-line
RoHS Customer Support Center
provides a forum to answer
your questions and support
your RoHS needs. A RoHS FAQ
(Frequently Asked Questions) is
available with links to more
detailed information. You can
also submit RoHS questions
and receive a response within
24 hours during a normal work
week. The Support Center also
provides:
■
Cross-Reference from Noncompliant to Compliant
Products
■
Ability to browse RoHS
Compliant Products in our
on-line catalog
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
■
Downloadable Technical Data
■
Customer Information
Presentation
■
More detailed information
regarding the definitions used
above
So whatever your questions
when it comes to RoHS, we’ve
got the answers at
www.tycoelectronics.com/leadfree
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Connector Series and Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Internal Protection (IP) Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Current Carrying Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Example of New Current Rating Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
CPC, Series 1
Cable or Panel Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11
Printed Circuit Board Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13
Square Flange Receptacles with Round Posted Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Square Flange Receptacles with Solder Cup Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Feed-Thru Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Square Flange Receptacles, Right-Angle, Posted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,16
Contacts, Type III+ (including Lead Free and Enhanced High Current) . . . . . . . . . . . . . . . . . . . . . . . .17-20
Contacts, Type II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Contacts, Subminiature Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 23
Contact Arrangements, Series 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Component Dimensions, Series 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
CPC, Series 2
Cable or Panel Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Printed Circuit Board Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Square Flange Feed-Thru Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Contacts, Size 20 DF Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Contacts, Size 20 DM Crimp and 20 DF Solder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Contact Arrangements, Series 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Component Dimensions, Series 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
CPC, Series 3
Plugs and Receptacles, Series 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Power Contacts, Type XII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35
Contact Arrangements, Series 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Component Dimensions, Series 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
CPC, Series 4
Plugs and Receptacles, Series 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Contact Arrangements, Series 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
CPC Connector Accessories
Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38, 39
Back-Shell Extender and Panel Mount Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Flexible Cable Boots and Internal Cable Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Sealed CPC Connectors
One-Piece Sealed CPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45
Two-Piece Sealed CPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
.125 POWERBAND Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Connectors, Series 5 and Wire Entry Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Connectors, Series 6 and Wire Entry Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Connectors, Special Series 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Wire Entry Seal Kits and Flange Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
CPC Connector Sealing Accessories
Sealing Caps and Cable Entry Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Jacketed Cable Seals and Rubber Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Flexible Cable Protection System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
MIL-C-5015 Style Circular Plastic Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Connectors, Plugs and Receptacles—Shell Size 20-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Connectors, Plugs and Receptacles—Shell Size 18-10, and Type III+ Contacts . . . . . . . . . . . . . . . . . . .57
Metal-Shell Circular Plastic Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Receptacles and Plugs, Series 1, Standard Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Receptacles and Plugs, Series 1, Reverse Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Contact Arrangements, Series 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Receptacles and Plugs, Series 2, Standard Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Receptacles and Plugs, Series 2, Reverse Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Contact Arrangements, Series 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Receptacles and Plugs, Series 3, Standard Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Receptacles and Plugs, Series 3, Reverse Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Contact Arrangements, Series 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Receptacles and Plugs, Series 4, Standard Sex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Contact Arrangements, Series 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Component Dimensions, Series 1, 2, 3 and 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Metal-Shell CPC Connector Accessories
Cable Clamps, Cable Entry Seals and Protective Cap Assemblies . . . . . . . . . . . . . . . . . . . . . . . .38, 39, 71
Miniature CPC Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Plugs, Receptacles and Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-75
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79
Technical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Part Number Index
Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 82
Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Part Number Cross Reference (Non-Compliant to RoHS Compliant) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
3
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Connector Series and Types
Series 1—Size 16 Contacts
1
3
4
7
6
11
12
14
Series 1 connectors permit
the use of multiple combinations of signal and coaxial
circuits in the same housing
by accepting durable
Multimate contacts. These
pin and socket contacts
include Type III+ and
subminiature coaxial
contacts, interchangeable in
the same Multimate contact
cavity. Type III+ contacts
(.062 [1.57] pin diameter)
are capable of carrying a
maximum of 13 amperes
when crimped in wire.
Type III solder contacts
and posted contacts for pc
board applications are also
available. Many connector
arrangements offer both
standard and reverse sex
contact loading—from 4
thru 37 positions.
Series 2—Size 20 Contacts
3
1
4
8
9
14
20
15
25
21
28
26
Series 2 connectors accept
Size 20 DF (precision
formed) and Size 20 DM
(screw-machined) pin and
socket contacts with a .040
[1.02] pin diameter, Size 20
DF contacts are available in
crimp and solder versions,
as well as a posted version
for wrap-type and pc board
applications. Maximum
current carrying capability
is 7.5 amperes. Many
connector arrangements
offer both standard and
reverse sex contact
loading—from 8 thru 63
positions.
Series 3—Power Contacts
1
2
3
5
6
10 AWG [1.4 to 5 mm2].
Two connector sizes are
available in both standard
and reverse sex connector
arrangements 3 and 7
positions.
7
Series 4—Combination
Size 16 and Power Contacts
1
2
3
4
7
Series 3 connectors accept
Type XII power contacts
which can carry up to 25
amps per contact. These
contacts will accommodate
a wire size range of 16 to
5
6
11
10
8
13
14
16
Series 4 connectors accept
Size 16 Multimate and
Type XII power contacts,
combining the signal and
coaxial circuit capabilities of
Series 1 connectors with the
power circuit capabilities of
Series 3 connectors.
Available in two connector
sizes offering power mixing
combinations totaling 16
and 22 positions.
15
4
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Connector Series and Types (Continued)
1
Series 5—Power Contacts
.125 POWERBAND
2
Series 5 connectors combine
the revolutionary
performance of the new
AMP POWERBAND
Contact, high current
contact in configurations
similar to the Series 3
connectors. AMP
POWERBAND contacts
offer the electrical
3
2
3
1
8
9
10
Series 6—Combination,
Size 16 and .125
POWERBAND Contacts
Series 6 combines the high
current and environmental
sealing capability of
Series 5, POWERBAND
contacts, and the reliability
of signal carrying, low
current Type III+ contacts.
performance of the best Mil
Spec Size 8 screw-machined
contacts with the economy
and productivity of strip-fed,
precision formed contacts.
Series 5 connectors are
environmentally sealable to
meet IEC IP 65 and IP 67
specifications.
Rated at 600 VAC or VDC,
45 amperes maximum in
a single contact, the
connectors are available in
free-hanging and panelmount applications—one
connector configuration
containing three .125
POWERBAND contacts.
This combination of power
and signal contacts is
offered in one connector
configuration containing
two .125 POWERBAND
contacts and eight
Type III+ signal pin and
socket contacts.
MIL-C-5015 Style—Size 16
Contacts
This new addition to the AMP
Circular Plastic Connector Line
is specifically designed to be
intermateable with MetalShell size 20-14 and 18-10,
MIL-C-5015 Style connector
systems. The high impact
resistant plastic housing offers
the advantages of light weight
and lower cost than existing
metal-shell connectors. In
addition the connector design
prevents mismating when
used with other insert
arrangements. As part of
the AMP Multimate family of
connectors, the MIL-C-5015
style connector offers the
economies of crimp
Type III+ pin and socket
contacts in reel-mounted,
strip-form for high volume
automatic machine
termination, as well as in loose
piece-form for low volume,
prototype or maintenance and
repair.
Metal-Shell, Circular
Plastic Connectors
Metal-Shell CPC connectors
consist of a black
thermoplastic insert in a
nickel-plated, zinc alloy
shell. These connectors
are currently available in
shell sizes 14, 22 and 28,
and in two basic
configurations consisting
of plugs and square
flange receptacles.
Miniature CPC Connectors
These compact connectors
accept existing MiniUniversal MATE-N-LOK pin
and socket contacts,
30-18 AWG [.05-.8 mm2].
Two shell sizes (8 or 11) are
available, accommodating
from 1 to 4 and 5 to 9
positions.
Featuring high contact
density and IP67 sealing,
these durable connectors
are well suited for many
wire-to-wire, wire-to-board,
and wire-to-panel
applications.
5
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Performance Characteristics — CPC and Metal-Shell CPC Connectors
More information on the
performance of AMP CPC
and metal-shell CPC
connectors is available by
requesting the following
AMP Product Specifications:
108-10024––
CPC Connectors
108-10037––
Type XII Contacts
108-10020––
Size 20 DM and 20 DF
Contacts
108-10040––
Metal-Shell CPC
Connectors
108-10042––
Type III+ Contacts
108-1579––
Sealed CPC Connectors
with Removeable Contacts
Test Description
Procedure
Requirements
Maintenance
Aging
Contacts removed and
reinserted 10 times using
applicable tools
No damage to contacts
or housings. Contact
retention maintained
Contact Retention
Axial load applied to
contact to displace to the
rear of the connector
Contacts remain in
place when subjected to
a minimum 10 lb. load*
Dielectric Withstanding
Voltage (MIL-STD-1344,
Method 3001)
Connectors subjected to
1500 volts rms at sea
level
No breakdown or
flashover
Thermal Shock
Connectors subjected to
five cycles of temperature
change (-55°C and +125°C)
No damage
Vibration
(MIL-STD-202,
Method 204,
Test Condition B)
Connectors vibrated
(wired and mated).
Contacts wired in series
with 100 milliamperes
flowing during the test
No damage or loosening of
parts. No interruption
of electrical continuity
longer than 10 microseconds
Physical Shock
(MIL-STD-202,
Method 213A,
Test Condition A)
Connectors shocked
50 G (wired and mated).
Contacts wired in series
with 100 milliamperes
flowing during the test
No damage or loosening
of parts. No interruption of
electrical continuity longer
than 10 microseconds
Durability
Connectors mated and
unmated 25 times with tin
plated contacts and 500
times with gold plated
contacts
No wear through
damage to plating
Corrosion (Salt Spray)
(MIL-STD-202, Method 101,
Test Condition B)
Mated connectors
subjected to 5% salt
spray for 48 hours
No damage
Protection Against
Solids
a. Test wire is pushed
into mated connectors
b. Mated connectors
subjected to circulating
talcum powder
a. Must not touch live parts
b. No dust deposits
observed on mating
surfaces
Protection Against
Water
Water is projected through
jets against mated
connector from any direction
and then temporarily
immersed in water
No water deposits shall
be observed on mating
surfaces of contacts
or housings
Temperature Life
Mated connectors
subjected to a temperature
of +125°C for 200 hours
No damage
Insulation Resistance
(MIL-STD-1344,
Method 3003)
Measurement made
between adjacent contacts
with connector mated
5000 megohms
minimum ambient
temperature
Humidity
(MIL-STD-202, Method 103,
Test Condition B)
Mated connectors
subjected to 10 days
moisture test
Minimum insulation
resistance of
100 megohms
*For size 16 contacts. Size 8 contacts 25 lb. load, min.
6
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Levels of Protection for Electric Operating Material
According to IEC 60529 and IEC 60947, Appendix C
Environmentally Protected
Circular Plastic Connectors,
for Mated CPC Connectors
Utilizing Peripheral Seals
and either Wire Entry Seals
(for Discrete Wire
Applications) or Heat
Shrink Boots (for Jacketed
Cable Applications).
Available are Various
Sizes, Series 1, 5 and 6.
Internal Protection (IP)
Definition:
Per IEC 60947, Appendix C—
Pertains to low voltage switchgear and
control gear.
■ Per IEC 60529—Pertains to degrees
of protection provided by enclosures
(IP code).
■
Sample Designation:
(Where x is a numeral value), i.e. IP 65
IP Codes
IP
X1
X2
Index Letter
Degree of Protection
against ingress of solid
foreign objects
Degree of Protection
against ingress of water
Degree of
Protection, X1
Protection against ingress of
solid foreign objects
1
No Protection
Protection against objects
>50mm diameter—
including inadvertently
touched by hands
2
Protection against objects
>12.5mm—including fingers
3
4
Protection against objects
>2.5mm diameter including tools
Protection against objects
>1.0mm diameter—
including grains
Degree of
Protection, X2
0
1
2
3
4
5
Protection against ingress
of solid foreign bodies
5
6
Protection against ingress of dust
6
7
Protection against
ingress of water
No Protection
Vertical Dripping—
Protection against vertical
drops of water
Dripping <15°—
Protection against dripping
water when the enclosure is
tilted 15° from vertical
Spraying at an angle up
to 60° from vertical
Splashing—Protection
against water splashed
from any direction
Jetting—Protection against
water stream out of a nozzle,
from any direction
Powerful Jetting—Protection
against temporary flooding due
to powerful jet streams out of
a nozzle from any direction
Temporary immersion—Protection
against temporary immersion
7
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Current Carrying Capabilities
The total current capacity of
each contact in a given
connector is dependent upon
the heat rise resulting from the
combination of electrical loads
of the contacts in the connector
arrangement and the maximum
ambient temperature in which
the connector will be operating.
Caution must be taken so that
this combination of conditions
does not cause the internal
temperature of the connector to
exceed the maximum operating
temperature of the housing
material. Several variables
which must be considered
when determining this
maximum current capability for
your application are:
■
Wire Size—Larger wire will
carry more current since it
has less internal resistance
to current flow and generates
less heat. The wire also
conducts heat away from the
connector.
Current Rating Verification
Can a contact rated at 10 amps
carry 10 amps?
Maybe yes, but probably not.
The reason lies in the test
conditions used to rate the
contact. If these conditions do
not adequately reflect the application conditions, the actual
allowable current levels may be
lower than specified levels. For
example, many manufacturers,
including Tyco Electronics, test
a single contact in air. This
gives an accurate measure of
the basic current-carrying
capacity of the contact. Use the
contact alone in air and it can
certainly carry 10 ampere. Use
it in a multi-position connector
surrounded by other currentcarrying contacts or in high
ambient temperatures, and the
contact should carry less
current.
Similarly, as the contact ages
and stress relaxation, environmental cycling, and other
degradation factors take their
toll, the contact’s currentcarrying capacity decreases.
A prudent design must set
current levels for such end-of-
CONTACT CURRENT GUIDE Maximum Current (Amperes) for Largest Wire Size
75
60
Type XII Upgrade
Size 8 Upgrade
60
56
.125 POWERBAND Contact
50
45
45
Size 8
35
Type XII
Type I, Type II/III+
Upgrade
Type III+, Type II,
Type III+ Posted
30
23
13
15
11.85
Size 20 Upgrade
7.5
20 DF
0
■
Connector Size—In general,
with more circuits in a
connector, less current per
contact can be carried.
design-life (EODL) conditions.
Practical current-carrying capacity is not an absolute, but an
application-dependent condition.
New Method Simplifies Ratings
To help the designer set the
appropriate current level, Tyco
Electronics has developed a
method of specifying currentcarrying capacity. This method
takes into account the various
application factors that influence current rating.
The method can be summarized
as follows:
■ The contact is aged to EODL
conditions by durability
cycling, thermal cycling, and
environmental exposure.
■ The contact’s resistance
stability is verified.
■ The current necessary to
produce the specified temperature rise is measured. This
T-rise is usually 30°C.
■ A rating factor is determined
to allow derating of multiple
contacts in the same housing
and for different conductor
sizes.
■
Current Load Distribution—
Spreading those lines with
greater current loads throughout the connector, particularly
around the outer perimeter,
will enhance heat dissipation.
Temperature
One other factor influencing
current levels is the maximum
operating temperature, for
example, 105°C. If the application has a high ambient
temperature (over 75°C) the
contact’s T-rise is limited by
the maximum operating
temperature. For example, an
application temperature of
90°C limits the contact T-rise
to 15°C. Since current
produces heat (the I2R law), the
current must be lowered to
limit the T-rise.
A contact’s T-rise depends not
only on its I2R Joule heating, but
also on its ability to dissipate
the heat. Consider a contact in
a multi-contact housing. Joule
heating in multiple contacts will
raise the local ambient temperature. Since the contact will not
be able to dissipate its own
heat as well by convection, the
maximum T-rise will be realized
at a lower current level. Consequently, the allowable current
level must be lower to maintain
an acceptable T-rise.
