OMRON E32DC200E

Fiber Sensors
Best Selection Catalog
OMRON's Fiber Sensors continue to support
an increasing range of applications.
This catalog brings you the latest information on our Fiber Units.
E32-series Fiber Units
Amplifier Units
E3X-DA-S/-MDA Series
E3X-NA Series
Standard Models
First, Our Standard Lineup
P6
These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces
and positioning.
A Wide Variety of Shapes for
Adapting to Different Installation
Locations
Choose the model that suits the installation space from a
wide variety of shapes and sizes (7 shapes, in standard
or small sizes).
Space Savings and Simple Mounting
Flat Models
Flat models that allow simple
screw mounting and
straightforward wiring have
been added to the lineup. Using
these models eliminates the
problem of fibers getting caught
on surrounding objects.
Flat model
Detect Workpieces in Tight Spaces
Custom-produced Sleeves
Screw-shaped
Cylindrical
Flat
Equipped with sleeve
Models with sleeves allow
detection in tight spaces. We
will perform the time-consuming
task of fashioning the sleeve,
with a length and bends to suit
the space (except for ultrafine
sleeves).
Models with sleeves
Flexible, Pliable Fiber
That Can Be Handled Like Wire
We have developed a broad range of fibers to meet a wide
variety of needs. Multicore (flexible) fiber is a new type of
standard fiber that can be used like wire without worrying
about the bending radius. We have also produced fiber that
will not break when used in moving parts and fiber that is
not degraded by contact with oil.
Conventional fiber
Flexible fiber
You will certainly appreciate the ease of use that flexible fiber ensures.
Length Can Be Specified in 1-m Units
Saving Energy and Work
We will produce fiber of the required length (in meter
units). For large-scale installations, specifications of up
to 20 m can be handled. (Specifications of 0.3 m and
0.5 m are also possible.)
Detection with Increased
Reliability
Special-beam Models
P10
A variety of heads incorporating the latest optical technology makes it possible to solve common problems
related to detection and to increase reliability.
Resistant to dust and dirt
Capable of detecting small
workpieces
■ Resistant to workpiece vibration
Use these models to handle
unstable detection conditions.
■
■
Environmentresistive Models
Small-spot models
E32-C42+
E39-F3A
Area-sensing models
E32-T16J
Limited-reflective
models
High-power models
E32-T17L
E32-L24L
High Resistance to External
Conditions with Fiber
P14
We have developed model variations for adapting to a variety of environmental conditions.
These models enable detection in high-temperature environments and vacuums.
High-temperature environments
Environments subject to the
splattering of chemicals
■ Vacuums
Use these models to handle
applications in special
environments.
■
■
Heat-resistant models
Applicationcorresponding Models
Chemical-resistant models
Fiber Units for the Food-packaging,
Semiconductor, and FPD Industries
P16
These models, which were developed for specific applications, offer top-quality detection performance.
Label detection
Liquid-level detection
■ Alignment and mapping of
glass substrates
■ Wafer mapping
Use these models for
specific applications.
■
■
Label-detection models
Alignment-check models
Liquid-level detection models
E32-G14
E32-L16
E32-D36T
Selection Guide
Fiber Units
We have developed
model variations for
handling a broad
range of applications.
Amplifier Units
Fiber Units
Detection
conditions
Environmental
conditions
Standard Models
Standard
detection
P.6
Environment-resistive Models
Positioning
Level
differences
Special-beam Models
Marks
Workpiece
presence
Positioning
Level
difference
P.10
■ Long-distance sensing, resistance to
dust and dirt
■ Small beam, resistance to rattling
■ Detection of transparent objects
High power
Small spot
Area sensing Retroreflective
sensing
Application-corresponding Models
Applicationcorresponding
P.14
■ Workpiece presence
■ Positioning
■ Level differences and marks
Workpiece
presence
Specialbeam
■ High-temperature environments (up to 400ºC)
■ Environments subject to scattering of chemicals and oil
■ Vacuum environments
Special environments
Standard environments
P.16
■ Labels
■ Liquid level
■ Alignment and mapping of glass substrates
■ Wafer mapping
Labels
Liquid level
Alignment
Mapping
Amplifier Units
Type
Digital
Manual
Appearance
Response
time
2-channel
models
100 µs, 1 ms, or 4 ms
48 µs, 1 ms, or 4 ms
(2-output models: 80 µs, 1 ms, or 4 ms)
Light source Red, green, blue, or infrared LED
Function
Models
4
200 µs
(high-speed models: 20 µs)
Red or green LED
Dual display (including digital, bar, percent, and hold display functions)
Threshold adjustment performed manually or by teaching
OFF-delay, ON-delay, one-shot timer (adjustable from 1 ms to 5 s)
LED bar display (5 levels)
8-turn sensitivity adjuster
OFF delay timer (fixed at 40 ms)
Advanced-function models are
available (2-output/input models).
Water-resistant models are available.
E3X-DA@-S
E3X-DA@TW-S (2-output model)
E3X-DA@RM-S (input model)
E3X-MDA@
E3X-NA@
E3X-NA@F (high-speed model)
E3X-NA@V (water-resistant model)
CONTENTS
■ Selection Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
■ Overview of Features, Applications, and Variations
Standard Models
Flexible (New Standard) . . . . . . . . . . . . . . . . . . P6
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
Break-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . P6
Fluorine Coating . . . . . . . . . . . . . . . . . . . . . . . . . . P7
Special-beam Models
Long Distance, High Power . . . . . . . . . . . . . . P10
Ultracompact, Ultrafine Sleeve . . . . . . . . . . . . . . P10
Coaxial, Small Spot . . . . . . . . . . . . . . . . . . . . . . . P11
Fine Beam (Narrow Vision Field) . . . . . . . . . . . . P12
Area Sensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . P12
Retroreflective . . . . . . . . . . . . . . . . . . . . . . . . . . . P13
Convergent-reflective . . . . . . . . . . . . . . . . . . . . . P13
Environment-resistive Models
Heat-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . P14
Chemical-resistant. . . . . . . . . . . . . . . . . . . . . . . . P14
Vacuum-resistant . . . . . . . . . . . . . . . . . . . . . . . . P15
Application-corresponding Models
Label Detection. . . . . . . . . . . . . . . . . . . . . . . . . P16
Liquid-level Detection . . . . . . . . . . . . . . . . . . . . . P16
Glass-substrate Alignment . . . . . . . . . . . . . . . . . P17
Glass-substrate Mapping . . . . . . . . . . . . . . . . . . P17
Water Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . P18
■ Ordering Information
Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P19
Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P25
Application-corresponding Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P30
■ Ratings/Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P34
■ Dimensions
Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P36
Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P42
Application-corresponding Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P47
■ Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P51
5
Features/Applications
Standard Models
R
Flexible (New Standard)
• Perform wiring without worrying about the bending radius.
• Choose the model to suit the installation space from
a variety of shapes.
Flexible fiber
Conventional fiber
■ Feature: Multicore (Flexible) Fibers
Cores
Cladding
A large number of ultrafine cores are all surrounded by
cladding. As a result, the fiber is flexible and can be bent
without significantly reducing the light intensity. This
helps solve problems, such as fiber being broken by getting caught on other objects.
■ Ratings/Characteristics
Fewer problems
Light intensity affected by bends in fiber
Fiber broken by getting caught on surrounding objects
Min. sensing
0.005-mm dia.
object
Min. bending
1 mm
radius
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
Fiber material Plastic
Standard
■ Feature: Flat Models
• Choose the model to suit the installation space
from a variety of shapes.
• New flat models allow space savings and simple
installation.
Flat models, which allow simple attachment and wiring,
have been added to the lineup. Choose the model to suit
the installation space from 3 sensing directions and 2
sizes, standard and small.
■ Ratings/Characteristics
Min. sensing
0.005-mm dia.
object
Min. bending
10 or 25 mm*
radius
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
Screw-shaped
Cylindrical
Flat
Equipped with sleeve
Fiber material Plastic
*Depends on the fiber diameter.
Break-resistant
• Bundle-fiber models can be used for moving parts.
• Capable of withstanding at least one million repeated bends (in typical applications).
B
■ Feature: Bundle Fibers
The Fiber Units contain a large number of independent
fine fibers, ensuring a high degree of flexibility.
■ Ratings/Characteristics
Min. sensing
0.005-mm dia.
object
Min. bending
4 mm (withstands repeated bending)
radius
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
Fiber material Plastic
6
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Standard Models
Fluorine Coating
U
• Fiber degradation due to oil is prevented using a fluo- ■ Feature: Fluorine Coating
roresin coating.
(Cross section)
• Free cutting is possible with cutter provided.
Fluororesin coating
Fluororesin is used as the sheath material to prevent fiber degradation resulting from oil adhesion.
Oil is blocked!
Note: The tip of the head is not chemical-resistant.
■ Ratings/Characteristics
Min. sensing
object
0.005-mm dia.
Min. bending
radius
4 mm
Ambient tem−40°C to 70°C (with no icing or condensation)
perature range
Fiber material Plastic
■Aplicable Models
Standard models
■ Fiber Length vs. Sensing Distance
Through-beam Fiber Units
Fiber Units with Reflective Sensors
(Fiber length of 2 m corresponds to (Fiber length of 2 m corresponds to
100%.)
100%.)
■Model Number Used for Ordering
Standard model number + Fiber length
Fiber length: 0.3 m, 0.5 m, or any length from
1 to 20 m (in 1-m units)
Sensing distance (%)
Fiber Length
This customization/delivery service applies to standard models. It is
aimed at reducing industrial waste and simplifying the installation
procedure.
Sensing distance (%)
(Fiber Length, Sleeve
Fiber Customization Service Length, and Bends)
100
80
60
100
80
60
40
40
20
20
0
2
5
10
15
20
0
2
5
10
Fiber length (m)
Sleeve Length and Bends
■Applicable Models
E32-TC200B/E32-TC200F
E32-DC200B/E32-DC200F
The E32-DC200B cannot be bent.
15
20
Fiber length (m)
■ Model Number Used When Changing Only the Sleeve Length
L
Model: E32- *1 C200 *2 -S *3
■ Model Number Used When Changing the Sleeve Length and Bends
Total length
L1
R
Total length
L2
R
Model Numbers Incorporating the Bending Radius, R, and Dimensions L1 and L2
Specifying L1 Only
(Units: mm) Specifying L2 Only
(Units: mm)
Bending
radius
R5
R7.5
R10
R12.5
L1 (±1)
Model number
10
E32- *1 C200 *2 -S *3 A1
15
E32- *1 C200 *2 -S *3 A2
12.5
E32- *1 C200 *2 -S *3 B1
17.5
E32- *1 C200 *2 -S *3 B2
15
E32- *1 C200 *2 -S *3 C1
20
E32- *1 C200 *2 -S *3 C2
17.5
E32- *1 C200 *2 -S *3 D1
22.5
E32- *1 C200 *2 -S *3 D2
Bending
radius
R5
R7.5
R10
R12.5
L2 (±1)
Model number
5
E32- *1 C200 *2 -S *3 A3
10
E32- *1 C200 *2 -S *3 A4
7.5
E32- *1 C200 *2 -S *3 B3
17.5
E32- *1 C200 *2 -S *3 B4
10
E32- *1 C200 *2 -S *3 C3
20
E32- *1 C200 *2 -S *3 C4
12.5
E32- *1 C200 *2 -S *3 D3
22.5
E32- *1 C200 *2 -S *3 D4
*1: Insert "T" for Through-beam Fiber Units and "D" for Fiber Units with Reflective Sensors.
*2: Insert the "B" or "F" that appears at the end of the original model number.
*3: Insert "50" if the total length is 50 mm. The total length must not exceed 120 mm.
7
Features/Applications
Standard Models
Sensing distance (mm)
(See note 1.)
Model
Overview of Model Variations
Through-beam Fiber Units
Type Flexible (New Standard)
(See note 2.)
R
Standard
Break-resistant
Fluorine coating
U
B
(Cross section)
Fluororesin coating
Shape of head
Screw-shaped
Flexible and pliable
M4
Withstands repeated
bending
530
760
Cable protected against
oil
680
680
(top-view)
E32-T11R
M3
E32-TC200
130
E32-T21R
(with sleeve)
M4
(1.2-dia.
sleeve)
M3
(0.9-dia.
sleeve)
Cylindrical
220
E32-TC200E
530
E32-TC200BR
E32-T11U
200
E32-T21
760
E32-TC200B
130
E32-TC200FR
3 dia.
E32-T11
220
E32-TC200F
530
760
680
(top-view)
E32-T12R
1.5 dia.
E32-T12
130
E32-T222R
3 dia.
E32-T12B
220
E32-T222
210
200
E32-T22B
460
(side-view)
E32-T14LR
1 dia.