For a given connector, the
current level will be set by the
■
Ambient Temperature—With
higher ambient temperatures,
less current can be carried.
loading density. A connector
containing 50% current-carrying
contacts will permit higher
currents (per contact) than a
connector will at 75% loading.
The loading percentage assumes
an even distribution of contacts
within the housing. If all 10
contacts are grouped together in
one section of a 20-position
connector, the loading density
may approach 100%.
The Importance of EODL
As stated, T-rise in a contact
depends on both resistance and
current. As it ages, a contact’s
resistance will increase. The
contact designer will specify a
maximum resistance for the
contact, this level is the end-ofdesign-life resistance. Before
the contact is tested for current,
Tyco Electronics subjects it to a
sequence of tests that exercises
the major failure mechanisms
and thereby simulates EODL
conditions. Conditioning
includes mating cycling, industrial mixed-flowing gases,
humidity and temperature
cycling, and vibration to
sequentially introduce wear,
corrosion, stress relaxation,
and mechanical disturbance.
8
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Presentation — An Example*
Current Rating
■
First, a base curve showing
current levels versus T-rise for
a single circuit and the largest
wire size (See figure 1). This
represents the maximum
current capacity of the
contact. The curve is usually
flat up to 75°C ambient and
then drops off. Up to 75°C, the
30°C T-rise limits the amount
of current, and above 75°C
the current must be reduced
to keep the combination of
ambient temperature and
T-rise from exceeding the
maximum operating temperature of 105°C.
Next are rating factors, a
table of multipliers to account
for connector loading and for
smaller wire sizes (See figure 2).
The designer first determines
the base current for the
ambient conditions of the
application; then multiplies
this base current by the rating
factors to find the current
level for the application’s
loading factor and wire size.
*Note: Data is not typical of a
specific CPC connector configuration. For specific current
rating information based on %
connector loading, contact
Tyco Electronics.
To demonstrate the method of
specifying current, consider the
following application conditions;
an ambient temperature of 65°C,
a 50% loading of contacts in
the housing, and 20 AWG
[0.6mm2] wire.
■
From Figure 1, the base
current rating is 14 ampere
with 18 AWG [0.8mm2] wire.
■
Figure 2, the rating factor for
50% loading and 20 AWG
[0.6mm2] wire is 0.68.
■
The specific rating for this
application is the product of
the base rating and the rating
factor:
14 x 0.68 = 9.5 ampere
Practical Values
The current-rating method
gives designers practical
values applicable to their applications. While the specified
current levels for a contact may
be lower than for other testing
methods, they are more practical and simplify the system
design process.
“Spec-manship” is replaced
by a realistic assessment of the
current-carrying capacity of a
contact under varying conditions of temperature, connector
loading, and wire size.
Specific current-carrying data
based on EOL and % loading is
available from Tyco Electronics.
Please contact your local
Tyco Electronics Sales Engineer
or call Tyco Electronics.
Connector/Contact Acceptability
As previously stated, choosing
the correct connector/contact
combination is fundamental
to the successful function of
all connectors. The Selector
Chart shown at right, is
designed to simplify your choice
■
Each of the contacts can
carry 9.5 ampere.
■
However, if the ambient temperature is 80°C the allowable
T-rise becomes 25°C. The base
current must be lowered to
12.8 ampere so that the 105°C
maximum operating temperature is not exceeded. The
current rating then becomes:
12.8 x 0.68 = 8.7 ampere.
Figure 1
15
Single Contact
18 AWG
10
5
Current Rating (Amperes)
■
of connectors and their acceptable contacts. Once you have
selected the wire size, currentcarrying capacity need,
number of positions required,
and the type of contacts
needed in your choice of
connector, refer to this matrix
for a quick look at exactly what
is acceptable in a given
connector type.
0
0
10
20
30
40
50
60
70
80
Ambient Temperature (°C)
90
100
Graph shows the relationship between base current, ambient
temperature, and contact T-rise.
AWG
18
20
22
24
26
Single
1
.83
.69
.59
.50
30%
.97
.80
.66
.57
.49
50%
.83
.68
.57
.48
.42
70%
.65
.53
.45
.38
.33
100%
.55
.45
.38
.32
.28
% Loading
The presentation of currentcarrying capacity in AMP
product specifications includes
two parts:
Figure 2
Rating factors allow the base current to be adjusted for various
connector loading and wire sizes.
Contact Selector Chart
Connector
Type
CPC Series 1
CPC Series 2
CPC Series 3
CPC Series 4
CPC Series 5
CPC Series 6
CPC 5015
CMC Series 1
CMC Series 2
CMC Series 3
CMC Series 4
20 DF
Type I
Type II
Type III+
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Posted
Type III+
✔
Type XII
Sub-Mini
Coax
✔
POWERBAND
Contacts
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
9
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Size 1
CPC Connectors, Series 1
for Cable or Panel Mount
Square Flange Receptacle
*G ±.025
[±0.64]
(Accepts Type III+, HighCurrent Power, Type II and
Subminiature Coax
Contacts)
CPC
Series 1
*D ±.010
[±0.25]
*J Dia.
*F ±.010
[±0.25]
*Panel Thk.
.125
[3.18] Max.
*F ±.010
[±0.25]
*E
Max.
*H
*A
Max.
*B
+.007
–.000 Dia.
[+0.18]
*Thread Size
(See chart)
Panel Cutout
±.015
[±0.38]
*C ±.010
[±0.25]
Free-Hanging Receptacle
Listed part numbers are for
connectors only; contacts
must be ordered separately.
*A
Max.
*B ±.015
[±0.38]
*C ±.010
[±0.25]
Material
Housing—Thermoplastic, 94V-0 rated,
black
±.010
*E Max.
*D [±0.25]
*L Max.
*Note:
See page 25 for callout dimensions
*Thread Size
(See chart)
Related Product Data
Contacts—Pages 17-23
Contact Arrangement—Page 24
Component Dimensions—Page 25*
Accessories—Pages 38-42, 52-54
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Plug
*K
Max.
*M Max.
*N Max.
*Thread Size
(See chart)
Standard Sex Connectors (Receptacles accept pin contacts, Plugs accept socket contacts)
Replacement Coupling Rings
Shell Size
11
13
17
23
Part No.
213811-1
213813-1
213810-1
213812-1
Arrangement
Shell
No. of
Size Positions
11-4
13-9
17-16
23-24
Keying
23-37
Molded-in keying in two configurations:
A—Standard Configuration: 5 Keys
1Four
Keying
A
A
A
B
A
B
A
B
Square Flange Receptacle
With Threaded
With Mounting
Inserts1
Holes
208130-1
208131-1
206036-8
—
211839-1
—
787610-1
—
206061-1
206705-1
206036-1
213862-1
206838-1
213866-1
206151-1
213860-1
Free-Hanging
Receptacle
Plug
206153-1
206705-2
206036-3
—
206838-2
—
206151-2
—
206060-1
206708-1
206037-1
213849-1
206837-1
213851-1
206150-1
213848-1
4-40 threaded inserts per receptacle.
Reverse Sex Connectors (Receptacles accept socket contacts, Plugs accept pin contacts)
Arrangement
B—Optional Configuration: 4 Keys to
prevent mismating of standard and
reverse sex.
Shell
No. of
Size Positions
11-4
17-14
23-37
Keying
A
A
B
A
B
Square Flange Receptacle
With Threaded
With Mounting
Inserts1
Holes
211102-1
211103-1
—
206306-5
—
206430-1
206043-1
796437-2
206306-1
213864-1
Free-Hanging
Receptacle
Plug
206430-2
206043-3
—
206306-2
—
206429-1
206044-1
796449-1
206305-1
213850-1
1Four 4-40 threaded inserts per receptacle.
Key Style “A” is the Standard 5 Locating Key arrangement. Key Style “B” is the 4 Locating Key arrangement.
10
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 1, VDE Tested
CPC Connectors, Series 1,
for Cable or Panel Mount
(Accepts Type III+, HighCurrent Power, Type II and
Subminiature Coax
Contacts)
Square Flange Receptacle
*G ±.025
[±0.64]
*F ±.010
[±0.25]
*E Max.
CPC
Series 1
*D ±.010
[±0.25]
*J Dia.
*F ±.010
[±0.25]
*Panel Thk.
.125
[3.18] Max.
+.007
*H –.000 Dia.
[+0.18]
*A
Max.
*Thread Size
(See chart)
Panel Cutout
*B ±.015
[±0.38]
*C ±.010
[±0.25]
■
■
Designed to meet
requirements of VDE as
shown in DIN
Specification 57627
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
for 600 VAC and
600 VDC service,
File No. E28476
Free-Hanging Receptacle
*A
Max.
*B
±.015
[±0.38]
*C ±.010
[±0.25]
*D ±.010
[±0.25]
*E Max.
*Note:
See page 25 for callout dimensions
*Thread Size
(See chart)
R
■
Certified by Canadian
Standards
Association,
File No. LR 7189
*L Max.
R
*K
Max.
Plug
*M Max.
Listed part numbers are for
connectors only; contacts
must be ordered separately.
*N Max.
Material
Housing—Thermoplastic, 94V-0 rated,
black
*Thread Size
(See chart)
Standard Sex Connectors (Receptacles accept pin contacts, Plugs accept socket contacts)
Contacts—Pages 17-23
Contact Arrangement—Page 24
Component Dimensions—Page 25*
Accessories—Pages 38-42, 52-54
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Replacement Coupling Rings
Shell Size
13
17
23
Square Flange Receptacle
With Threaded
With Mounting
Inserts1
Holes
211401-4
211401-1
211767-2
211767-1
211771-2
211771-1
—
213870-1
Arrangement
Related Product Data
Part No.
213813-1
213810-1
213812-1
Shell
Size
No. of
Positions
Keying
13-7
17-9
A
A
A
23-19
B
1Four 4-40 threaded inserts per receptacle.
Plug
211399-1
211766-1
211770-2
213853-1
Reverse Sex Connectors (Receptacles accept socket contacts, Plugs accept pin contacts)
Arrangement
Shell
Size
No. of
Positions
13-7
17-9
23-19
Keying
A
A
B
A
B
Square Flange Receptacle
With Threaded
With Mounting
Inserts1
Holes
211398-4
211398-1
—
211769-1
—
796439-2
—
211773-1
—
213868-1
Free-Hanging
Receptacle
Plug
211398-2
211769-3
—
—
—
211400-1
211768-1
796450-1
211772-1
213852-1
1Four 4-40 threaded inserts per receptacle.
Key Style “A” is the Standard 5 Locating Key arrangement. Key Style “B” is the 4 Locating Key arrangement.
Keying
A—Standard Configuration: 5 Keys
B—Optional Configuration: 4 Keys
11
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Circular Plastic Connectors, Series 1
1.435±.015
[36.45±0.38]
Square Flange
Receptacles, Printed
Circuit Board Mount
.094
[2.39]
1.125±.010
[28.58±0.25]
Typ.
with .025 [0.64] sq. solder tails
.420±.015
[10.67±0.38]
B
CPC
Series 1
.150
Dia.
[3.81]
4 Holes
1.435±.015
[36.45±0.38]
1.050±.010
[26.67±0.25]
Dia.
1.125±.010
[28.58±0.25]
Typ.
A
.125
Max.
[3.18]
Panel Thk.
Standard Sex (Posted Pin Contacts)
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
black
Contacts—
A—Duplex plated gold flash on entire
contact with .000030 [0.00076] min.
gold on contact engagement area, tin on
the termination area
C—Plated tin on the entire contact, tin
on the termination area
Arrangement
No.
Keying
Style
A
.816
20.73
.816
20.73
.816
20.73
.816
20.73
.816
20.73
A
B
.220
5.59
.816
20.73
.679
17.24
.674
17.12
.654
16.61
.679
17.24
.654
16.61
.679
17.24
.654
16.61
—
207825-9
A
13-7
—
1-796433-1
A
208223-9
—
A
—
1-208223-0
A
—
1-207303-5
1-207303-3
213855-4
1-207303-4
—
—
213855-3
13-9
17-16
Dimensions
A
B
.119
3.02
.220
5.59
.220
5.59
.220
5.59
.220
5.59
11-4
Related Product Data
Contact Arrangement—Page 24
Performance Characteristics—
Page 6
Technical Documents—Page 80
Receptacle Assemblies
Mounting
4-40 Threaded
Holes
Inserts
Contact
Finish
Code
Peripheral
Seal
A
N
A
N
A
N
A
N
A
C
N
A
N
A
N
A
N
C
N
A
N
A
N
A
N
213782-4
—
A
213859-2
—
B
—
213588-2
A
213798-3
—
A
Molded-in keying in two configurations:
213780-2
—
A
A—Standard Configuration: 5 Keys
213857-2
—
B
1-206934-1
—
A
.429
10.90
.618
15.70
.220
5.59
.618
15.70
.220
5.59
.429
10.90
.220
5.59
A
N
206934-5
—
208132-2
1-206934-8
213854-3
—
1-206934-7
—
—
—
A
.119
3.02
.654
16.61
A
N
Y
A
A
B
.429
10.90
.654
16.61
C
A
A
N
1-206934-9
—
A
.618
15.70
.654
16.61
A
N
Keying
23-19
23-24
B—Optional Configuration: 4 Keys to
prevent mismating of standard and
reverse sex.
23-37
Note: Posts are .017 [0.43] offset from centerline of contacts. All posts must be oriented in the same plane for proper
contact/post location.
Other Available Posted
Contacts
Tyco Electronics can make
available contacts with
various solder tail lengths
for loading into the standard
or reverse sex, square
flange receptacles for
applications requiring
custom solder tail lengths.
.119 Min.
[3.02]
.618 Max.
[15.70]
12
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 1 (Continued)
Square Flange
Receptacles, Printed
Circuit Board Mount
1.050
[26.67]
1.435±.015
[36.45±0.38]
.094±.005
[2.39±0.13]
.420±.005
[10.67±0.13]
1.125±.005
[28.58±0.13]
with .025 [0.64] sq. solder tails
1.050±.005 Dia.
[26.67±0.13]
1.435±.015
[36.45±0.38]
1.110 Max. Dia.
[28.19]
±.030
A [±0.76] Typ.
B
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
black
Contacts—
A—Duplex plated gold flash on entire
contact with .000030 [0.00076] min.
gold on contact engagement area, tin on
the termination area
C—Plated tin on the entire contact, tin
on the termination area
.125
[3.18]
Max.
Thk.
Panel
Reverse Sex (Posted Socket Contacts)
Arrangement
No.
Receptacle Assemblies
Mounting
4-40 Threaded
Holes
Inserts
Keying
Style
Contact Arrangement—Page 24
Performance Characteristics—
Page 6
Technical Documents—Page 80
Keying—Page 12
Special CPC Connectors,
Square Flange Receptacles,
Printed Circuit Board Mount
With Round Posted Contacts
(Size 16), Contact
Arrangement 17-16
17-9
17-14
23-19
Dimensions
A
B
A
.159
4.04
.704
17.88
.220
5.59
.368
9.35
.220
5.59
.159
4.04
.645
16.38
.557
14.15
.368
9.35
.536
13.61
.541
13.74
.536
13.61
.536
13.61
.536
13.61
.536
13.61
.394
10.00
.374
9.50
.374
9.50
—
—
A
B
.557
14.15
.374
9.50
1-208224-2
—
A
1-213828-6
—
A
207890-2
—
A
.368
9.35
.368
9.35
.159
4.04
.374
9.50
.374
9.50
.374
9.50
208283-4
—
A
1-788130-1
—
A
1-213826-1
—
A
213729-9
213729-6
A
1-213825-7
—
A
—
213729-8
A
213858-3
—
B
213781-9
—
A
213827-8
—
2-208224-1
213856-4
11-4
Related Product Data
CPC
Series 1
1.125±.005
[28.58±0.13]
23-37
Contact
Finish
Code
Peripheral
Seal
A
N
C
N
C
Y
A
N
C
Y
C
N
A
N
C
N
C
Y
A
N
C
N
C
Y
A
N
Note: Posts are .017 [0.43] offset from centerline of contacts. All posts must be oriented in the same plane for proper
contact/post location.