E32-T14L
50
E32-T24R
Flat
15 × 8 × 3
130
E32-T24
530
760
680
(top-view)
E32-T15XR
12 × 7 × 2
E32-T15X
130
E32-T25XR
(side-view)
15 × 8 × 3
E32-T25X
E32-T15YR
130
E32-T25Y
210
E32-T15ZR
12 × 7 × 2
460
E32-T15Z
50
E32-T25ZR
E32-T25XB
460
50
15 × 8 × 3
150
E32-T15Y
E32-T25YR
(flat-view)
220
210
12 × 7 × 2
E32-T15XB
130
E32-T25Z
Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
2. These symbols are defined as follows.
: Bendable fiber,
R : Flexible fiber,
B
U : Fluorine-coated fiber.
8
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Standard Models
Sensing distance (mm)
(See note 1)
Model
Overview of Model Variations
Fiber Units with Reflective Sensors
Type Flexible (New Standard)
(See note 2.)
R
Standard
Break-resistant
Fluorine coating
U
B
(Cross section)
Fluororesin coating
Shape of head
Screw-shaped
Flexible and pliable
M6
Withstands repeated
bending
170
300
Cable protected against
oil
170
170
(top-view)
E32-D11R
M3
E32-DC200
30
E32-D21R
(with sleeve)
M6
(2.5-dia.
sleeve)
M3
(1.2-dia.
sleeve)
Cylindrical
80
E32-DC200E
170
E32-DC200BR
E32-D11U
30
E32-D21
300
E32-DC200B
30
E32-DC200FR
3 dia.
E32-D11
80
E32-DC200F
170
230
70
(top-view)
E32-D12R
3 dia.
(1.5 dia.)
E32-D12
30
E32-D22R
6 dia.
E32-D221B
80
E32-D22
45
30
E32-D22B
110
(side-view)
E32-D14LR
2 dia.
E32-D14L
15
E32-D24R
Flat
30
E32-D24
170
15 × 10 × 3
300
170
(top-view)
E32-D15XR
12 × 7 × 2
E32-D15X
30
E32-D25X
80
E32-D25X
40
15 × 10 × 3
E32-D15XB
50
E32-D25XB
100
(side-view)
E32-D15YR
12 × 8 × 2
E32-D15Y
8
E32-D25YR
20
E32-D25Y
40
15 × 10 × 3
100
(flat-view)
E32-D15ZR
12 × 8 × 2
E32-D15Z
8
E32-D25ZR
20
E32-D25Z
Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
2. These symbols are defined as follows.
: Bendable fiber,
R : Flexible fiber,
B
U : Fluorine-coated fiber.
9
Features/Applications
Special-beam Models
Long Distance, High Power
• Powerful beam reduces influence of dust and dirt.
• Long sensing distance enables use in large-scale
installations.
■ Applications
Detecting parts inside (trans- Detecting workpieces in
lucent) containers
coating processes
E32-T11L
E32-T17L
■ Ratings/Characteristics
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
E32-T14
Fiber material Plastic
■ Overview of Model Variations
Refle- Through-beam
ctive
Type
Features
Shape, sensing distance (mm)*
20,000
Equipped with large lens
3,400
Side-view, screw mounting
E32-T14
1,330
M4 screw
Model number
E32-T17L
E32-T11L
Equipped with large lens
700
E32-D16
M6 screw
400
E32-D11L
Ultracompact, Ultrafine Sleeve
• Ultracompact head can be installed in tight spaces.
• Ultrafine sleeve ensures reliable detection of small
objects, such as electronic components.
■ Applications
Alignment
inspections
Detection of terminals
E32-D33
1 dia.
E32-T33-S5
3 dia.
E32-T223R
0.22
dia.
3 dia.
0.5 dia.
E32-T334-S5
■ Ratings/Characteristics
Min. sensing 0.005-mm dia.
object
Ambient tem- −40°C to 70°C (no icing or condensation)
perature range
Material
Plastic
E32-D33
■ Overview of Model Variations
Refle- Through-beam
ctive
Type
Features
Shape, sensing distance (mm)*
130
E32-T223R
0.5-dia. sleeve (0.25-dia. opening)
44
E32-T33-S5
0.22-dia. sleeve (0.1-dia. opening)
5
E32-T334-S5
1-dia. cylinder
0.8-dia. sleeve
16
E32-D33
0.5-dia. sleeve
3
E32-D331
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
10
Model number
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Special-beam Models
Coaxial, Small Spot
• Small spot diameter (0.1 mm min. in diameter) enables ■ Applications
the reliable detection of small workpieces.
Detecting of CDs
• Use of red light ensures easy visual recognition and
simple positioning.
E32-C31+
E39-F3C
■ Ratings/Characteristics
Min. sensing
object
E32-C42+
E39-F3A
0.005-mm dia.
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
Fiber material Plastic
■ Overview of Model Variations
Coaxial, reflective
Type
Features
Shape, sensing distance (mm)*
Model number
Coaxial, M6 screw
300
E32-CC200
Coaxial, 3-dia. cylinder
150
E32-D32L
Small spot
0.1-dia. spot at a distance of 7 mm
E32-C41+
E39-F3A-5
Small variable spot
Spot diameter variable in the range
0.1 to 0.6 mm at distances in the
range 6 to 15 mm
E32-C42+
E39-F3A
Long distance, small spot
0.5-dia. spot at 17 mm
E32-C31+
E39-F3B
Long distance, parallel light
Spot diameter of 4 mm max. at
E32-C31+
distances in the range 0 to 20 mm E39-F3C
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
11 mm
6 mm
7 mm
17 mm
0.1 mm dia. spot
E32-C41+
E39-F3A-5
15 mm
Variable from
0.1 to 0.6 dia.
E32-C42+
E39-F3A
20 mm
4 mm dia.
0.5 mm dia.
E32-C31+
E39-F3B
E32-C31+
E39-F3C
11
Features/Applications
Special-beam Models
Fine Beam (Narrow Vision Field)
• Fine beam reduces unwanted light in surrounding area.
• Powerful beam allows use in applications requiring a
long sensing distance.
Approx.
60°
■ Applications
Alignment inspection
of orientation flats
Approx. 4°
E32-T22S
■ Ratings/Characteristics
Min. bending
radius
10 mm
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
1300 mm
E32-T24S
Fiber material Plastic
■ Overview of Model Variations
Through-beam
Type
Features
Shape, sensing distance (mm)*
Model number
Top view
1,900 E32-T22S
Side view
1,300 E32-T24S
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Area Sensing
• These Fiber Units ensure greater reliability with the de- ■ Applications
tection of position inconsistencies in passing workpieces and the presence of workpieces with holes.
Detecting passage of
• Wide sensing bands of 11 and 30 mm (through-beam
candies
models) enable the detection of large position inconsistencies.
11 mm
Detecting chips on film
E32-T16WR
E32-T16PR
■ Ratings/Characteristics
30 mm
Ambient tem- −40°C to 70°C (no icing or condensation)
perature range E32-T16W@ only: −25°C to 55°C
Fiber material Plastic
E32-T16WR
E32-D36P1
■ Overview of Model Variations
Reflective
Through-beam
Type
Features
Shape, sensing distance (mm)*
Model number
Sensing width: 11 mm
840
Sensing width: 11 mm
Flat-view
750 E32-T16JR
Sensing width: 30 mm
1,300 E32-T16WR
Beam width: 11 mm
E32-T16PR
150 E32-D36P1
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
12
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Special-beam Models
Retroreflective
• The return optical path ensures that more light is
interrupted by transparent workpieces than with
through-beam models.
• Equipped with MSR function to eliminate light reflected
directly from the workpiece.
■ Applications
Detecting
translucent
medicine
E32-R21
■ Ratings/Characteristics
Ambient
temperature
range
E32-R21: −40°C to 70°C
E32-R16: −25°C to 55°C
(with no icing or condensation)
Fiber material Plastic
E32-R16
■ Overview of Model Variations
Retroreflective
Type
Features
Shape, sensing distance (mm)*
MSR function, M6 screw
Model number
250 E32-R21
MSR function, screw mounting, long
distance
1,500 E32-R16
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Limited-reflective
• Limited-reflective models eliminate light reflected
from distant objects.
• Small level differences can be reliably detected.
• The optical-axis direction can be selected according
to the installation space.
■ Applications
Detecting connector
pins
Detecting wafers
(glass substrates)
E32-L25L
Non-detection range
Detection range
E32-L24L
■ Ratings/Characteristics
E32-L24L
Min. sensing
object
0.005-mm dia.
Fiber material
Plastic
200°C models only: Glass
■ Overview of Model Variations
Limited-reflective
Type
Features
Ultracompact, flat-view
Ideal for checking stocks of glass substrates
Heat-resistant up to 105°C,
top-view
Shape, sensing distance (mm)*
Model number
0 to 4 E32-L24S
5.4 to 9
E32-L25L
(center: 7.2)
Wide sensing range,
flat-view
0 to 15 E32-L16
Heat-resistant up to 200°C,
flat-view
4 to 10 E32-L86
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
13
Features/Applications
Environment-resistive Models
Heat-resistant
• These Fiber Units can be used for various applications in temperatures up to 400°C.
■ Applications
Detecting wafers in
high-temperature environments
E32-T61-S
■ Ratings/Characteristics
200°C and higher models
E32-T81R
All other models
E32-D81R
150°C models
Min. bending
radius
35 mm
10 mm
25 mm
Glass (fluoFiber material (fluororesin coating) roresin coating)
Plastic
E32-T84S-S
Glass (SUS spiral coating)
■ Overview of Model Variations
Reflective
Through-beam
Type
Ambient temperature range
Features
Shape, sensing distance (mm)*
−40°C to 150°C M4 screw
760
−40°C to 200°C L-shaped, long distance
Model number
E32-T51
1,300
E32-T84S-S
−60°C to 350°C M4 screw
450
E32-T61-S
−60°C to 350°C M6 screw
90
E32-D61-S
−40°C to 400°C M6 screw, with sleeve
60
E32-D73-S
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Chemical-resistant
• Built-in lens and high-power beam reduce the influence of dirt and drops of water.
• Round design prevents drops of water sticking to the
head (E32-T11F).
■ Applications
Detecting workpieces in cleaning processes
E32-T12F
■ Ratings/Characteristics
Ambient temperature range
E32-T14F
All other models
E32-T51F
E32-T81F-S
−40°C to 70°C
−40°C to 150°C
−40°C to 200°C
Plastic
Fiber material (fluororesin coating)
Glass (fluororesin
coating)
■ Overview of Model Variations
Reflective Through-beam
Type
Features
Shape, sensing distance (mm)*
Model number
Water-resistant round head
2,000
E32-T11F
Built-in lens, high power
3,000
E32-T12F
Heat-resistant up to 200°C
Built-in lens, high power
700
95
E32-T81F-S
E32-D12F
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
14
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Environment-resistive Models
Vacuum-resistant
• These models can be used in high-vacuum environ- ■ Applications (Configuration Example)
ments at pressures from 10-5 to 0.1 Pa.
Vacuum chamber
Atmospheric-pressure side
Vacuum side
Lens Unit
E39-F1V
• The 4-channel multi-flange, which has a maximum
leakage rate of 1×10-10 Pa·m3/s, contributes to space
savings.
Fiber Unit on vacuum side (set of 2)
Flange
E32-T51V
E32-VF4 (4 CH)
E32-T54V
E32-VF1 (1 CH)
E32-T84SV
Fiber Units on atmosphericpressure side (set of 2)
E32-T10V
Amplifier Unit
E3X-DA-S
E3X-NA
■ Ratings/Characteristics
120°C models
Min. bending radius
200°C
models
30 mm
Atmosphericpressure side
25 mm
Fiber mate- Glass (fluorores- Glass (SUS
in coating)
spiral coating)
rial
Plastic
■ Overview of Model Variations
Through-beam
Type
Features
Shape, sensing distance (mm)*
Model number
M4 screw, top-view, heat-resistant up
to 120°C, long distance
1,000
L-shaped, heat-resistant up to 120°C
130
E32-T54V
1M
L-shaped, long distance, heat-resistant up to 200°C
480
E32-T84SV
1M
E32-T51V+
E39-F1V
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Fiber Units on Atmospheric-pressure Side
Appearance
Type
Model number
Common
E32-T10V 2M
Type
Model number
4-channel flange
E32-VF4
1-channel flange
E32-VF1
Flanges
Appearance
■ Ratings/Characteristics
Item
Number of channels
Model
4 channels
1 channels
E32-VF4
E32-VF1
Leakage rate
1×10-10 Pa·m3/s max.
Ambient temperature
range
Operating: −25°C to 55°C
Storage: −25°C to 55°C
Material
Aluminum (A5056)
Flange-seal material
Fluorocarbon rubber (Viton)
Weight (packed state)
Approx. 280 g
Stainless steel (SUS304)
Aluminum (A5056)
Approx. 240 g
15
Features/Application
Application-corresponding Models
Label Detection
• Built-in lens and high-power beam enable the reliable detection of labels through a mounting board.
• These Fiber Units can be washed with hydrogen peroxide,
making them ideal for the food industry.