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
heat-stabilized, fire-resistant, selfextinguishing, black
Contacts—Brass
Plating—
Connector Part No. 207292-1—
Plated tin over .000050 [0.00127] min.
nickel on entire contact
Connector Part No. 207292-2—
Plated .000030 [0.00076] min. gold
over .000050 [0.00127] min. nickel on
entire contact
Notes: 1. Connector can be used for
pressure bulkhead feedthru (sealed) applications.
Notes: 2. Receptacle is Standard
Sex, supplied preloaded
with 16 special round
posted pin contacts,
.030 [0.76] diameter.
13
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 1 (Continued)
Special CPC Connectors,
Square Flange Receptacles,
With Solder Type Contacts
(Size 16), Contact
Arrangement 17-16
.420±.015
[10.67±0.38]
CPC
Series 1
.094±.010
[2.39±0.25]
1.090±.010
[27.69±0.25] Dia.
1.050±.010 Dia.
[26.67±0.25]
Panel Thk.
.125 Max.
[3.18]
.250±.015
[6.35±0.38]
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
heat-stabilized, fire-resistant, selfextinguishing, black
Contacts—Brass
Plating—
Connector Part No. 206404-1—
Plated .000030 [0.00076] min. gold over
.000030 [0.00076] min. nickel on entire
contact
Connector Part No. 206404-2—
Plated tin over .000100 [0.00254] min.
copper on entire contact
Solder Cup
Contact
.156
[3.96]
Notes: 1. Connector can be used for
pressure bulkhead feedthru (sealed) applications.
Notes: 2. Receptacle is standard
sex, supplied preloaded
with 16 special solder cup
pin contacts.
Receptacle, Feed-Thru
E .025
[0.64]
Panel Thk.
.125 Max.
[3.18]
Special CPC Connectors,
Feed-Thru
D .010
[0.25]
G Dia.
Pressure Rating up to 30 psi
B .010
[0.25]
F Dia.
(4 Holes)
Pin Both
Sides
Panel Cutout
H Max.
C .010
[0.25]
A Max.
Plug
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
black
Contacts—Copper alloy, gold over
nickel plated
J Max.
Thread Size
(See Chart)
Part Numbers
Standard
Numbering
Plug
206060-1
206037-1
Arrangement
11-4
17-16
Reverse
Numbering
Plug
206516-1
206554-1
Feed-Thru
Receptacle
206518-2
206552-1
Dimensions
Note: Feed-Thru Receptacles are
fully loaded with Size 16,
feed-thru pin contacts. Order
Size 16 crimp, snap-in socket
contacts for plugs separately.
Arrangement
11-4
17-16
A
1.209
30.71
1.209
30.71
B
.687
17.45
1.050
26.67
C
.094
2.39
.094
2.39
D
.844
21.44
1.125
28.58
Dimensions
E
1.125
28.58
1.435
36.45
F
.125
3.18
.150
3.81
G
.840
21.34
1.210
30.73
H
1.080
27.43
1.080
27.43
J
.975
24.77
1.349
34.26
Thread
Size
5/8-24
UNEF-2A
15/16-20
UNEF-2A
14
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 1 (Continued)
Square Flange Receptacles,
Right-Angle, Posted
with .025 [0.64] sq. solder tails
*A Max.
*B
*C
CPC
Series 1
*D Max.
*E Max.
.150
[3.81]
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
black
Location Wafer—Phenolic, black
Contact Posts—.000100 [0.00254]
min. tin over .000100 [0.00254] min.
copper
Contact Body—
A—.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
B—.000030 [0.000762] min. gold for a
length of .200 [5.08] min. from mating
end, with remainder gold flash, both
over .000050 [0.00127] min. nickel
Location Wafer
4 Holes
.125 Max.
[3.18]
Thk. Panel
*F
*G
.025 Sq.
[0.64]
Post Typ.
Contact
*H Dia.
*Note:
See page 25 for
callout dimensions
*F
*J Dia.
Related Product Data
Contact Arrangements—Page 24
Component Dimensions—Page 25*
Performance Characteristics—
Page 6
Keying—Standard Configuration:
5 Keys
Technical Documents—Page 80
Panel Cutout
Standard Sex (Posted Pin Contacts)
Arrangement
No.
11-4
13-7
13-9
17-9
17-16
23-19
23-24
23-37
Receptacle Assemblies
Mounting
4-40 Threaded
Holes
Inserts
1-796403-1
1-796403-2
1-796435-1
1-796435-2
1-796375-1
1-796375-2
1-796497-1
—
1-796404-1
—
1-796405-1
—
1-796387-1
—
1-796387-2
—
1-796406-1
—
Contact Body
Finish Code
Mating Plug
Part No.
B
B
B
B
B
B
A
B
B
206060-1
211399-1
206708-1
211766-1
206037-1
211770-2
206837-1
206150-1
Reverse Sex (Posted Socket Contacts)
Arrangement
No.
11-4
13-7
17-9
17-14 (shown)
23-19
23-37
Receptacle Assemblies
Mounting
4-40 Threaded
Holes
Inserts
1-796407-1
—
1-796500-1
—
1-796501-1
—
796348-3
—
796348-2
—
1-796502-1
—
1-796409-1
—
Contact Body
Finish Code
Mating Plug
Part No.
B
B
B
A
B
B
B
206429-1
211400-1
211768-1
206044-1
211772-1
206305-1
15
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 1 (Continued)
Square Flange Receptacles,
Right-Angle, Posted
with .045 [1.14] sq. solder tails.
For Higher Current Applications
Receptacle
Mail: Thermoplastic
Color: Black
Mating Face
CPC
Series 1
Major Key
.520±.015
[13.2±.381]
2.43 Ref.
[61.72]
1.33 Max.
[33.78]
.156
[3.96]
Ø 1.45 Max.
[36.83]
Ø 1.51 Max.
[38.35]
Material and Finish
Housing—Thermoplastic, 94V-0 rated,
black
Location Wafer—Phenolic, black
Contact Posts—.000100 [0.00254]
min. tin over .000100 [0.00254] min.
copper
Contact Body—
A—.000100 [0.00254] min. tin over
.000050 [0.00127] min. nickel
B—.000030 [0.000762] min. gold for a
length of .200 [5.08] min. from mating
end, with remainder gold flash, both
over .000050 [0.00127] min. nickel
.16
[4.064]
.125 Max.
[3.18]
Thk. Panel
Location Wafer
Material: Phenolic
Color: Black
1.438
[36.525]
2 PLC
1.750±.025
[44.45±.635]
2 PLC
.045 Sq.
[1.14]
Post Typ.
Contact
24 PLC
1.438
[36.525]
2 PLC
Technical Documents—Page 80
Ø .150—157
[3.81—3988]
4 Holes
Ø 1.61
[40.89]
Recommended
Panel Cutout
Standard Sex (Posted Pin Contacts)
Arrangement
No.
13-7
17-16
23-24
23-37
Receptacle Assemblies
Mounting Holes
1776903-1
1776904-1
1776905-1
1776906-1
Contact Body
Finish Code
B
B
B
B
Mating Plug
Part No.
211399-1
206037-1
206837-1
206150-1
16
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Signal Contacts
Type III+, Crimp, Snap-In
[.0625 +.0010
–.0020
Dia.
[1.588+0.025
–0.051]
Pin Body
Ferrule, Brass,
Nickel Flash
.113 Max.
[2.87] Dia.
Pin
Socket
.530±.010
[13.46±0.25]
Application Tooling—Pages 76-79
Technical Documents
114-10004 Application Specification
108-10042 Product Specification
Material and Finish — See chart.
Contact Body—Brass or phosphor bronze
Retention Spring—Stainless steel
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Range
mm2
30-28
30-26
0.05-0.09
0.05-0.15
Ins.
Dia.
Range
.015-.030
0.38-0.76
.040-.0601
1.02-1.52
.014-.0301
0.36-0.76
26-24
0.12-0.2
.035-.0551
0.89-1.40
.040-.0801
1.02-2.03
24-20
0.2-0.6
.060-.120 5
1.52-3.05
.080-.1001
2.03-2.54
Contact
Finish
Pin
18-14
0.8-1.4
.080-.1001
2.03-2.54
788088-2
—
—
788085-4
—
66429-3
66429-4
—
66406-4
1-66107-1
66107-3
66107-4
—
1-66103-8
66103-3
66103-4
1-66103-2
—
66566-7
788088-3
—
66428-3
66428-4
—
66405-4
1-66109-7
66109-3
66109-4
66109-1
1-66105-9
66105-3
66105-4
1-66105-3
66105-1
66565-7
66564-8
1-66332-4
66332-7
66332-8
—
1-66098-9S
1-66098-8
66098-8
66098-9
66098-6
1-66359-4
1-66359-5
66359-9
1-66359-0
1-66359-2
—
66563-8
1-66331-4
66331-7
66331-8
66331-2
66566-4
1-66400-0
66400-3
66400-4
—
66565-4
1-66399-0
66399-3
66399-4
66399-2
1-66100-9
1-66099-5
1-66101-9
66100-8
66100-9
—
1-66358-6
1-66358-8
66358-9
1-66358-0
1-66358-3
66358-1
66598-9
1-66598-0
66598-2
66099-3
66099-4
66099-1
1-66361-2
66361-7
66361-3
66361-4
66361-8
—
66101-3
66101-4
—
1-66360-2
66360-7
66360-3
66360-4
66360-8
66360-1
66602-8
66601-9
Sel.
Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
Sel. Gold/Nickel3
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
2.03-2.54
Sel. Gold/Nickel3
insulation crimp diameter, including crimp barrel, must not
exceed .125 [3.18].
2.000015 [0.00038] gold in the mating area over .000050 [0.00127]
min. nickel.
3.000030 [0.00076] gold in the mating area, with gold flash on
remainder, over .000050 [0.00127] min. nickel.
4.000030 [0.00076] gold in the mating area, with gold gradient on
remainder, over .000050 [0.00127] min. nickel.
Loose Piece
Contact No.
Socket
788088-1
1-66424-1
66424-7
66424-8
66394-7
66394-8
1-66108-5
66108-7
66108-8
66108-1
3-66104-0
66104-8
66104-9
2-66104-3
66104-1
1-66563-1
Sel. Gold/Nickel4
1Overall
Pin
788085-1
1-66425-2
66425-7
66425-8
66393-7
66393-8
1-66106-5
66106-7
66106-8
—
2-66102-5
66102-8
66102-9
2-66102-2
—
1-66564-2
Bright Tin
2.79-3.81
Strip Form
Contact No.
Socket
788085-3
Gold/Nickel2
.110-.150 5
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
Gold/Nickel2
.080-.1001
0.8-2.0
Socket
Sel. Gold/Nickel3
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Gold/Nickel2
Sel. Gold/Nickel3
Bright Tin
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
Gold/Nickel2
Bright Tin
18-16
CPC
Series 1
.390 Min.
[9.91]
Pin
AWG
Spring,
Stainless Steel
Spring, Stainless Steel
Bright Tin
Sel.
66597-8
Gold/Nickel3
66597-2
5Contacts
66602-2
can ONLY be used in: Metrimate; CPC Series 1 (Arr. 2324), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
6To use with the 626 Pneumatic Tool: remove crimping head from Straight
Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1,
Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without),
and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot
actuated).
66601-2
Tooling Part No.
Loose Piece
Strip Form
Hand Tool
Applicators
567867-1***
90716-1
or 567947-1***
or 680602-□***
91515-16
466598-□***
90225-2 6
466585-3***
91515-16
or
58495-1*
466321-□***
or
466908-2***
91515-16
or
58495-1*
466323-□***
or
466907-2***
91542-16
466383-4***
or 466979-1***
or 567363-□***
91523-16
or
90225-2 6
466324-□***
or
466942-1***
91505-16 or
91523-16 or
58495-1*
466325-□***
or
466906-1***
91519-16
466326-□***
or
466923-2***
91521-16
466958-1***
or
567364-□***
SStandard
reeling of strip form contacts.
*Commercial PRO-CRIMPER II hand tool for field repair only. Note:
Die Set can be adapted for use with 626 Pneumatic Tool System.
Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78]
or less), No. 200893-2 (for insulation diameters .090 [2.29] max.).
Extraction Tool Part No. 305183. (Instruction Sheet 408-1216)
***Call Technical Support for Machine Applicator Part Numbers.
17
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Signal Contacts (Continued)
CPC
Series 1
Enhanced High Current
Type III+, Crimp, Snap-In
[.0625 +.0010
–.0020
Dia.
[1.588+0.025
–0.051]
Pin Body
Spring,
Stainless Steel
Spring, Stainless Steel
.390 Min.
[9.91]
Pin
Ferrule, Brass,
Nickel Flash
.113 Max.
[2.87] Dia.
Pin
Socket
.530±.010
[13.46±0.25]
Material and Finish — See chart.
Related Product Data
Contact Body—Copper Nickel Alloy
Retention Spring—Stainless steel
Application Tooling — Pages 76-79
Technical Documents
114-10004 Application Specification
108-10024-2 Product Specification
Socket
Contact Size 16—Pin Diameter .062 [1.57]
AWG
Wire Size
Range
mm2
18-14
Strip Form
Contact No.
Socket
Loose Piece
Contact No.
Socket
Ins.
Dia.
Range
Contact
Finish
.080-.1001
2.03-2.54
Gold
1-66359-6
1-66358-9
1-66361-4
1-66360-4
Tin
1-66359-9
2-66358-1
1-66361-6
1-66360-6
.110-.1502
2.79-3.81
Gold
1-66597-0
1-66598-1
66602-9
1-66601-0
Tin
1-66597-1
1-66598-2
1-66602-0
1-66601-2
0.8-2.0
Pin
Pin
Tooling Part No.
Loose Piece
Strip Form
Hand Tool
Applicators
91519-13
91521-13
466326-□***
or
466923-2***
466958-1***
or
567364-□***
Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly,
order SAHT Adapter Part No. 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and
Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
*** Call Technical Support for Automatic Machine Applicator Part Numbers.
1
2
3
Ratings
Voltage:
Base Current:
Temperature:
VDE 0627:
250 Volts AC/DC
600 Volts AC/DC, Series I, VDE tested and select loaded only
Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire
Enhanced High Current Type III+ contacts: 25 amperes, 30˚C temperature rise with single contact on 14 AWG wire
-55˚C to +105˚C
XA/630/4KV/2 - Series I, VDE tested only
Multiplication Rating Factor (F)
Type III+ Contacts (Note: 1 = 17 amperes)
Shell Size
11-4
13-9
17-16
23-24
23-37
Percent Connector Loading
Single Circuit
Wire Size
30 AWG
14 AWG
.291
1
.278
.995
.270
.990
.281
.985
.275
.985
≅ 50%
Wire Size
30 AWG
14 AWG
.212
.905
.175
.750
.146
.625
.138
.550
.131
.497
100%
Wire Size
30 AWG
14 AWG
.140
.684
.134
.567
.127
.472
.120
.416
.114
.376
Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes)
Percent Connector Loading
Shell Size
11-4
13-9
17-16
23-24
23-37
Single Circuit
14 AWG
.880
.880
.880
.880
.880
≅ 50%
14 AWG
.840
.640
.520
.520
.440
100%
14 AWG
.640
.480
.400
.400
.320
18
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Signal Contacts (Continued)
Type III+ (Precision
Formed, Crimp)
Grounding Pin
Contact Size—16
Pin Diameter—.062 [1.57]
Related Product Data
(make first - break last)
Material and Finish
CPC
Series 1
Performance Characteristics—Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Contact Body—Copper alloy, plated
tin or gold
Spring—Stainless steel
AWG
Ins.
Dia.