■ Applications
Detecting labels
■ Ratings/Characteristics
E32-G14
Ambient tem−40°C to 70°C (no icing or condensation)
perature range
Fiber material Plastic
10 mm
E32-G14
Degree of
protection
IP67
Type
Features
Through-beam
■ Overview of Model Variations
Shape, sensing distance (mm)*
Slot sensor, no adjustment of optical axis
required
Screw mounting, side-view
Model number
10
E32-G14
3,400
E32-T14
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Liquid-level Detection
■ Operating Principle
• Area sensing is possible with minimal influence from
bubbles and drops of water (E32-A01/A02/D36T).
Tube-mounting
• For safety when disconnections occur, two models
have been developed, a light ON model for liquid presTube
Liquid
Air
ence and a light ON model for liquid absence (E32-A01/
A02).
Tube-mounting model
Liquid-contact model
Liquid-contact model
Air
No liquid
present
E32-D36T
E32-D82F1
Liquid
present
Liquid
The presence/absence of liquid is detected using the
refractive properties of light. More specifically, it utilizes
the fact that the difference in refractive index between
the air and the tip/tube is larger than the difference between the liquid and the tip/tube.
■ Overview of Model Variations
Liquidcontact
Tube-mounting
Type
Features
Shape, sensing distance (mm)*
Model number
Light ON when liquid is present
(ideal for checking lower limits)
Applicable tube: Transparent tube with a
diameter of 3.2, 6.4, or 9.5 mm and a rec- E32-A01
ommended wall thickness of 1 mm
Light ON when liquid is absent
(ideal for checking for overflow)
Applicable tube: Transparent tube with a
diameter in the range 6 to 13 mm and a
recommended wall thickness of 1 mm
No restriction on tube diameter, resistant to bubbles and drops of water
Applicable tube: Transparent tube (no reE32-D36T
striction on diameter)
Heat-resistant up to 200°C, shape preLiquid-contact model
vents liquid buildup
E32-A02
E32-D82F1
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
16
ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì
Application-corresponding Models
Glass-substrate Alignment
• There is little variation of detection position within the ■ Engineering Data (E32-A07/A08/L16)
detection range (±0.1 mm max.)
Detection-Position Characteristic (Typical Examples)
• The different model variations can handle a variety of
Sensing object: Raw glass
E32-A07
(t = 0.7 mm, rounded edge)
sensing distances and temperature conditions.
25
Sensing distance, Y (mm)
X
Y
20
10
E32-A08
5
0
E32-L16
E32-L16
15
2.5
3.0
3.5
4.5
5.0
6.0
Detection position, X (mm)
■ Overview of Model Variations
Type
Features
Shape, sensing distance (mm)*
Limited-reflective
0 to 15 mm, wide-range sensing
0 to 15
E32-L16
10 to 20
E32-A08
15 to 25
E32-A07E1
E32-A07E2
5 to 18
E32-L66
Long-distance sensing
Heat-resistant up to 300°C
Model number
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Glass-substrate Mapping
200
Rounded
edge
150
Rate of change of digital
light-intensity value (%)
Digital light-intensity value
• These models can reliably detect thin glass-substrate ■ Engineering Data (E32-A09)
end faces (t = 0.5 mm, beveled edge).
Digital Light-intensity Value vs Sensing Distance
Angle Characteristics in Left and Right Directions
(Typical Examples)
(Typical Example)
• Using a large-diameter lens makes it possible to cope
300
100
250
with tilting of the glass substrates.
Beveled
edge
100
50
0
0
10
20
30
40
50
60
70
75
50
25
0
−10 −8
Sensing distance, X (mm)
Sensing object: Raw glass
(t = 0.5 mm, beveled/rounded edge)
X mm
−6
−4
−2
0
2
4
6
8
10
Angle, θ (o)
Sensing object: Raw glass
(t = 0.5 mm, rounded edge)
25 mm
+θ
−θ
Emission side
Reception side
E32-A09
Type
Features
Limited-reflective
■ Overview of Model Variations
Large-diameter lens ensures resistance to tilting
Shape, sensing distance (mm)*
E32-A09
15 to 38 (center: 25)
Heat-resistant up to 150°C
Heat-resistant up to 300°C
Model number
E32-A09H
20 to 30 (center: 25)
E32-A09H2
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
17
Features/Applications
Application-corresponding Models
Wafer Mapping
• Wafers are reliable detected with an ultrafine beam.
• The optical axis is adjusted before delivery to allow
easy installation.
E32-A03
■ Features
Optical axis adjusted
before delivery so
that displacement is
typically within 0.1°.
Direction of rotation
Vertical rotation
■ Engineering Data
Rate of change of digital light-intensity
value (%)
E32-A03-1
180
8-inch Wafer Mapping Characteristic (Typical Examples)
Wafer piles can
also be detected
160
140
120
100
80
170 mm
60
40
20
0
−10
For
2 wafers
X
Fiber
For
1 wafer
2-wafer pile
−9
−8
−7
−6
−5 −4 −3 −2 −1
Distance moved, X (mm)
Fiber
6.35 mm
0
1
2
3
Silicon wafer
(t = 0.75 mm)
4
■ Overview of Model Variations
Type
Features
Shape, sensing distance (mm)*
Through-beam
Opening angle: 1.5°
Model number
E32-A03
890
With mounting
flange
E32-A03-1
Opening angle: 3° ultraslim
E32-A04
340
With mounting
flange
E32-A04-1
*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Responding to the Increasing
Size of Installations
♦Impressive long-distance sensing capacity (up to 7 m)
♦MSR function for eliminating light not reflected from the reflector
♦Size-adjustable line and area beams
Glass detection through a view port
Long-distance and
E3C-LDA-series Photoelectric Sensors with Separate Digital Amplifiers (Laser Type)
High-precision Sensing and
Simple Installation
♦Parallel light kept at a constant diameter of 2 mm
for up to 1 m
♦Adjustment function for adjusting the optical axis
18
Wafer Ejection inspection
Ordering Information
Through-beam Fiber Units
High-resolution mode
Standard mode
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
(
Type
Appearance (mm) *2
Sensing distance (mm)
Standard object Min. bend(min. sensing ing radius
object) (mm) *1
(mm)
Features
Model number
M4 screw
E32-T11R
3-dia. cylinder
E32-T12R
Flat shape
E32-T15XR
M4 screw, with
sleeve
E32-TC200BR
E32-TC200B4R
3-dia. cylinder,
side-view
E32-T14LR
Flat shape,
side-view
E32-T15YR
Flat shape,
flat-view
E32-T15ZR
M3 screw
(small)
E32-T21R
2-dia. cylinder
(small)
E32-T22R
M4
3 dia.