Range1
Contact
Finish
Strip Form
Loose Piece
0.12-0.2
26-24
.035-.055
0.89-1.4
Tin
Sel. Gold/Nickel4
164159-3
164159-4
164162-1
164162-2
0.2-0.6
24-20
.045-.070
1.14-1.78
Bright Tin
164160-3
164163-1
Sel. Gold/Nickel4
164160-4
164163-2
0.8-1.4
18-16
.078-.098
1.98-2.49
Tin
164161-3
164164-1
Sel. Gold/Nickel4
164161-4
164164-2
Wire Size Range
mm2
Strip Form
Applicator
Part No.
Grounding Pin Part No.
Loose Piece
Hand Tool
Part No.
—
91515-15 or
58495-1*
466323-□***
or
466907-2***
466741-□***
or
680114-3***
91515-15 or
91505-15 or
58495-1*
91523-15 or
91505-15 or
58495-1*
1Overall
insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area.
use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. 217201-1,
Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
*Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
***Call Technical Support for Automatic Machine Applicator Part Numbers.
Extraction Tool Part No. 539972-1.
4Gold
5To
Material
High Current Power
Contact—Size 16
The features of the High
Current Size 16 contact
have been designed to
retrofit into the existing
AMP Connectors such as
CPC (Circular Plastic
Connector), CMC (Circular
Metal Connector), G Series,
M Series, Metrimate Square
Grid and Drawer Connector
housings. An initial T-Rise
test in free air has shown
a 23 amp capability with a
30° T-Rise. The contact may
be crimped onto
14 AWG wire with an
AMP hand tool Part No.
601967-1. Use turret TH502
(1-601967-6) for the
pin and turret TH501
(1-601967-5) for the socket.
Body—Copper alloy
Louvertac Band—Beryllium copper
Retention Spring—Stainless steel
Finish
Body—Silver
Louvertac Band—Gold
Wire Range
mm2
AWG
0.8-1.4
2
18-16
14
Pin
Loose
Piece
796964-1
193844-1
Contact Part Nos.
Socket
Tape
Loose
Tape
Mounted
Piece
Mounted
796964-2
796966-1
796966-2
193844-2
193846-1
193846-2
Crimping Tool
Turret
Tool
for
for
Pins
Sockets
601967-1 1-601967-5 1-601967-5
601967-1 1-601967-6 1-601967-5
Extraction Tool Part No. 305183
19
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Signal Contacts (Continued)
Type III+ (Precision
Formed, Solder)
Solder-Type
(with Preformed Wire Barrel/Insulation Support)
CPC
Series 1
Contact Size—16
Pin Diameter—.062 [1.57]
Material and Finish
Contact Body—Copper alloy, plated
tin or gold
Spring—Stainless steel
Related Product Data
Pin
Performance Characteristics—Page 6
Technical Documents—Page 80
Socket
Solder-Tab
Pin
Socket
Solder-Type
Pin
Pin
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Range
Solder-Tab
Socket
AWG
26-20
18-16
mm2
0.12-0.6
0.8-1.4
Solder Tab4
Contact
Finish
Gold/Nickel1
Gold/Nickel1
Duplex2
Bright Tin
Loose Piece
Contact No.
Pin
266182-1
266180-1
202236-7
202236-5
Socket
266183-1
266181-1
202237-7
202237-5
1.000030
[0.00076] gold in mating area over .000030 [0.00076] min. nickel.
plated .000030 [0.00076] gold in mating area over .000030 [0.00076] min. nickel on contact body; bright tin on
solder tab.
3Bright tin on entire contact.
4Designed for up to 14 AWG; but, not to exceed current limitation of contact.
Note: These contacts can be used in Multimate contact cavities of all connector housings.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
Extraction Tool Part No. 305183
2Duplex
20
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Signal Contacts (Continued)
Type II, Screw Machined,
Crimp
1.087±.010
[27.61±0.25]
Material
Contact Body—Brass
Retention Spring—Stainless steel
.472±.005
[11.99±0.13]
CPC
Series 1
Finish
Contact Body—.000030 [0.00076]
gold over .000050 [0.00127]
nickel. Gold thickness controlled
on socket O.D.
Retention Spring—Stainless steel
Pin
.107
[2.72] Max. Dia.
.062±.001 Dia.
[1.57±0.03]
Pin Body
Spring
Pin
Related Product Data
.795±.010
[20.19±0.25]
Application Tooling—Pages 76-79
Spring
Socket
Socket Body
Socket
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Range
AWG
mm2
28-24 0.08-0.20
24-20
18
(Two)
18-16
0.2-0.6
0.9-0.9
(Two)
0.8-1.4
14
2
Ins.
Dia.
Range1
.035-.055
0.89-1.40
.048-.065
1.22-1.65
.095-.110
2.41-2.79
.040-.062
1.02-1.57
.055-.088
1.40-2.16
No. Ins.
Support
.080-.105
2.03-2.67
No Ins.
Support
No Ins.
Support
Tape Mounted
Contact No.2
Pin
Socket
Loose Piece
Contact No.
Pin
Socket
Contact
Color
Code
201611-4
—
201611-14
201613-15
Red/Red
—
—
201334-14
201332-15
Red/Red
—
—
202410-14
202411-15
Green
201578-4
—
201578-14
201580-15
Yellow/Red
Tooling Part No.
Tape Mounted
Loose Piece
Dies for
Die Set for
Hand
AMP-TAPETRONIC 626 Pneumatic
Tool
Machine 69875
Tool System
90230-17
90249-2
—
90249-2
90230-17
201330-6
201328-9
201330-14
201328-15
Yellow/Red
—
—
202725-14
202726-14
Blue
—
—
202507-14
202508-15
—
—
—
200336-6
200333-8
200336-14
200333-14
Blue/Blue
90250-1
90231-27
—
91538-1*
or 601967-1*
601967-1*
91538-1*
or 58541-1*
or 601967-1*
—
90231-27
—
5,6
,6204219-1
—
Blue/Blue
—
—
3212618-23
201568-3
201570-14
201568-15
Violet/Blue
90250-1
90231-27
201570-2
—
†,6,3212618-13,6,†
—
—
—
—
91539-1*
or 601967-1*
90136-1*
or 601967-1*
91539-1*
58541-1*
or 601967-1*
91539-158541-1*
or 601967-1*
1Overall
insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel).
3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves.
4Use turret TH502 (1-601967-6) with hand tool 601967-1.
5Use turret TH501 (1-601967-5) with hand tool 601967-1.
6Pin length is .630±.005 [16.002±.127] on these two pins.
7Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit
Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
*Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.
†Does not use Hand Tool 91539-1 or 601967-1.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability
information on page 8.
Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less).
Extraction Tool Part No. 305183.
2For
21
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Coaxial Contacts
Subminiature Coax, Size 16
Precision Formed, Crimp
1.010
Ref.
[25.65]
CPC
Series 1
Pin
.650
[16.51] Ref.
Pin
Socket
0 .107+.005
–.000
[2.718+.127
]
–.000
Dia.
.250
[6.35]
.112+.005
A±.003
±.076
Dia.
[2.845+.127]
Dia.
Ferrule
.120
Part No. 5-225088-1— A [3.05] Dia.
Socket
.084
.086
[2.134]
[2.184]
Dia.
.235
[5.969] Max.
Part No. 225088-3— A .123 Dia.
[3.12]
Ferrule
Part No. 1-332057-0
Material
Outer Shell—Brass per MIL-C-50
Center Conductor—Beryllium copper
per QQ-C-533 (Pin); Brass per
QQ-B-626 (Socket)
Inner Dielectric—Polypropylene
Retention Spring—Stainless steel per
QQ-S-766
Ferrule—Copper per QQ-C-576
Selection Chart for Coaxial Cable
Cable Size
(RG/U)
178, 196
Finish
Outer Shell, Center Conductor—
See charts
Ferrule†—Bright tin per
MIL-T-10727
196
(Double Braid)
174, 188, 316
Related Product Data
Application Tooling—Pages 76-79
174
(Double Braid)
179, 187
187
(Double Braid)
161
Contact
Finish
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Loose Piece
Contact No.
Pin
Socket
226537-2
51565-2
—
51565-5
226537-2
51565-2
—
51565-5
226537-1
51565-1
226537-4
51565-4
226537-1
51565-1
226537-4
51565-4
226537-1
51565-1
226537-4
51565-4
226537-1
51565-1
226537-4
51565-4
226537-1
51565-1
226537-4
51565-4
Ferrule
Part No.
Tooling Part No.
Die Sets for
Hand
Hand Tool 69710-1
Tool
or 626 Pneumatic or Die Set*
Tool System
1-332057-0†
69690-27
69656-2
1-5-225088-1†
—
69656-9
1-332056-0
696907-2
1-5-225088-3
—
69656-7
1-332056-0
69690-17
91911-4*
1-5-225088-1†
—
69656-8
1-332056-0
—
—
†
†
†
91911-3*-9
1.000030
[0.00076] gold over .000050 [0.00127] nickel—outer shell and socket center conductor; .000030 [0.00076]
gold over .000100 [0.00254] copper—pin center conductor.
[0.00127] gold over .000050 [0.00127] nickel—outer shell and socket center conductor; .000050 [0.00127]
gold over .000100 [0.00254] copper—pin center conductor.
7Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1
(without); and Power Unit Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
†Does not use Hand Tool 91539-1 or 601967-1.
*Used with PRO-CRIMPER II Hand Tool Frame Part No. 354940-1.
Extraction Tool Part No. 305183
2.000050
22
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Coaxial Contacts (Continued)
Subminiature Coax, Size 16
Precision Formed, Crimp
(Continued)
Selection Chart for Twisted Pair and Shielded Wire
Wire Size
AWG
mm2
Contact
Finish
Loose Piece
Contact No.
Pin
Socket
Ferrule
Part No.
Finish
30
0.05
(Twisted Pair, Solid)
Related Product Data
Application Tooling—Pages 76-79
28 0.08-0.09
(Twisted Pair, Solid)
28 0.08-0.09
(Twisted Pair,
Stranded 7 Str.,
.0050 [0.13] Dia.)
26 0.12-0.15
(Twisted Pair, Solid
or Stranded 7 Str.,
.0063 [0.16] Dia.)
26 0.12-0.15
(Shielded, .075 [1.91]
Max. O.D.)
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
Gold/Nickel
Gold/Copper1
Gold/Nickel
Gold/Copper2
226537-3
51565-3
226537-6
51565-6
226537-3
51565-3
226537-6
51565-6
226537-3
51565-3
226537-6
51565-6
226537-3
51565-3
226537-6
51565-6
226537-1
51565-1
226537-4
51565-4
1-332057-0†
69690-27
69656-2
1-332057-0†
696907-2
91911-3*-2
1-332057-0†
69690-17
or
69690-27
91911-4*
or
69656-2
1-332057-0†
696907-2
91911-3*-2
1-332057-0†
69690-37
69656-3
CPC
Series 1
Ferrule†—Bright tin per
MIL-T-10727
Tooling Part No.
Die Sets for
Hand
Hand Tool 69710-1
Tool
or 626 Pneumatic or Die Set*
Tool System
1.000030
[0.00076] gold over .000050 [0.00127] nickel—outer shell and socket center conductor; .000030 [0.00076]
gold over .000100 [0.00254] copper—pin center conductor.
2.000050 [0.00127] gold over .000050 [0.00127] nickel—outer shell and socket center conductor; .000050 [0.00127]
gold over .000100 [0.00254] copper—pin center conductor.
7Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1
(without); and Power Unit Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
*Used with PRO-CRIMPER II Hand Tool Frame Part No. 354940-1.
Note: A ferrule is required for each pin and socket.
Extraction Tool Part No. 305183.
23
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Contact Arrangements, Series 1
.093 .093
[2.36] [2.36]
.185 .000 .185
[4.7]
[4.7]
Shell Sizes 11 and 13
.110
.110
[2.79] .000 [2.79]
1
.150
.150
[3.81] .000 [3.81]
2
.160 [4.06]
.150 [3.81]
CPC
Series 1
.110 [2.79]
3
5
.000
.000
.000
6
.110 [2.79]
7
.150 [3.81]
.160 [4.06]
.155
[3.94]
Arrangement 13-7
Max. Wire Ins. Dia. = .100 [2.54]
Arrangement 11-4
Max. Wire Ins. Dia. = .100 [2.54]
Shell Size 17
.197
[5]
.150
[3.81]
.000
.197
[5]
.000
Arrangement 13-9
Max. Wire Ins. Dia. = .100 [2.54]
.000
.193 .043 .032 .182
[4.9] [1.09] [0.81] [4.62]
.150
[3.81]
.225 .075 .075 .225
[5.72] [1.90] [1.90] [5.72]
.268
[6.81]
.118
[3]
.107 .257
[2.72] [6.53]
.260 [6.6]
.205 [5.21]
.197 [5]
.130 [3.3]
.075 [1.91]
.000
.000
.000
.075 [1.91]
.130 [3.3]
.197 [5]
.205 [5.21]
.260 [6.6]
.150
[3.81]
Arrangement 17-9
Max. Wire Ins. Dia. = .150 [3.81]
Arrangement 17-14
Max. Wire Ins. Dia. = .100 [2.54]
Shell Size 23
.364 .182
.182 .364
[9.25] [4.62] .000 [4.62] [9.25]
.394
.197 .000 .197
.394
[10.01]
[5]
[5] [10.01]
.296 .098 .098 .296
[7.52] [2.49] [2.49] [7.52]
.455 .273 .091 .091 .273 .455
[11.56] [6.93] [2.31] [2.31] [6.93] [11.56]
.150 [3.81]
Arrangement 17-16
Max. Wire Ins. Dia. = .100 [2.54]
.375 .225 .075 .075 .225 .375
[9.52] [5.72][1.90] [1.90] [5.72][9.52]
.450 .300 .150
.150 .300 .450
[11.43] [7.62] [3.81] .000 [3.81] [7.62] [11.43]
.342 [8.69]
.390 [9.91]
.316 [8.03]
.171 [4.34]
.260 [6.6]
.158 [4.01]
.130 [3.3]
.000
.000
.000
.130 [3.3]
.158 [4.01]
.171 [4.34]
.260 [6.6]
.316 [8.03]
.390 [9.91]
.342 [8.69]
.150 [3.81]
.182 [4.62]
Arrangement 23-19
Max. Wire Ins. Dia. = .150 [3.81]
Arrangement 23-24
Max. Wire Ins. Dia. = .150 [3.81]
Arrangement 23-37
Max. Wire Ins. Dia. = .100 [2.54]
Note: Contact arrangements shown are for pin mating face (plug or receptacle). Socket mating face is mirror image.
24
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Component Dimensions, Series 1
Square Flange Receptacle
G ±.025
[±0.64]
F ±.010
[±0.25]
Panel Thk.
.125
[3.18] Max.
F ±.010
[±0.25]
E Max.
CPC
Series 1
D ±.010
[±0.25]
J Dia.
+.007
*H –.000 Dia.
[+0.18]
Thread Size
(See chart)
Panel Cutout
A
Max.
B ±.015
[±0.38]
C ±.010
[±0.25]
Free-Hanging Receptacle
A
Max.
B
±.015
[±0.38]
C ±.010
[±0.25]
D ±.010
[±0.25]
E Max.
L Max.
K
Max.
Thread Size
(See chart)
Plug
M Max.
N Max.
Thread Size
(See chart)
Shell
Size
Sex
Rev.
11
Std.
13
Std.
Rev.
17
Std.
Rev.
23
Std.
Dimensions
A
1.070
27.18
1.350
34.29
1.350
34.29
1.070
27.18
1.350
34.29
1.070
27.18
1.350
34.29
B
C
D
E
F
G
H
J
K
L
.420
10.67
.094
2.39
.687
17.45
.740
18.8
.844
21.44
1.125
28.58
.125
3.18
.840
21.34
.817
20.75
.935
23.75
.420
10.67
.094
2.39
.812
20.62
.879
22.33
.969
24.61
1.281
32.54
.125
3.18
.979
24.87
.874
22.2
1.072
27.23
.420
10.67
.094
2.39
1.050
26.67
1.110
28.19
1.125
28.58
1.435
36.45
.150
3.81
1.210
30.73
1.161
29.49
1.310
33.27
.520
13.21
.156
3.96
1.438
36.53
1.510
38.35
1.438
36.53
1.750
44.45
.150
3.81
1.610
40.89
1.505
38.23
1.733
44.02
M
1.365
34.67
1.080
27.43
1.080
27.43
1.365
34.67
1.080
27.43
1.365
34.67
1.080
27.43
N
Thread
Size
.975
24.77
5/8-24
UNEF-2A
1.105
28.07
3/4-20
UNEF-2A
1.349
34.26
15/16-20
UNEF-2A
1.788
45.42
1-3/8-18
UNEF-2A
25
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Circular Plastic Connectors, Series 2
CPC Connectors, Series 2
for Cable or Panel Mount
Square Flange Receptacle
*G ±.035
[±0.64]
(Accepts Size 20 DM or DF Crimp,
Snap-In Contacts)
*F ±.010
[±0.25]
Panel Thk.
.125
[3.18] Max.
*J Dia.
*F ±.010
[±0.25]
*E Max.
*D ±.010
[±0.25]
+.007
*H –.000 Dia.
[+0.18]
*Thread Size
(See chart)
*A
Max.
Panel Cutout
*B ±.015
[±0.38]
CPC
Series 2
*C ±.010
[±0.25]
Listed part numbers are for
connectors only; contacts must
be ordered separately.
*Note:
See page 32 for callout dimensions
Free-Hanging Receptacle
*D ±.010
[±0.25]
Material
Housing—Thermoplastic, 94V-0 rated,
black
*L Max.
*E Max.
*Thread Size
(See chart)
*B ±.015
[±0.38]
*A Max.
*K Max.
*C ±.010
[±0.25]
Related Product Data
Contacts—Pages 29-30
Contact Arrangement—Page 31
Component Dimensions—Page 32*
Accessories—Pages 38-42
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Plug
*M Max.
*N Max.
*Thread Size
(See chart)
Standard Sex Connectors
(Receptacles accept Size 20 DM or DF pin contacts, Plugs accept Size 20 DM or DF socket contacts)
Square Flange Receptacle
With Mounting
With Threaded
Holes
Inserts1
205841-1
205841-3
206486-1
206852-8
205840-3
205840-4
205843-1
—
Arrangement
11-8
11-9
17-28
23-63
1Four
Free-Hanging
Receptacle
Plug
205841-2
206486-2
206152-1
205843-2
205838-1
206485-1
205839-3
205842-1
4-40 threaded inserts per receptacle.
Reverse Sex Connectors
(Receptacles accept Size 20 DM or DF socket contacts, Plugs accept Size 20 DM or DF pin contacts)
Replacement Coupling Rings
Shell Size
11
17
23
Part No.
213811-1
213810-1
213812-1
Arrangement
11-8
17-28
23-57
Square Flange Receptacle
With Mounting
With Threaded
Holes
Inserts1
206433-1
206433-3
206038-1
206038-4
206438-1
—
Free-Hanging
Receptacle
Plug
206433-2
206038-2
206438-2
206434-1
206039-1
206437-1
1Four
4-40 threaded inserts per receptacle.
Note: For Standard and Reverse Sex Connectors the maximum wire insulation diameter is .068 [1.73].
26
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 2 (Continued)
Receptacles, Printed
Circuit Board Mount
with .025 [0.64] sq. solder tails
A
B
Housing—Thermoplastic, 94V-0 rated,
black
Contacts—
A—Duplex plated gold flash on entire
contact with .000030 [0.00076] min.
gold on contact engagement area,
tin on the termination area, all over
.000050 [0.00127] min. nickel underplating
B—Plated gold flash on the entire
contact, tin on the termination area
CPC
Series 2
Material and Finish
Standard Sex (Posted Pin Contacts)
Arrangement
Shell
No. of
Size Positions
Receptacle Assemblies
Mounting
Holes
4-40 Threaded
Inserts1
1-206852-2
—
1-206852-1
—
1-207369-1
—
1-207369-3
—
1-206455-2
—
1-206455-1
—
11-9
17-28
Related Product Data
Contact Arrangement—Page 31
Performance Characteristics—
Page 6
Technical Documents—Page 80
Accessories—Pages 38-42
23-63
1Four
Dimensions
A
B
.125
3.18
.352
8.94
.125
3.18
.352
8.94
.227
5.77
.449
11.40
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.338
8.59
.338
8.59
Contact
Finish
Code
A
A
A
A
A
A
4-40 threaded inserts per receptacle.
Reverse Sex (Posted Socket Contacts)
Arrangement
Shell
No. of
Size Positions
Receptacle Assemblies
Mounting
Holes
4-40 Threaded
Inserts1
1-208657-1
—
—
1-208657-0
1-207216-6
—
1-207216-7
—
1-796329-1
—
11-8
17-28
23-57
1Four
Dimensions
Contact
Finish
Code
A
B
.352
8.94
.574
14.58
.125
3.18
.352
8.94
.285
7.24
.230
7.24
.230
5.84
.230
5.84
A
.232
5.89
.333
8.46
A
A
B
A
4-40 threaded inserts per receptacle.
Other Available
Posted Contacts
Tyco Electronics can
make available contacts
with various solder tail
lengths for loading into the
standard or reverse sex,
square flange receptacles
for applications requiring
custom solder tail lengths.
.125 [3.18] Min.
.574 [14.58] Max.
27
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 2 (Continued)
Special CPC Connectors,
Series 2
Square Flange Feed-Thru Receptacles
(with Permanently Sealed .040 [1.02] Dia. Solid Pins)
(Pressure rated up to 30 psi)
E ±.025
[±0.64]
Panel Thk.
.125 Max.
[3.18]
G Dia.
D ±.010
[±0.25]
B ±.010
[±0.25]
D ±.010
[±0.25]
Pin Both
Sides
+.007
F –.000 Dia.
[+0.18]
C
Panel Cutout
A Max.
Listed plug connector part numbers
are for connectors only; contacts
must be ordered separately.
CPC
Series 2
±.010
[±0.25]
H Max.
Plug
Material
Housing—Thermoplastic, 94V-0 rated,
black
Feed-Thru Contacts—Copper alloy,
plated gold over nickel
J Max.
Thread Size
(See chart)
Related Product Data
Socket Contacts (for Plugs)—
Pages 29-30
Contact Arrangement—Page 31
Performance Characteristics—
Page 6
Accessories—Pages 38-42
Technical Documents—Page 80
Arrangement
No.
11-8
17-28
A
1.035
26.29
1.040
26.42
B
.688
17.48
1.050
26.67
C
.188
4.78
.188
4.78
Dimensions
D
E
F
.844
1.125
.125
21.44
28.58
3.18
1.125
1.435
.150
28.58
36.45
3.81
G
.840
21.34
1.210
30.73
H
.800
20.32
.800
20.32
J
.975
24.77
1.349
34.26
Thread
Size
5/8-24
UNEF-2A
15/16-20
UNEF-2A
Part Numbers
Arrangement
No.
11-8
17-28
Standard
Numbering
Plug
205838-1
206125-1
Reverse
Numbering
Plug
206460-1
206126-1
Square Flange
Feed-Thru
Receptacle
206458-1
206127-1
Note: One plug must have standard numbering of cavities, and the other plug must have reverse numbering
of cavities.
28
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Signal Contacts
With Insulation Support
Size 20 DF,
Precision Formed,
Crimp Contacts
.085 Dia.
[2.16]
Max.
Contact Size—20
Pin Diameter—.040 [1.02]
*Test Current—7.5 ampere
(Single contact, free-air test current;
not to be construed as contact rating
current. Use only for testing.)
.390
[9.91]
.575
[14.61]
*Note: Total current capacity of each
contact in any given connector is
dependent on the heat rise resulting
from the combination of electrical loads
of all contacts in the connector
arrangement and the maximum ambient
temperature in which the connector will
be operating. See page 8.
.0400±.0015
Dia.
[1.02±0.034]
CPC
Series 2
.150
[3.81]
Localized Gold Plate Area
Pin
Pin
.370
[9.34]
.555
[14.1]
Socket
.085 Dia.
[2.16]
Max.
Material
Pin Body—Brass
Socket—Phosphor bronze
Contact Finish
A—Select gold flash over nickel
on entire contact, with additional
.000030 [0.00076] gold on
mating end
B—Duplex plated .000030
[0.00076] gold on mating end, tin
on termination end, with entire
contact nickel underplated
C—Gold flash over nickel on entire
contact
D—Duplex plated gold flash on
mating end, tin on termination end,
with entire contact nickel
underplated
Related Product Data
Application Tooling—Pages 76-79
Technical Documents—Page 80
Product Specification—108-40005
Insertion/Extraction Tool
Part No. 91285-1
Instruction Sheet—408-9404
This tool includes interchangeable
tips to Insert/Extract:
Size 22, 28-22 AWG
[0.08-0.03 mm2] Crimp Contacts
Size 20, 28-20 AWG [0.08-0.6 mm2]
Crimp and Solder Cup Contacts
Size 20, Posted Contacts
.100
[2.54]
Localized Gold Plate Area
Socket
Wire
Size
Range
28-24
AWG
[0.08-0.2
mm2]
Ins. Contact
Dia.
Code
Max. Finish
.040
1.02
.060
1.52
26-22
AWG
[0.12-0.4
mm2]
.050
1.27
24-20
AWG
[0.2-0.6
mm2]
.060
1.52
A
B
C
D
A
B
D
A
B
C
D
A
B
C
D
Contact Part Nos.
Pin
Strip Form
66507-3
1658540-4
66507-4
1658540-1
66682-2
5066682-9
5066682-6
745254-2
1658544-2
745254-3
1658544-3
66506-3
1658539-1
66506-4
1658539-2
Tooling
Socket
Loose Piece
Strip Form
66507-9
66505-3
1658540-5
1658538-2
1-66507-0
66505-4
1658540-2
1658538-3
66682-4
66683-2
—
1-5066683-0
—
5066683-7
745254-6
745253-2
1658544-1
1658543-2
745254-7
745253-3
1-745254-6
1658543-3
66506-9
66504-3
1658539-3
1658537-3
1-66506-0
66504-4
1658539-4
1658537-1
Loose Piece
66505-9
—
1-66505-0
5-66505-9
66683-4
—
—
745253-6
1658543-1
745253-7
1-745253-6
66504-9
1658537-4
1-66504-0
1658537-2
Strip Form
Applicator††
Hand
Tool
Color
Code
(Loose
Piece)
466423-□††
Blue
or 466901-1†† 91503-15 Dot
or 1016015-1††
466758-2††
Black
or 466963-1†† 91549-15
Dot
or 567804-1††
466968-1††
Yellow
or 567036-□†† 91525-15 Dot
or 567849-1††
466422-□††
or 466900-1†† 91503-15
or 567801-1††
or 1016002-1††
Red
Dot
5To
use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT)
Assembly, order SAHT Adapter Part No 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1
(without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,
contact Technical Support.
Note: Commercial PRO-CRIMPER III Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2 mm2]
(Ins. Dia. Max. .040 [1.02]), and Wire Size 24-20 AWG [0.2-0.6 mm2] (Ins. Dia. Max. .060 [1.52])—Part No. 58448-2.
Note: Die Set Part No. 58448-3 can be adapted for use with the 626 Pneumatic Tool System.
29
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Signal Contacts (Continued)
Size 20 DM,
Screw-Machined,
Crimp Contacts
Pin Diameter—.040 [1.02]
Test Current*—7.5 amperes (Single
contact, free-air test current; not to be
construed as contact rating current.
Use only for testing.)
Material and Finish
CPC
Series 2
Pin Body—Copper alloy per
QQ-B-626
Socket Body—Beryllium copper
per QQ-C-530
Socket Sleeve—Passivated stainless
steel per QQ-S-766
Plating pin and socket body—
.000050-.000100 [0.00127-0.00254]
min. gold over .000100-.000150
[0.00254-0.00381] min. copper
Pin
M39029/64-369
(Supersedes M24308/11-1)
Socket
M39029/63-368
(Supersedes M24308/10-1)
Tape Mounted Loose Piece Contacts
Wire Size
Contact
Contacts2
Range1 Ins. Dia.
Military
Part
(Max.) Configuration
Part
2
No. (M39029/)
No.
AWG mm
No.
24-20 0.2-0.6 .068
1.73
1Overall
Pin
Socket
205089-2
205090-2
64-369
63-368
Hand Tool Nos.
Positioner Nos.
Military
(M22520/)
Part
No.
Military
(M22520/)
Part
No.
02-01
601966-1
2-08
601966-5
205089-1
205090-1
insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
[0.00038] gold in the mating area over .000050 [0.00127] nickel.
2.000015
.085
Dia.
[2.16]
Max.
Gold plating per MIL-G-45204
Copper plating per MIL-C-14550
.133
[9.58]
Max.
.580
[14.73]
Type 20 DF, Solder
Contacts
.390
[9.91]
Pin Diameter—.040 [1.02]
.0400±.0015
[1.02±0.034] Dia.
Test Current*—7.5 amperes (Single
contact, free-air test current; not to be
construed as contact rating current. Use
only for testing.)
Material and Finish
.150
[3.81]
Localized
Gold Plate
Area
Pin
Pin—Brass, plated gold flash over
nickel on entire contact with additional
.000030 [0.00076] min. gold on
mating end
Socket—Phosphor bronze, plated
gold flash over nickel on entire contact
with additional .000030 [0.00076] min.
gold on mating end
*Note: Total current capacity of
each contact in a given connector is
dependent on the heat rise resulting
from the combination of electrical
loads of all contacts in the connector
arrangement and the maximum
ambient temperature in which the
connector will be operating. See
page 8.
.560 Ref.
[14.23]
.085
Dia.
[2.16]
Max.
.070
Dia.
[1.78]
Max.
Socket
Strip Form
Contact No.
Pin
Socket
66570-2
66569-2
Loose Piece
Contact No.
Pin
Socket
66570-3
66569-3
Note: Contacts to be soldered to wire before being inserted into
housing, 18 AWG [0.8 - 0.9 mm2] max. wire size.
30
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Contact Arrangements, Series 2
Note: Contact arrangements
shown are of pin mating face
(plug or receptacle). Socket
mating face is mirror image.
Shell Size 11
.062
.062
[1.57] [1.57]
.124
[3.15] .000
.124
[3.15]
.124 [3.15]
.141 [3.58]
.033 [0.84]
.000
.091 [2.31]
[.334 Dia.
[8.48]
45°
Arrangement 11-8
Max. Wire Ins. Dia. = .068 [1.73]
Arrangement 11-9
Max. Wire Ins. Dia. = .068 [1.73]
CPC
Series 2
Shell Size 17
.248 .124
.124 .248
[6.3] [3.15] .000 [3.15] [6.3]
.310 .186 .062 .062 .186 .310
[7.87] [4.72] [1.57] [1.57] [4.72] [7.87]
.294 [7.47]
.170 [4.32]
.062 [1.57]
.000
.062 [1.57]
.170 [4.32]
.124 [3.15]
.294 [7.47]
Arrangement 17-28
Max. Wire Ins. Dia. = .068 [1.73]
Shell Size 23
.434 .310 .186 .062 .062 .186 .310 .434
[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]
.372 .248 .124
.124 .248 .372
[9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45]
.496 .372 .248 .124
.124 .248 .372 .496
[12.6] [9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45] [12.6]
.434 .310 .186 .062 .062 .186 .310 .434
[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]
.448 [11.38]
.443 [11.25]
.340 [8.64]
.319 [8.1]
.232 [5.89]
.212 [5.38]
.108 [2.74]
.105 [2.67]
.000
.000
.019 [0.48]
.108 [2.74]
.143 [3.63]
.232 [5.89]
.250 [6.35]
.340 [8.64]
.357 [9.07]
.448 [11.38]
.464 [11.79]
.124 [3.15]
.124 [3.15]
Arrangement 23-57
Max. Wire Ins. Dia. = .068 [1.73]
Arrangement 23-63
Max. Wire Ins. Dia. = .068 [1.73]
31
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Component Dimensions, Series 2
Square Flange Receptacle
G ±.025
[±0.64]
F ±.010
[±0.25]
Panel Thk.