530
350 (140)
Standard size
15 × 8 × 3
700
90 (40) ( ): E32-TC200B4R
1 dia.
(0.005 dia.)
M4
1.2 dia.
Min. bending radius
of sleeve: 5
3 dia.
Flexible (new standard)
Standard models
15 × 8 × 3
270
210
130 (50)
15 × 8 × 3
R
M3
R1
2 dia.
1.5 dia.
1.5-dia. cylinder
E32-T222R
(small)
160
130
75 (30)
Small size
12 × 7 × 2
0.5 dia.
(0.005 dia.)
90 (40) ( ): E32-TC200F4R
M3
0.9 dia.
Min. bending radius
of sleeve: 5
1 dia.
12 × 7 × 2
12 × 7 × 2
60
50
25 (10)
Flat shape
(small)
E32-T25XR
M3 screw
(small), with
sleeve
E32-TC200FR
E32-TC200F4R
1-dia. cylinder
(small),
side-view
E32-T24R
Flat shape
(small),
side-view
E32-T25YR
Flat shape
(small),
flat-view
E32-T25ZR
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
19
Through-beam Fiber Units
High-resolution mode
Standard mode
(
Type
Appearance (mm) *2
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm)
Standard object Min. bend(min. sensing ing radius
object) (mm) *1
(mm)
Features
Model number
M4 screw
E32-TC200
3-dia. cylinder
E32-T12
Flat shape
E32-T15X
M4
M4
1,000
760
500 (200)
Standard size
15 × 8 × 3
90 (40) ( ): E32-TC200B4R
1.2 dia.
Min. bending radius
of sleeve: 5
1 dia.
(0.005 dia.)
3 dia.
15 × 8 × 3
460
300 (120)
R25
3-dia. cylinder,
E32-T14L
side-view
600
15 × 8 × 3
Standard
Standard models
M4 screw, with E32-TC200B
sleeve
E32-TC200B4
M4
680
450 (180)
M3
Flat shape,
side-view
E32-T15Y
Flat shape,
flat-view
E32-T15Z
900
E32-TC200A
M3 screw
(small)
E32-TC200E
M3
2 dia.
Small size
1.5 dia.
270
220
125 (50)
12 × 7 × 2
0.5 dia.
(0.005 dia.)
90 (40) ( ): E32-TC200F4R
M3
0.9 dia.
Min. bending radius
of sleeve: 5
1 dia.
12 × 7 × 2
12 × 7 × 2
160
130
75 (30)
R10
2-dia. cylinder
(small)
E32-T22
1.5-dia. cylinder (small)
E32-T222
Flat shape
(small)
E32-T25X
M3 screw
(small),
with sleeve
E32-TC200F
E32-TC200F4
1-dia. cylinder
(small), sideview
E32-T24
Flat shape
(small), sideview
E32-T25Y
Flat shape
(small),
flat-view
E32-T25Z
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
20
Through-beam Fiber Units
Appearance (mm) *2
Break-resistant
Sensing distance (mm)
Features
Model number
M4 screw
E32-T11
3-dia. cylinder
E32-T12B
Flat shape
E32-T15XB
M3 screw
(small)
E32-T21
2-dia. cylinder
(small)
E32-T221B
1.5-dia. cylinder (small)
E32-T22B
Flat shape
(small)
E32-T25XB
M4 screw,
fluorine coating
E32-T11U
Large built-in
lens, M14
screw
E32-T17L
M4 screw
E32-TC200+
E39-F1
M4 screw,
flexible fiber
E32-T11R+
E39-F1
M4
680
450 (180)
3 dia.
900
1 dia
(0.005 dia.)
15 × 8 × 3
B
M3
Small size
Standard models
Standard size
Type
Min.
Standard object
bending
(min. sensing
radius
object) (mm) *1
(mm)
2 dia.
R4
240
200
110 (45)
0.5 dia
(0.005 dia.)
1.5 dia.
Coating
12 × 7 × 2
M4
M14
180
150
85 (35)
680
450 (180)
900
1 dia.
(0.005 dia.)
U
R4
20,000*3
20,000*3
10,000 (4,000)
10 dia.
R25
Long-distance, high-power
Special-beam models
4,000*4
4,000*4
2,600 (1,500)
M4
4,000*4
3,700
2,400 (970)
R
4 dia. (0.1 dia.)
4,000*4
3,600
2,300 (930)
R1
B
R4
4,000*4
3,400
2,250 (900)
R25
M4
1,700
1,330
870 (350)
M4 screw,
E32-T11+
break-resistant E39-F1
Screw mounting, side-view
E32-T14
M4 screw
E32-T11L
3-dia. cylinder
E32-T12L
1.4 dia.
(0.01 dia.)
3 dia.
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3. The optical fiber is 10 m long on each side, so the sensing distance is 20,000 mm.
*4. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.
21
Through-beam Fiber Units
High-resolution mode
Standard mode
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
(
Type
Appearance (mm) *2
Sensing distance (mm)
Long-distance, high-power
500 (180)
910
800
520
400
250 (100)
M4
660
430 (160)
M3
Standard object Min. bend(min. sensing ing radius
object) (mm)*1
(mm)
3 dia. (0.1 dia.)
M4 screw,
side-view
E32-T11L+
E39-F2
R
M4 screw,
side-view,
flexible fiber
E32-T11R+
E39-F2
M4 screw,
side-view,
break-resistant
E32-T11+
E39-F2
M3 screw
(small)
E32-T21L
B
R4
540
440
250 (100)
0.9 dia.
(0.005 dia.)
R10
0.5 dia.
(0.005 dia.)
R
2-dia. cylinder
E32-T22L
(small)
Ultracompact, thin-sleeve
1 dia.
3 dia. 0.5 dia.
Sleeve cannot be bent.
3 dia. 0.25 dia.
Sleeve cannot be bent.
3 dia. 0.22 dia.
Sleeve cannot be bent.
Fine-beam
Special-beam models
2 dia.
3 dia.
160
130
75 (30)
Model number
R25
R1
820
Features
1-dia. cylinder,
E32-T223R
flexible fiber
R1
53
44
25 (10)
0.5-dia.
sleeve; 0.25dia. opening
0.25 dia.
(0.005 dia.)
E32-T33-S5
0.25-dia.
sleeve, 0.125- E32-T333-S5
dia. opening
12
10
6 (4)
0.125 dia.
(0.005 dia.)
6
5
3 (2)
0.1 dia.
(0.005 dia.)
0.22-dia.
sleeve, 0.1dia. opening
1.7 dia.
(0.1 dia.)
3-dia. cylinder E32-T22S
2,500
1,900
1,250 (500)
R10
E32-T334-S5
R10
3.5 dia.