.125
[3.18] Max.
J Dia.
F ±.010
[±0.25]
E Max.
D ±.010
[±0.25]
+.007
*H –.000 Dia.
[+0.18]
Thread Size
(See chart)
A
Max.
Panel Cutout
CPC
Series 2
B ±.015
[±0.38]
C ±.010
[±0.25]
Free-Hanging Receptacle
D ±.010
[±0.25]
L Max.
E Max.
Thread Size
(See chart)
B ±.015
[±0.38]
A Max.
C
K
Max.
±.010
[±0.25]
Plug
M Max.
N Max.
Thread Size
(See chart)
Arrangement
No.
11-8
11-9
17-28
23-57
23-63
A
.809
20.55
.809
20.55
.924
23.47
B
.420
10.67
.420
10.67
.420
10.67
C
.094
2.39
.094
2.39
.156
3.96
D
.688
17.48
1.050
26.67
1.438
36.53
E
.630
16
.943
23.95
1.515
38.48
F
.844
21.44
1.125
28.58
1.438
36.53
Dimensions
G
1.125
28.58
1.435
36.45
1.750
44.45
H
.125
3.18
.150
3.81
.150
3.81
J
.840
21.34
1.210
30.73
1.610
40.89
K
.817
20.75
1.161
29.49
1.500
38.1
L
.935
23.75
1.310
33.27
1.733
44.02
M
.800
20.32
.800
20.32
.915
23.24
N
.975
24.77
1.349
34.26
1.788
45.42
Thread
Size
5/8-24
UNEF-2A
15/16-20
UNEF-2A
1-3/8-18
UNEF-2A
Note: All dimensions apply to both standard and reverse sex connectors.
32
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connectors, Series 3
CPC Connectors, Series 3
Square Flange Receptacle
*G ±.025
[±0.64]
*F ±.010
[±0.25]
Panel Thk.
.125
[3.18] Max.
*J Dia.
*F ±.010
[±0.25]
*E Max.
*D ±.010
[±0.25]
+.007
*H –.000 Dia.
[+0.18]
Panel Cutout
*Thread Size
(See chart)
Listed part numbers are for
connectors only; contacts must
be ordered separately.
*A
Max.
*B ±.015
[±0.38]
*C ±.010
[±0.25]
Material
Housing—Thermoplastic, 94V-0 rated,
black
Free-Hanging Receptacle
*A
Max.
Plug
Contacts—Page 34–35
Contact Arrangement—Page 35
Component Dimensions—Page 36*
Accessories—Pages 38-42
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
CPC
Series 3
Related Product Data
*Note:
See page 36 for Callout Dimensions
*B
±.015
[±0.38]
*C ±.010
[±0.25]
*E Max.
*D ±.010
[±0.25]
*L Max.
*Thread Size
(See chart)
*K
Max.
*M Max.
Plug
*N Max.
*Thread Size
(See chart)
Standard Sex Connectors
(Receptacles accept Type XII Male/pin contacts, Plugs accept Type XII Female/socket contacts)
Arrangement
17-3
23-7
1Four
Square Flange Receptacle
With
With
Mounting Holes
Threaded Inserts1
206036-2
213581-1
206137-1
206137-5
Free-Hanging
Receptacle
Plug
206207-1
206137-2
206037-2
206136-1
4-40 threaded inserts per receptacle.
Reverse Sex Connectors
(Receptacles accept Type XII Female/socket contacts, Plugs accepts Type XII Male/pin contacts)
Arrangement
Replacement Coupling Rings
Shell Size
17
23
Part No.
213810-1
213812-1
17-3
23-7
Square Flange Receptacle
With
With
Mounting Holes
Threaded Inserts1
206425-1
206425-5
206227-1
206227-6
Free-Hanging
Receptacle
Plug
206425-2
206227-2
206426-1
206226-1
1Four
4-40 threaded inserts per receptacle.
Note: Maximum wire insulation diameter is .220 [5.59].
33
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Power Contacts, Series 3
Type XII, Precision
Formed, Crimp
.615
[15.62]
Material
.230 Max.
[5.84]
Copper
Finish
.978 Ref.
[24.84]
A—Tin
B—.000030 [0.00076] selective gold
over .000030 [0.00076] nickel
C—.000100 [0.00254] silver plated
contacts with lubricant added
.230 Max.
[5.84]
Male
Silver or Gold—35 amperes ‡
Tin—15 amperes ‡
Male
.637
[16.18]
‡Single contact, free-air test current;
not to be construed as contact
rating current. Use only for testing.
Refer to contact current carrying
capability information, page 8.
CPC
Series 3
.027 Ref.
[0.686]
.287±.006
[7.29±0.152]
Test Current Rating
.085
[2.16]
Related Product Data
.200 Min.
[5.08]
Application Tooling—Pages 76-79
Technical Documents—Page 80
.185
[4.7]
.230 Max.
[5.84]
.287
[7.29]
1.500 Ref.
[38.1]
.027
[0.686]
Ref.
.230 Max.
[5.84]
Female
.015 Cutoff
[0.38]
(Loose Piece Only)
1.267 Ref.
[32.18]
Female
Extraction Tool Part No. 91019-3
Wire Size
Range1
AWG
mm2
Ins.
Dia.
Range
Contact
Finish
A
16 1.25-1.4
and
and
14-12
2-3
.135-.160
3.43-4.06
B
5C5
A
10
5-6
.190-.220
4.83-5.59
B
5C5
Strip Form Contact Part Nos.
Heavy Duty
Standard***
Miniature***
Male
Female
Male
Female
66255-1
266256-12
66255-2
266256-22
66255-7
266256-62
66253-1
266254-12
66253-2
266254-22
66253-4
266254-42
66740-7
—
66740-5
—
66740-1
—
66741-7
—
66741-5
—
66741-1
—
66255-5
266256-52
66255-6
266256-42
66255-8
266256-72
66253-5
—
66253-6
—
66253-8
—
1-66740-2
—
1-66740-1
—
1-66740-9
—
1-66741-2
—
1-66741-1
—
1-66741-9
—
Loose Piece
Contact
Part Nos.
Male
Female
66261-1
266262-12
66261-2
266262-22
66261-4
266262-42
66259-1
266260-12
66259-2
266260-22
66259-4
266260-42
66740-8
—
66740-6
—
66740-2
—
66741-8
—
66741-6
—
66741-2
—
Tooling
Die Set for
Heavy Duty Hand
Tool 69710-1
Miniature
or
626
Pneumatic
Applicator
Tool System
567455-□***
90145-23,7
and
90145-14,7
567021-□***
90140-17
1Wire
strip length—.281 [7.14].
contact.
3Die insert Part No. 90145-2 is for crimping 16 AWG [1.25-1.4 mm2] wire.
4Die insert Part No. 90145-1 is for crimping 14-12 AWG [2-3 mm2] wire.
5Recommended for high current/vibration applications where fretting corrosion is a problem.
7Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit
Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).
Extraction Tool No. 91019-3.
***Call Technical Support for Automatic Machine Applicator Part Numbers.
2Ground
34
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Power Contacts, Series 3 (Continued)
High Current Type XII
Crimp Contacts
Material
High Current
Type XII Pin
Part No. 193991-4
High Current
Type XII Socket
Body — Copper Alloy
Louvertac Band — Beryllium Copper
Retention Spring — Stainless Steel
Finish
Body — Silver
Louvertac Band — Gold
Part No. 193990-2
Extraction Tool Part No. 224155-1
Current Rating for 30°C Temperature Rise
100% Energized
TEMPERATURE
RISE(Wire-to-Wire)
VS CURRENT
3 Circuit Connector
Current-Carrying Capacity
The graph shows current-carrying
capacity versus temperature rise for
a fully energized 3 position CPC
plug P/N 206037-2 and receptacle
P/N 206036-2. These initial
representative amperage ratings
were conducted with 8 AWG wires
that were 3 feet long.
50
40
CPC
Series 3
TEMPERATURE RISE (DEGREES C)
The Multimate features of the High
Current Type XII contact have been
designed to fit into the existing AMP
Connectors such as CPC (Circular
Plastic Connector), CMC (Circular
Plastic Metal-Shell Connector),
G Series, M Series, and CMPC
(Circular Multipin Connector)
housings. An initial T-Rise test in
free air has shown a 60 amp
capability with a 30° T-Rise with
8 gage wires. The contact may be
crimped onto 8 AWG wire with a
Daniels Hand Tool M310 or AMP
P/N 356114-1 and Positioner
TP1068 or AMP P/N 356119-1.
30
20
10
0
0
10
20
30
40
50
60
70
CURRENT IN AMPS
Contact Arrangements, Series 3
Shell Size 17
Shell Size 23
.343
[8.71]
.172
[4.37] .000
.172
.343
[4.37] [8.71]
.148
.148
[3.76] .000 [3.76]
.296 [7.52]
.107 [2.72]
.000
.000
.213 [5.41]
.296 [7.52]
Arrangement 17-3
Max. Wire Ins. Dia. = .220 [5.59]
Arrangement 23-7
Max. Wire Ins. Dia. = .220 [5.59]
Note: Contact arrangements shown are of pin mating face (plug or receptacle).
Socket mating face is mirror image.
35
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Component Dimensions, Series 3
Square Flange Receptacle
G ±.025
[±0.64]
Panel Thk.
.125
[3.18] Max.
D ±.010
[±0.25]
F ±.010
[±0.25]
J Dia.
F ±.010
[±0.25]
E Max.
+.007
*H –.000 Dia.
[+0.18]
Thread Size
(See chart)
Panel Cutout
A
Max.
Free-Hanging
Receptacle
B ±.015
[±0.38]
C ±.010
[±0.25]
CPC
Series 3
Free Hanging Receptacle
A
Max.
B
±.015
[±0.38]
C ±.010
[±0.25]
E Max.
D ±.010
[±0.25]
L Max.
K
Max.
Thread Size
(See chart)
Plug
M Max.
N Max.
Thread Size
(See chart)
Arrangement
No.
17-3
23-7
A
1.635
41.53
1.635
41.53
B
.420
10.67
.520
13.21
C
.094
2.39
.156
3.96
D
1.050
26.67
1.438
36.53
E
1.110
28.19
1.510
38.35
F
1.125
28.58
1.438
36.53
Dimensions
G
1.435
36.45
1.750
44.45
H
.150
3.81
.150
3.81
J
1.210
30.73
1.610
40.89
K
1.161
29.49
1.505
38.23
L
1.310
33.27
1.733
44.02
M
1.645
41.78
1.645
41.78
N
1.349
34.26
1.788
45.42
Thread
Size
15/16-20
UNEF-2A
1-3/8-18
UNEF-2A
Note: All dimensions apply to both standard and reverse sex.
36
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Circular Plastic Connectors, Series 4
CPC Connectors, Series 4,
Standard Sex
Square Flange Receptacle (Accepts Type XII Male and Multimate pin contacts)
1.750±.025
[44.45±0.64]
1.438±.010
[36.53±0.25]
Panel Thk.
.125
[3.18] Max.
1.610
[40.89] Max.
1.510 Max.
[38.35] Max.
1.438±.010
[36.53±0.25]
1.438±.010
[36.53±0.25]
+.007
.150 –.000 Dia.
[3.81+0.18]
Thread Size
1-3/8-18 UNEF-2A
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Material
Housing—Thermoplastic, 94V-0 rated,
black; 23-9M – Nylon 6/6, glass filled,
black
.520±.015
[13.21±0.38]
.156±.010
[3.96±0.25]
Free-Hanging Receptacle (Accepts Type XII Male and Multimate pin contacts)
.520±.015
[13.21±0.38]
1.635
[41.53]
Max.
NEW
.000
.296 .079
.079 .296
[7.52] [2.01] [2.01] [7.52]
.156±.010
[3.96±0.25]
Related Product Data
Max
1.510 Max.
[38.35]
1.438±.010
[36.53±0.25]
Thread Size
1-3/8-18 UNEF-2A
1.733 Max.
Max.
[44.02]
.172
[4.37]
1.505 Max.
Max.
[38.23]
Max.
1.645
[41.78] Max.
.343
[8.71]
Arrangement 23-9M
1.788Max.
[45.42] Max.
Part No.
213812-1
Thread
Size
1-3/8-18
UNEF-2A
Contact Arrangements,
Series 4
Shell Size 23
Arrangement
Note: Contact arrangements
shown are of pin mating face
(plug or receptacle). Socket
mating face is mirror image.
.307
[9.4]
.407
.255
[10.34] [6.48]
.343
[8.71]
.000
.172
[4.37]
Plug (Accepts Type XII Female and Multimate socket contacts)
Replacement Coupling Ring
Shell Size
23
CPC
Series 4
Contacts—Pages 17-21 and 34–35
Contact Arrangements—Below
Accessories—Pages 38-42
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Panel Cutout
1.635
[41.53]
Max.
.000
23-9M
23-13M
23-16M
23-22M
No. of Cavities
Power
Multimate
6 (POWERBAND)
3
5 (Type XII)
8
4 (Type XII)
12
2 (Type XII)
20
Square Flange
Receptacle
Free-Hanging
Receptacle
Plug
1776247-21
—
211825-2
207486-2
206613-3
206136-4
211824-1
207485-1
206612-1
211825-1
207486-1
206613-1
1Four
4-40 threaded inserts per receptacle.
Note: Maximum wire insulation diameter is .150 [3.81] for Multimate contacts; .220 [5.59] for Power contacts.
.255
[6.48]
.307
.407
[9.4] [10.34]
.407 [10.34]
.360 [9.14]
.254 [6.45]
.000
.254 [6.45]
.360 [9.14]
.407 [10.34]
Arrangement 23-13M
Max. Wire Ins. Dia. =
.150 [3.81] for Multimate Contacts,
.220 [5.59] for Power Contacts
.276 .092 .092 .276
[7.01] [2.34] [2.34] [7.01]
.364 .182
.182 .364
[9.25] [4.62] .000 [4.62] [9.25]
.400 .184
.184 .400
[10.16] [4.67] .000 [4.67] [10.16]
.455 .273 .091 .091 .273 .455
[11.56] [6.93] [2.31] [2.31][6.93] [11.56]
.400 [10.16]
.316 [8.03]
.382 [9.7]
.316 [8.03]
.158 [4.01]
.158 [4.01]
.000
.000
.158 [4.01]
.158 [4.01]
.316 [8.03]
.316 [8.03]
.400 [10.16]
.382 [9.7]
Arrangement 23-16M
Max. Wire Ins. Dia. =
.150 [3.81] for Multimate Contacts,
.220 [5.59] for Power Contacts
Arrangement 23-22M
Max. Wire Ins. Dia. =
.150 [3.81] for Multimate Contacts,
.220 [5.59] for Power Contacts
37
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
CPC Connector Accessories
Cable Clamps
Standard Size
Cable clamps provide strain
relief and can be used on
all series receptacles and
plugs.
Clamping
Insert
Clamping
Insert
Plug
(See Note 3)
A ±.025
[±0.64] Dia.
Material
Black thermoplastic heat-stabilized,
fire-resistant, self-extinguishing, UL
94V-0 rated
Cable
Clamp
B ±.030
[±0.76]
11
13
17
23
Cable
O.D.
(Max.)
Dimensions
A
B
Shell
Size
.825
20.96
.950
24.13
1.125
28.58
1.600
40.64
1.250
31.75
1.400
35.56
1.400
35.56
1.555
39.5
.329
8.36
.453
11.51
.453
11.51
.703
17.86
Thread
Size
5/8-24 UNEF-2B
3/4-20 UNEF-2B
15/16-20 UNEF-2B
1-3/8-18 UNEF-2B
Part No.
Individually
Bulk
Packaged
Packaged*
1-206062-7**
1-206062-4
(400)
206966-9**
206966-7
(200)
1-206070-0**
206070-8
(200)
1-206138-0**
206138-8
(100)
CPC Connector Accessories
**Numbers in parentheses specify, in multiples, the minimum quantity of parts that can be ordered.
**Packaging includes two screws: shell sizes 11-17, screw length .500 [12.7]; shell size 23, screw length .625 [15.88].
Notes: 1. Clamping areas adjustable by inverting or changing clamping inserts. The quantity of inserts supplied with
each assembly is as follows: for size 11 cable clamps, one insert; for all other cable clamps, two inserts.
Notes: 2. Components for all cable clamps are packaged unassembled. This includes the cable clamp, two screws
and the clamping inserts.
Notes: 3. Cable clamps can be threaded directly onto plugs or receptacles, or onto back-shell extenders (page 40).
4. Replacement screws are available in the following sizes: 3/8 in. [9.52]—5019024-1, 1/2 in. [12.7]—
5019024-2, 5/8 in. [15.88]—5019024-3, 1 in. [25.4]—5019024-4, 3/4 in. [19.05]—5019024-5.
Notes: 5. Cable clamp inserts not sold separately.
The clamping area can be
adjusted by reversing the
clamping insert as shown
below.
Large Size
Clamping
Insert
Clamping
Insert
±.025
Plug
(See Note 3)
A [±0.64] Dia.
B
For additional information
concerning cable clamps, refer
to Instruction Sheet
408-7582.
Dimensions
A
B
Shell
Size
11
13
17
23
.850
21.59
1.131
28.73
1.131
28.73
1.600
40.64
Cable
Clamp
±.030
[±0.76]
1.450
36.83
1.655
42.04
1.655
42.04
1.655
42.04
Cable
O.D.
(Max.)
.453
11.51
.703
17.86
.703
17.86
1.125
28.58
Thread
Size
5/8-24 UNEF-2B
3/4-20 UNEF-2B
15/16-20 UNEF-2B
1-3/8-18 UNEF-2B
Part No.
Individually
Bulk
Packaged
Packaged*
206358-6**
206358-5
(200)
207008-6**
207008-5
(100)
1-206322-0**
206322-9
(100)
206512-6**
206512-5
(75)
**Numbers in parentheses specify, in multiples, the minimum quantity of parts that can be ordered.
**Packaging includes two screws: shell size 11, screw length .500 [12.7]; shell sizes 13-23, screw length .625 [15.88].
Notes: 1. Clamping areas adjustable by inverting or changing clamping inserts. The quantity of inserts supplied with
each assembly is as follows: for size 23 cable clamps, four inserts; for all other cable clamps, two inserts.
Notes: 2. Components for all cable clamps are packaged unassembled. This includes the cable clamp, two screws
and the clamping inserts.
Notes: 3. Cable clamps can be threaded directly onto plugs or receptacles, or onto back-shell extenders (page 40).
4. Replacement screws are available in the following sizes: 3/8 in. [9.52]—5019024-1, 1/2 in. [12.7]—
5019024-2, 5/8 in. [15.88]—5019024-3, 1 in. [25.4]—5019024-4, 3/4 in. [19.05]—5019024-5.
Notes: 5. Cable clamp inserts not sold separately.
38
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
CPC Connector Accessories (Continued)
Clamping
Insert
Self-Centering Cable Clamp
(for Shell Size 23)
The self-centering cable clamp is
used in applications where strain
relief protection is required and
the cable or wire bundle is large
and/or stiff.
1.600±.015 Dia.
[40.64±0.38] Dia.
Adjustable
Clamping Area
(See Note 1)
Intermediate
1.663±.030
[42.24±0.76]
Material
Black thermoplastic, UL 94V-0 rated
Part Numbers
207774-3 (individually packaged)
207774-4 (bulk packaged)
Cable
Clamp
Adjustable
Clamping Area
(See Note 1)
Clamping
Insert
Minimum
Adjustable
Clamping Area
(See Note 1)
Plug
(See Note 3)
Maximum
Clamping
Insert
Thread Size
1-3/8-18 UNEF-2B
Right-Angle Cable Clamps
Right-angle cable clamps are used
in tight areas where typical 180°
cable clamp strain reliefs will not fit.
Style A
Kit
CPC Connector Accessories
Notes: 1. Clamping area is adjustable by inverting clamping
inserts; maximum cable diameter is 1.125 [28.58].
2. Components for cable clamp are packaged
unassembled. This includes the cable clamp, two
screws (1.00 [25.4]) and the clamping inserts.
3. Cable clamp can be threaded directly onto plugs or
receptacles, or onto back-shell extenders (page 40).
Style B
Part Number 213982-1
(for Shell Size 13)
Kit w/Cover
Material
Body
Clamping Nut
Black thermoplastic, UL 94V-0 rated
Related Product Data
Technical Documents — page 80
1.025 Dia. Max.
[28.04]
A
1.400±.070
[35.56±1.78] (Assembled)
A
Shell Dim. Cable O.D. Coupling Ring
Size
A
Max.
Thread Size
.900
.329
11
5/8-24 UNEF-2B
[22.86]
[8.36]
.453
13 1.100
3/4-20 UNEF-2B
[27.94] [11.51]
.453
17 1.200
15/16-20 UNEF-2B
[30.48] [11.51]
.703
23 1.500
1-3/8-18 UNEF-2B
[38.10] [17.86]
Part Number
Kit
Kit w/Cover
796379-2
1546347-2
796380-2
1546348-2
796381-2
1546349-2
796382-2
1546350-2
39
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
CPC Connector Accessories (Continued)
Back-Shell Extender
(for Shell Size 23)
A back-shell extender is used with a
cable clamp in applications where
added length and/or additional wire
breakout are required.
1.620
[41.15]
Dia. Max.
1.200±.015
[30.48±0.38]
Material
1.450 Max.
[36.83] Max.
Black glass-filled thermoplastic
Part No. 207055-1
Cable
Clamp
Thread Size
1-3/8-18 UNEF-2A
Plug
(See Note)
Back-Shell
Extender
Thread Size
1-3/8-18 UNEF-2B
CPC Connector Accessories
Note: Back-shell extenders can be threaded directly onto plugs or receptacles and will accept cable clamps of the
appropriate size (pages 38 and 39).
Panel Mount Flanges
(for Plugs only)
D Dia.
A panel mount flange is used in
applications that require the plug
half of a connector to be panel
mounted.
A ±.010
[±0.25]
(2 Places)
B ±.015
[±0.38]
(2 Places)
C Dia. Max.
Material
Black thermoplastic
.156
[3.96]
Ref.
Plug
Shell
Size
11
13
17
23
.280
[7.11]
Panel Mount
Flange
Dimensions
A
.844
21.44
.969
24.61
1.125
28.58
1.438
36.53
B
1.125
28.58
1.280
32.51
1.435
36.45
1.750
44.45
C
.750
19.05
.875
22.22
1.110
28.19
1.510
38.35
D
.125
3.18
.125
3.18
.150
3.81
.150
3.81
Part
No.
207299-1
207299-2
207299-3
207299-4
40
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
CPC Connector Accessories (Continued)
Flexible Cable Boot and
Internal Cable Grip
(for Shell Size 11)
Flexible cable boots, with internal
cable grip installed, provide strain
relief capabilities for jacketed cable
in applications where aesthetic
appearance is essential. They
can be threaded onto plugs or
receptacles.
.265
[6.73] Dia.
.850
[21.59]
Dia.
2.750±.031
[69.85±0.79]
.265
[6.73] Dia.
1.795
[45.59]
.345
[8.76] Dia.
.390
[9.91]
.885
[22.48] Dia.
Flexible Cable Boot
Internal Cable Grip
Material
Black thermoplastic
Internal
Cable Grip
Plug
Cable Range
Jacketed
Cable
.150-.250 [3.81-6.35] Dia.
Flexible
Cable Boot
Part Numbers
207489-1 (Cable Boot)
207490-1 (Cable Grip)
.360
[9.14] Dia.
Flexible cable boots, with internal
cable grip installed, provide strain
relief capabilities for jacketed cable
in applications where aesthetic
appearance is essential. They
can be threaded onto plugs or
receptacles.
.050
[1.27]
2.750±.031
[69.85±0.79]
1.795±.010
[45.59±0.25]
CPC Connector Accessories
Flexible Cable Boot and
Internal Cable Grip
(for Shell Size 17)
A Dia.
1.090
[27.69]
Dia.
.400±.010
[10.16±0.25]
Dia.
1.090±.010 Dia.
[27.69±0.25]
.390
[9.91]
Flexible Cable Boot
Internal Cable Grip
Material
Black thermoplastic
Internal
Cable Grip
Part Numbers
Plug
207241-1 (Cable Boot)
207387-1 (Cable Grip)
A Dia. = .325 [8.26] for cable range
of .200-.250 [5.08-6.35]
207387-2 (Cable Grip)
A Dia. = .385 [9.78] for cable range
of .250-.350 [6.35-8.89]
Jacketed
Cable
Flexible
Cable Boot
41
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
CPC Connector Accessories (Continued)
Keying Plugs
Keying plugs are used to
provide keying capabilities
for all connector series.
Keying plugs are used in
socket cavities of standard
sex plugs and reverse sex
receptacles, except when
used with sealing caps.
1.000
[25.4]
Material
Nylon, natural, UL 94V-2 rated
Series 1 and Series 4 Keying Plug
(for Types III+ and Subminiature COAXICON Contacts)
Part No. 200821-1
.200±.010
[5.08±0.25]
.053±.001
[1.35±0.03]
Dia.
.116 Max.
[2.95] Dia.
Material
CPC Connector Accessories
Polyphenylene oxide, white,
UL 94V-1 rated
Series 2 Keying Plug
(for Size 20 DM and 20 DF Contacts)
Part No. 206509-1
1.733
[44.01] Max.
Material
(206508-1) Nylon, natural, UL 94V-2
rated
(207597-1) Thermoplastic, black,
UL 94V-0 rated
Series 3 and Series 4 Keying Plugs
(for Type XII Contacts)
Part Nos. 206508-1 (Socket Cavities)—Shown Above
207597-1 (Pin Cavities)
42
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
One-Piece Sealed Circular Plastic Connectors
Product Facts
■
■
■
■
■
■
■
Economical environmentally
sealed connector designed
for industrial applications
Meets major Industrial
Standards
High strength, impact
resistant thermoplastic
housing, rated UL 94V-0
Contains wire entry and
peripheral seals
AMP POWERBAND precision
formed power contact
(Series 5 and 6)
Type III+ precision formed
signal/low current contacts
(Series 1 and Series 6)
Other configurations in
Series 1 can be made
available, contact your local
Tyco Electronics Sales
Engineer or Tyco Electronics,
Harrisburg, PA
capability to provide this
product sealing to you in all
the shell sizes. If you don’t
see your particular size
configuration, contact your
local Tyco Electronics
Sales Engineer or call Tyco
Electronics for the latest
information.
Industry Standards
One-Piece Sealed CPC
products meet –
■
IP 67 (Temporary
immersion)
Fluid Protection Against –
diesel fuel, gear and
engine lubricants, gasoline,
anti-freeze, hydraulic fluid,
water, salt sprays, etc.
Performance Characteristics
meets the same
performance characteristics as shown on page 6.
One-Piece Sealed CPC Connectors
The new Sealed One-Piece
Circular Plastic Connectors
are the latest product
innovation to the sealed
CPC product family. This
design allows for easy
assembly. The housing and
the seal are attached. A
newly designed wire entry
seal protects the rear of the
connector and a peripheral
seal protects the connector
interface. Simply crimp the
contact onto a wire and
insert the crimped wire
contact through the seal
and into the housing cavity.
The connector loads the
same as if the seal wasn’t
there. All connector cavities
come in a sealed condition.
No plugs are required if
you do not use a position
cavity. We have the
Operating Temperature Range—
-50°C to +125°C [-58˚F to +257˚F]
UL Voltage Rating—
Series 1 600 V (AC or DC)
Series 6 250 V (AC or DC)
.125 POWERBAND Power Contact –
45 amps, single contact
rating at 30°C T-Rise
Type III+ Contacts –
13 amps, single contact
rating at 30°C T-Rise
Flammability Rating—
UL 94V-0 rated
Sealing Capability—
Per IP 67
Housing Material—
High strength, impact
resistant thermoplastic
Fluid Resistance—
Diesel fuel, gear and engine lubricants,
gasoline, anti-freeze, hydraulic fluid,
water
43
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
One-Piece Sealed Circular Plastic Connectors, Series 1
Sealed CPC Receptacles,
Special Series 1 with
Pre-Installed, Bonded
Peripheral Seal
Square Flange Receptacle (Uses Flange Seal Part No. 81665-■
■ on page 51)
1.705 Max.
[43.31]
.094±.010
[2.39±0.25]
1.125±.025
[28.58±0.64]
.420±.015
[10.67±0.38
.844±.010 Typ.
[21.44±0.25]
1.750±.025
[44.45±0.64]
.844±.010
[21.44±0.25]
.687±.010 Dia.
[17.45±0.25
.844±.010 Typ.
[21.44±0.25]
.844±.010
[21.44±0.25]
Recommended Panel Cutout
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.705 Max.
[43.31]
Free-Hanging Receptacle
.935 Dia. Max.
[23.75]
.420±.015
[10.67±0.38]
Material and Finish
.687±.010 Dia.
17.45±0.25
.817 Max.
[20.75]
Housing—Thermoplastic, UL 94V-0
rated, black
Seal—Elastomer, gray
.094±.010
[2.39±0.25]
Related Product Data
One-Piece Sealed CPC Connectors
Contacts—Pages 17-22
Contact Arrangement—Page 24
Component Dimensions—
Size 11-4 shown; request Customer
Drawings for other sizes
Accessories—Pages 38-42 and
51-54
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Plug
.975 Dia. Max.
[24.77]
1.425 Max.
[36.20]
Arrangement
Shell No. of
Size Positions
Sex
Standard
Reverse
13-9
Standard
17-14
Reverse
Standard
17-16
Standard
23-24
Standard
23-37
Standard
1
Four 4-40 threaded inserts per receptacle.
11-4
Square Flange Recptacle
With Mounting
With Threaded
Holes
Inserts1
796095-2
–
788154-2
–
788158-2
–
796272-1
–
796275-1
796275-3
796275-2
–
796190-1
–
796286-1
–
Free-Hanging
Receptacle
Plug
Insulation
Diameter
796096-2
788155-2
788159-2
796273-1
796276-1
796276-2
796291-1
796287-1
796094-2
788153-2
788157-2
796271-1
796274-1
796274-2
796188-1
796288-1
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.040-.080 [1.01-2.03]
.065-.120 [1.65-3.04]
.065-.100 [1.65-2.54]
Assembly Accessories
Seal Protectors are recommended to aid
contact insertion through the wire entry
seal. They are reusable.
Wire Entry Seal Plug
Part Number 208337-1 (Insert Pins)
Part Number 208338-1 (Insert Sockets)
Part Number 796075-1 (6 per carrier strip)
Material—Polypropylene, natural
.453
[11.5]
44
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
One-Piece Sealed Circular Plastic Connectors, Series 5
CPC Connectors, Series 5
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 51)
1.125±.010
[28.58±0.25]
1.050
[26.67]
Dia.
1.435
[36.45]
1.125±.010
[28.58±0.25]
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.105
[28.07] Dia. Max.
.094
[2.39]
.514
[13.06]
1.435
[36.45]
1.690
[42.93] Max.
1.690
[42.93] Max.
Plug
Material
Housing—Nylon, glass-filled UL rated
94V-0, black
1.349
Max.
[34.26]
Dia.
Related Product Data
Contacts—Page 47
Accessories—Page 51
Application Tooling—Pages 76-79
Technical Documents—Page 80
1.105
[28.07] Dia.