1,750
1,300
870 (350)
1,100
840
560 (220)
R
R1
11
Area-sensing
1,500
1,100
750 (300)
980
750
480 (190)
11
1,300
1,000
650 (260)
3.5-dia. cylinE32-T24S
der, side-view
2 dia. (0.1 dia.)
E32-T16PR
Area width:
11 mm
R10
E32-T16P
(0.2 dia.) *3
R
R1
R10
Area width:
11 mm; sideview
E32-T16JR
E32-T16J
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3. This is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (The sensing object is stationary.)
22
Through-beam Fiber Units
Appearance (mm) *2
Sensing distance (mm)
1,700
1,300
850 (340)
30
Area-sensing
Special-beam models
Type
610
350 (140)
750
1,000
760
500 (200)
M4
300
230
150 (60)
2 dia.
360
280
180 (70)
M4
Heat-resistant
(0.3 dia.) *3
M4
450
300 (120)
600
200°C*6
R1
R25
1.5 dia.
(0.1 dia.)
R35
1 dia.
(0.005 dia.)
R10
3 dia. (0.1 dia.)
R25
350°C*6
M4
450
300 (120)
600
Chemical-resistant
7.2 dia.
5 dia.
6 dia.
500
400
250 (100)
R4
Area width:
10 mm; long distance
E32-T16
Heat-resistant up
to 150°C; sideE32-T54
view
Heat-resistant up
E32-T81R-S
to 200°C
Heat-resistant up
to 200°C; sideview
Heat-resistant up
to 200°C, long
distance
Heat-resistant up
to 200°C; Lshaped; long distance
E32-T61-S+
E39-F2
E32-T61-S+
E39-F1
E32-T84S-S
Fluororesin cover,
E32-T11F
round head
4 dia. (0.1 dia.)
Fluororesin cover,
E32-T12F
long distance
3 dia. (0.1 dia.)
R40
1,800
4 dia. (0.1 dia.)
1,400
900 (350)
920
700
460 (190)
E32-T16W
Heat-resistant up
E32-T61-S
to 350°C
4,000*7
3,000
2,000 (800)
5 dia.
5 dia.
1 dia.
(0.005 dia.)
2,500
2,000
1,300 (520)
E32-T16WR
Area width:
30 mm
Heat-resistant up
E32-T51
to 150°C
1,750
1.7 dia.
1,300
(0.1 dia)
870 (350)
3 dia.
Model number
Multi-point detecE32-M21
tion (4-head)
2 dia. (0.1 dia)
4,000*7
4 dia. (0.1 dia.)
3,400
2,200 (900)
M4
Features
R10
3,700
(0.6 dia.) *4
2,800
1,850 (740)
M3
Environment-resistive models
R
2,300
1,800
1,150 (450)
10
150°C*5
Min.
Standard object
(min. sensing bending
radius
object) (mm)*1
(mm)
1 dia.
(0.005 dia.)
R10
Fluororesin cover,
E32-T14F
side-view
Fluororesin cover,
heat-resistant up E32-T51F
to 150°C *5
Fluororesin cover,
heat-resistant up E32-T81F-S
to 200°C *6
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3. This is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (The sensing object is stationary.)
*4. This is the value for which detection is possible within the sensing area, with the sensing distance set to give a digital value of 1,000. (The sensing object is stationary.)
*5. For continuous operation, use the products within a temperature range of−40°C to 130°C.
*6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
*7. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.
23
Through-beam Fiber Units
High-resolution mode
Standard mode
(
Type
Appearance (mm)
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm)
Min. bending
radius (mm)
1.2 dia. (0.01 dia.)
1,350
1,000
680 (260)
Vacuum-resistant
Environment-resistive models
260
200
130 (50)
Standard object
(min. sensing object) (mm) *
4 dia. (0.1 dia.)
R30
210
130
100 (35)
1.2 dia. (0.01 dia.)
500
330 (180)
480
320 (130)
660
630
4 dia. (0.1 dia.)
2 dia. (0.1 dia.)
R25
Features
Model number
M4 screw, heatresistant up to
120°C
M4 screw, heatresistant up to
120°C, long distance
L-shaped, heatresistant up to
120°C
L-shaped, heatresistant up to
120°C, long distance
L-shaped, heatresistant up to
200°C, long distance
E32-T51V 1M
E32-T51V 1M+
E39-F1V
E32-T54V 1M
E32-T54V 1M+
E39-F1V
E32-T84SV 1M
* The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to
optimum values.
Flanges
Lens Units
Appearance (mm)
Type
4-channel flange
Model number
Appearance (mm)
Type
E39-F1V
E32-VF4
Quantity
Remarks
2
Long-distance Lens Unit
Can be used for the E32T51V and the E32-T54V.
Quantity
Remarks
2
Can be used for the E32T54V.
Mounting Brackets
1-channel flange
E32-VF1
Fiber Units for Atmospheric-pressure Side
Appearance (mm)
Type
Amplifier-Flange
Connection Fiber
*
24
Indicates models that allow free cutting.
Appearance (mm)
Type
E39-L54V
Model number
E32-T10V 2M
Ordering Information
Fiber Units with Reflective Sensors
High-resolution mode
Standard mode
(
Type
Appearance (mm) *3
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm) *1
(Min. sensing Min. bending
object) (mm) *2 radius (mm)
Features
Model number
M6 screw
E32-D11R
3-dia. cylinder
E32-D12R
Flat shape
E32-D15XR
M6
300
170
120 (50)
15 × 10 × 3
M6 screw,
with sleeve
Sleeve cannot be bent. M6 2.5 dia.
6 dia.
80
45
30 (14)
15 × 10 × 3
Flexible (new standard)
Standard models
Standard size
3 dia.
70
40
26 (12)
15 × 10 × 3
(0.005 dia.)
M3
Small size
3 dia.
50
30
20 (8)
12 × 8 × 3
12 × 8 × 2
12 × 8 × 2
6-dia. cylinder,
side-view
E32-D14LR
Flat shape,
side-view
E32-D15YR
Flat shape,
flat-view
E32-D15ZR
M4 screw
(small)
E32-D211R
M3 screw
(small)
E32-D21R
3-dia. cylinder
(small)
E32-D22R
Flat panel
(small)
E32-D25XR
M3 screw
(small), with
sleeve
Min. bending
M3 1.2 dia.
radius of
sleeve: 5
2 dia.