Arrangement
Square Flange
Receptacle
Free-Hanging
Receptacle
Plug
17-3
.095-.205 [2.41-5.21]
.150-.265 [3.81-6.73]
788189-1
788189-2
796112-1
796112-2
788188-1
788188-2
CPC Connectors, Series 6
Sealed
One-Piece Sealed Circular Plastic Connectors, Series 6
1.625 Max.
[41.28]
Free-Hanging Receptacle
.520
[13.21]
Square Flange Receptacle
1.625 Max.
[41.28]
.156
[3.96]
.520
[13.21]
1.728 Max.
[43.89]
1.438
[36.53]
.156
[3.96]
1.505 Max.
[38.23]
1.505 Max.
[38.23]
1.438
[36.53]
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.500 Max.
[38.10]
1.683 Max.
[42.75]
Plug
Material
Housing—Nylon, glass-filled UL rated
94V-0, black
1.750
[44.45] 1.438
[36.53]
1.783 Max.
[45.29]
Related Product Data
Contacts—Pages 17-23 and 47
Application Tooling—Pages 76-79
Technical Documents—Page 80
Arrangement
Shell No. of
Size Positions
23-16
Insulation Diameter
Power
Signal
.095-.205
[2.41-5.21]
.065-.100
[1.65-2.54]
Sex
Square Flange
Receptacle
w/Mounting Holes
Free-Hanging
Receptacle
Plug
Standard
Reverse
796466-1
—
796207-1
796330-1
796203-1
796332-1
45
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
One-Piece Sealed CPC Connectors
Insulation
Diameter
Shell
No. of
Size Positions
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors
Product Facts
■
■
■
■
■
■
■
Economical environmentally
sealed connector designed
for industrial applications
Meets major Industrial
Standards
High strength, impact
resistant thermoplastic
housing, rated UL 94V-0
Contains wire entry,
peripheral, and full
interfacial seals
AMP POWERBAND precision
formed power contact
(Series 5 and 6)
Type III+ precision formed
signal/low current contacts
(Series 6)
Other configurations in
Series 1 can be made
available, contact your local
Tyco Electronics Sales
Engineer or Tyco Electronics,
Harrisburg, PA
Technical Documents
Two-Piece Sealed CPC Connectors
Instruction Sheet
408-4317 Two-Piece Sealed CPC
Connectors
Product Specification
108-1579 Sealed CPC Connectors
with Removable Contacts
Sealed CPC connectors are
the latest additions to the
growing family of AMP
Circular Plastic Connectors.
Sealed CPC connectors
were developed as part of
the Series 5 and 6 product
line, specifically to meet the
increasing demand for an
economical environmentally
sealed connector.
(power/signal mix) sealed
connector configurations.
Other sizes are available in
a Series 1 (signal/low
current) configuration.
Contact your local Tyco
Electronics Sales Engineer,
or call Tyco Electronics for
the latest design
information.
Sealed CPC connectors
are designed to meet the
requirements of UL, CSA,
and VDE for
environmentally sealed
connectors used in
industrial applications.
Industry Standards
Two-Piece Sealed CPC
connectors meet—
■ IP65
In addition, sealed CPC
connectors are designed
to meet the latest SAE and
ASAE requirements as
outlined in the standards
listed here.
Performance Characteristics
Operating Temperature Range—
-50°C to +125°C [-58˚F to +257˚F]
UL Voltage Rating—
Series 5 600 V (AC or DC)
Series 6 250 V (AC or DC)
.125 POWERBAND Power Contact –
45 amps, single contact
rating at 30°C T-Rise
Type III+ Contacts –
13 amps, single contact
rating at 30°C T-Rise
Flammability Rating—
UL 94V-0 rated
Sealing Capability—
Per IP 65
Housing Material—
High strength, impact
resistant thermoplastic
Fluid Resistance—
Diesel fuel, gear and engine lubricants,
gasoline, anti-freeze, hydraulic fluid,
water
Sealed CPC connectors
incorporated the latest
technology in thermoplastic
design and use the new
AMP POWERBAND
precision formed high
current contact.
Illustrated above are the
Series 5 (power) and Series 6
46
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Sealed Circular Plastic Connectors
Multimate Size 16 Contacts
Precision formed signal/low current
Pin Diameter—.062 [1.57]
Test Current—13 amps max.
.125 POWERBAND Contacts
Precision formed high current
Pin Diameter—.125 [3.175]
Test Current—50 amps max.
Type III+
Precision Formed Contacts
Extraction Tool
Part Number 318813-1
Type II
Screw-Machined Contacts
See pages 17-23 for complete product information and part numbers of Size 16
contacts applicable in Sealed CPC Connectors.
(Instruction Sheet 408-4374)
.125
[3.18]
Dia.
.206
Dia.
[5.23]
Material and Finish
Serrations
Contacts—Copper with beryllium
copper spring
Plating Code
A — Post plated .000200 [0.00508]
min. silver in mating area with .000050
[0.00127] min. silver on remainder of
contact, all over .000050 [0.00127] min.
nickel
B — Post plated .000030 [0.00076]
min. gold in mating area with gold flash
on remainder of contact, all over
.000050 [0.00127] min. nickel
Contact
Strip
Extended1
.485
[12.32]
.206
[5.23]
Dia.
Standard
.400
[10.16]
Sealed CPC Connectors
Related Product Data
Application Tooling—Pages 76-79
Technical Documents—Page 80
.125 POWERBAND
Pin Contact
.125 POWERBAND
Socket Contact
Contact Part No.
Wire Size
AWG /mm2
14-12
2-3
10-8
5-8
Contact
Finish
A
B
A
B
A
B
A
B
Pin
Length
Standard
Standard
Extended1
Extended1
Standard
Standard
Extended1
Extended1
Strip
Loose Piece
Pin
Socket
Pin
Socket
213845-1
213845-2
213845-5
213845-6
213841-1
213841-2
213841-5
213841-6
213847-1
213847-2
—
—
213843-1
213843-2
—
—
213845-3
213845-4
213845-7
213845-8
213841-3
213841-4
213841-7
213841-8
213847-3
213847-4
—
—
213843-3
213843-4
—
—
Tooling Part No.
Heavy Duty Miniature (HDM)
Die Sets for
Applicators (for AMP-O-LECTRIC Hand Tool 69710-1
Model G Machine,
or 626 Pneumatic Tool
Base Part No. 354500)
System*
680195-3
356612-1
680197-3
356611-2 (10 AWG)
356611-1 (8 AWG)
1
For use in One-Piece or Two-Piece Sealed Circular Plastic Connectors (CPC), Series 5 and 6.
‡Single contact, free-air test current; not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information, page 8.
Note: Standard Size 8, High Current Upgrade Size 8, and .125 POWERBAND contacts are not intermateable.
*A typical 626 Pneumatic Tool System requires: a power unit (Part No. 189721-2, hand actuated or 189722-2, foot actuated), an adapter
holder (Part No. 356304-1, with ratchet), and “C” Head adapter Part No. 318161-1.
Specifically designed for
AMP CPC Connectors,
Series 5 and 6, the new
.125 POWERBAND contact
offers the performance of a
MIL-Spec screw machined
Size 8 contact with the
economy of a stamped
and formed, strip-feed
contact. Strip-feed contacts
offer maximum production
capabilities using standard
AMP bench-mount, semiautomatic termination
equipment. For low volume,
prototype or maintenance
and repair requirements,
the .125 POWERBAND
contact is available in loose
piece form.
47
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Series 5
CPC Connectors, Series 5
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 51)
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
.420
[10.67]
.280±.010
[7.11±0.25]
1.050
[26.67]
Dia.
1.090±0.15
[27.69±0.38]
Dia.
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
Listed part numbers are for
connectors only; contacts must
be ordered separately.
.094
[2.39]
1.675±.013
[42.54±0.33]
Typ.
.065±.003
[1.65±0.08]
Typ.
Free-Hanging Receptacle
1.146±.010
[29.11±0.25]
Material
.420
[10.67]
Housing—Nylon, glass-filled UL rated
94V-0, black
Related Product Data
Two-Piece Sealed CPC Connectors
Contacts—Pages 47
Accessories—Page 51
Application Tooling—Pages 76-79
Technical Documents—Page 80
.280±.010
[7.11±0.25]
1.090±.015
[27.69±0.38]
Dia.
1.050
[26.67]
Dia.
1.295±.010
[32.89±0.25]
Dia.
.094
[2.39]
1.675±.013
[42.54±0.33]
Typ.
.065±.003
[1.65±0.08]
Typ.
Plug (With Full Interfacial Seal)
Replacement Coupling Ring
Shell Size
17-3
1.349
Max.
[34.26]
Dia.
Part No.
213810-1
.995
[25.27]
.280±.010
[7.11±0.25]
1.609±.015
[40.87±0.38]
Reverse Sex (Receptacles accept socket contacts, Plugs accept pin contacts)
Square Flange
Receptacle
17-3 - Connector
213889-2
17-3 - Wire Entry Seal Kit
213899-1
Kit includes (1) Silicon Wire Entry Seal and (1) Pressure Plate.
*Wire entry seals require cable clamp kits.
Arrangement
Free-Hanging
Receptacle
213890-2
213899-1
Plug
213905-1
213899-1
Wire Entry Seals*
*Cable clamp kit 213902-3
required. (Similar to 206322-9.
See page 38 for dimensional detail
of cable clamp) or cable clamp kit
213904-3. (Similar to 206070-8.
See page 38 for dimensional detail
of cable clamp).
.880
[22.35]
Dia.
.325 When
[8.26] Flush
Rear View
Receptacles
Rear View
Plugs
Side View
Plugs/Receptacles
Note: Minimum insulation diameter is .156 [3.96]; Maximum insulation diameter is .260 [6.60].
48
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Series 6
CPC Connectors, Series 6
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 51)
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
.280
[7.11]
.420
[10.67]
1.435±.015
[36.45±0.38]
1.090
Dia.
[27.69]
1.125±.010
[28.58±0.25]
Typ.
Listed part numbers are for
connectors only; contacts must
be ordered separately.
.065
[1.65]
.094
[2.39]
1.675±.013
[42.55±0.33]
Free-Hanging Receptacle
1.146±.010
[29.11±0.25]
Housing—Nylon, glass-filled UL rated
94V-0, black
.094
[2.39]
.420
[10.67]
Material
1.295±.010
[32.89±0.25]
Dia.
1.090±.015
[27.69±0.38]
Dia.
Related Product Data
Contacts—Pages 17-21 and 47
Accessories—Page 51
Application Tooling—Pages 76-79
Technical Documents—Page 80
.065±.003
[1.65±0.08]
Typ.
.280±.010
[7.11±0.25]
1.675±.013
[42.55±0.33]
Plug
1.349 Max.
[34.26] Dia.
Two-Piece Sealed CPC Connectors
.995
[25.27]
.280±.010
[7.11±0.25]
Replacement Coupling Ring
Shell Size
17-10
Part No.
213810-1
1.609±.015
[40.87±0.38]
Reverse Sex (Receptacles accept socket contacts, Plugs accept pin contacts)
Arrangement
17-10 Connector
17-10 Wire Entry Seal Kit
Square Flange
Receptacle
213893-2
213900-1
Free-Hanging
Receptacle
213894-2
213900-1
Plug
213906-1
213900-1
Kit includes (1) Silicon Wire Entry Seal and (1) Pressure Plate.
*Wire entry seals require cable clamp kits.
Wire Entry Seal*
*Cable clamp kit 213902-3
required. (Similar to 206322-9.
See page 38 for dimensional detail
of cable clamp) or cable clamp kit
213904-3. (Similar to 206070-8.
See page 38 for dimensional detail
of cable clamp).
.880
Dia.
[22.35]
.325 When
[8.26] Flush
Rear View
Receptacles
Rear View
Plugs
Side View
Plugs/Receptacles
Note: Minimum insulation diameter is .156 [3.96]; maximum insulation diameter is .260 [6.60] for power contacts.
Minimum insulation diameter is .060 [1.50]; maximum insulation diameter is .130 [3.30] for signal contacts.
49
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Special Series 1
Sealed CPC Receptacles,
Special Series 1 with
Pre-Installed, Bonded
Peripheral Seal
Square Flange Receptacle (Uses Flange Seal Part No. 81665- ■ on page 51)
E
4 Plc.
B
A
Recommended Panel Cutout
Free-Hanging Receptacle
Listed part numbers are for
connectors only; contacts must
be ordered separately.
D
Material and Finish
Housing—Thermoplastic, UL 94V-0
rated, black
Seal—Elastomer, gray
C
Shell
Size
Related Product Data
11
Two-Piece Sealed CPC Connectors
Contacts—Pages 17-21
Contact Arrangement—Page 24
Accessories—Pages 38-42 and 51
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Arrangement
Shell No. of
Size Positions
11-4
13-7
13-9
17-16
17-14
23-24
23-37
13
17
23
Dimensions
A
B
1.125
28.58
1.281
32.54
.607
15.42
.812
20.62
1.435
36.45
1.050
26.67
1.750
44.45
1.438
36.53
Dimension
E
.844
21.44
.969
24.61
1.125
28.58
1.438
36.53
Sex
Series I Receptacles with Peripheral Seal
Dimensions
Square Flange Part No.
With Mounting
With Threaded
C
D
Holes
Free-Hanging
Part No.
Mates with
Plug Part No.
Inserts1
Std.
Rev.
Std.
Std.
Std.
Rev.
206061-2
206430-3
211401-3
206705-3
206036-4
206043-4
–
–
–
208131-2
–
–
.935
23.75
1.072
27.23
.817
20.75
.874
22.20
1.310
33.27
1.161
29.49
Std.
Std.
Rev.
206838-3
206151-3
206306-3
–
–
–
1.733
44.02
1.505
38.23
206153-2
206430-4
–
206705-4
206036-5
206043-5
206060-1
206429-1
211399-1
206708-1
206037-1
206044-1
206838-4
206151-4
206306-4
206837-1
206150-1
206305-1
Four 4-40 threaded inserts per receptacle.
1
Notes: 1. For detailed performance data on peripheral seals, refer to Product Specification No. 108-10024.
2. Receptacles mate with Series 1 plugs found on page 10.
Seal shown outside of
connector for illustration
purposes only.
Receptacles with pre-installed, bonded peripheral seals are recommended for use in
sealing/splash-proof applications, or where connectors will be subjected to vibration.
50
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Circular Plastic Connector Sealing Accessories
Wire Entry Seal Kits
for Plug and Receptacle
Housings
±.010
A [±0.254]
Dia.
Material and Finish
.075
[1.94]
Seal—Silicon, black
Pressure Plate—Nylon, black
.250±.010
[6.35±0.25]
Dia.
Seal
Dimension
A
.681
17.30
.790
20.07
Kit for
Pins
Kit for
Sockets
213926-1
213925-1
213899-1
213899-1
.790
20.07
213900-1
213900-1
.
213919-2
213919-1
213920-2
213920-1
.790
20.07
.790
20.07
Sealed CPC Connectors
Arrangement Insulation
No.
Dia. Range
.075-.125
13-9
1.91-3.18
.178-.265
17-3
4.52-6.73
.178-.265
4.52-6.73
17-10
.075-.125
1.91-3.18
.075-.125
17-14
1.91-3.16
.075-.125
17-16
1.91-3.16
Pressure
Plate
Notes: 1. Kits include one Gang Seal and one Pressure Plate marked for cavity
identification.
Notes: 2. Arrangement No. 17-10 Insulation Dia. Range .176-.265 [4.52-6.73] for
two holes, .075-125 [1.95-3.18] for eight holes.
One-Piece or Two-Piece Sealed CPC Sealing Accessories
1.500
[38.1]
1.125
[28.58]
Flange Seals
Shell Size
11
13
17 (shown)
23
Material Neoprene, black
Related Product Data
Part No.
81665-3
81665-4
81665-2
81665-5
1.500
[38.1]
1.125
[28.58]
Dimensions—Shell Size 17 shown;
request Customer Drawings for other
sizes
51
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341