R
R1
M4
26
15
10 (4)
14
8
5 (2)
E32-DC200BR
E32-DC200B4R
E32-DC200FR
E32-DC200F4R
2-dia. cylinder
(small),
side-view
E32-D24R
Flat shape
(small),
side-view
E32-D25YR
Flat shape
(small),
flat-view
E32-D25ZR
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
25
Fiber Units with Reflective Sensors
High-resolution mode
Standard mode
(
Type
Appearance (mm) *3
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm) *1
M6
3 dia.
400
230
160 (70)
200
110
80 (36)
170
100
65 (30)
Standard size
Standard
15 × 10 × 3
(0.005 dia.)
M4
M3
130
80
50 (22)
3 dia.
Small size
12 × 8 × 2
( ): E32-DC200F4
12 × 8 × 2
R10
90 (40)
M3 1.2 dia.
2 dia.
12 × 8 × 2
Model number
M6 screw
E32-DC200
3-dia. cylinder
E32-D12
Flat shape
E32-D15X
M6 screw,
with sleeve
E32-DC200B
E32-DC200B4
6-dia. cylinder,
side-view
E32-D14L
Flat shape,
side-view
E32-D15Y
Flat shape,
flat-view
E32-D15Z
M4 screw
(small)
E32-D211
M3 screw
(small)
E32-DC200E
3-dia. cylinder
(small)
E32-D22
Flat shape
(small)
E32-D25X
M3 screw
(small),
with sleeve
E32-DC200F
E32-DC200F4
2-dia. cylinder
(small),
side-view
E32-D24
Flat shape
(small),
side-view
E32-D25Y
Flat shape
(small),
flat-view
E32-D25Z
M6 2.5 dia.
15 × 10 × 3
Min. bending radius of sleeve: 5
Features
500
R25
6 dia.
Standard models
300
200 (90)
90 (40)
( ): E32-DC200B4
Sleeve cannot
be bent.
500
300
200 (90)
15 × 10 × 3
Min.
(Min. sensing bending
object) (mm) *2 radius
(mm)
50
30
20 (8)
35
20
12 (6)
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
26
Fiber Units with Reflective Sensors
Appearance (mm) *3
M6
Sensing distance (mm) *1
M4
170
120 (50)
110
70
45 (20)
(0.005 dia.)
Small size
Coating
Long-distance, high-power
M6 screw
E32-D11
Flat shape
E32-D15XB
M4 screw
(small)
E32-D21B
M3
B
3-dia. cylinder
(small)
E32-D221B
M3 screw
(small)
E32-D21
R4
3 dia.
12 × 8 × 2
50
30
20 (8)
1.5-dia. cylinder
E32-D22B
(small)
M6
85
50
30 (15)
300
170
120 (50)
17.5
3 dia. 0.8 dia.
Sleeve cannot be bent.
U
Flat shape
(small)
E32-D25XB
M6 screw,
fluorine coating
E32-D11U
Large built-in
lens, screw
mounting
E32-D16
M6 screw
E32-D11L
M4 screw
E32-D21L
3-dia. cylinder
E32-D22L
0.8-dia. sleeve
E32-D33
0.5-dia. sleeve
E32-D331
R4
400
260 (110)
M6
M4
(0.005 dia.)
40 to 1,000
40 to 700
40 to 450 (40 to 240)
---
B
R4
650
R25
210
130
80 (35)
3 dia.
Ultracompact, thin-sleeve
Model number
300
1.5 dia.
Special-beam models
Features
15 × 10 × 3
Break-resistant
Standard models
Standard size
Type
Min.
(Min. sensing bending
object) (mm) *2 radius
(mm)
R10
(0.005 dia.)
25
16
10 (4)
R4
2 dia. 0.5 dia.
Sleeve cannot be bent.
5
3
2 (0.8)
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
27
Fiber Units with Reflective Sensors
High-resolution mode
Standard mode
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
(
Type
Appearance (mm) *3
Sensing distance (mm) *1
Min.
(Min. sensing bending
object) (mm) *2 radius
(mm)
250
150
100 (45)
M6
300
200 (90)
3 dia.
M3
R
R4
Coaxial, small-spot
Model number
E32-CC200R
M6 screw
500
E32-CC200
250
150
100 (45)
120
75
50 (22)
2 dia.
Special-beam models
Features
6 to 15 mm; spot diameter: 0.1 to
0.6 mm
Spot diameter of 0.5 to
1 mm at distances in the
range 6 to 15 mm
3-dia. cylinder
E32-D32L
M3 screw
(small)
E32-C31
2-dia. cylinder
(small)
E32-D32
Small spot
(variable)
(0.005 dia.)
R25
E32-C42+
E39-F3A
E32-D32+
E39-F3A
E32-C41+
E39-F3A-5
Spot diameter of 0.1 mm at 7 mm
Small spot
Spot diameter of 0.5 mm at
7 mm
E32-C31+
E39-F3A-5
Spot diameter of 0.2 mm at 17 mm
E32-C41+
E39-F3B
Long distance,
small spot
Spot diameter of 0.5 mm at
17 mm
Retroreflective
Area-sensing
4-dia. spot
M6
E39-R3
Reflector
E39-R3
Reflector
Long-distance
E32-C31+
sensing, parallel
E39-F3C
light
Spot diameter of 4 mm max. at distances in the range 0 to 20 mm
250
150
100 (45)
E32-C31+
E39-F3B
(0.005 dia.)
B
Beam width:
11 mm
E32-D36P1
E32-R21+
E39-R3
(Attached)
R4
10 to 250
10 to 250
10 to 250 (10 to 250)
150 to 1,500
150 to 1,500
150 to 1,500
(150 to 1,500)
(0.1 dia.)
R10
M6 screw
(0.2 dia.)
R25
E32-R16+
Screw mounting,
E39-R1
long distance
(Attached)
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
28
Fiber Units with Reflective Sensors
High-resolution mode
Standard mode
(
Type
Appearance (mm) *3
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm) *1
Min.
(Min. sensing bending
object) (mm) *2 radius
(mm)
R25
Ultracompact,
flat-view
E32-L24S
Heat resistant
up to 105°C *4,
top-view
E32-L24L
5.4 to 9 (center: 7.2)
5.4 to 9 (center: 7.2)
5.4 to 9 (5.4 to 9) (center: 7.2)
Heat resistant
up to 105°C *4,
top-view
E32-L25L
4 to 10
4 to 10
4 to 10 (4 to 10)
Heat resistant
up to 200°C, flat- E32-L86
view
(0.005 dia.)
R10
R25
Wide-range
sensing, flatview
E32-L16
R35
Heat resistant
up to 150°C
E32-D51
R10
Heat resistant
up to 200°C
E32-D81R-S
E32-D81R
Heat resistant
up to 350°C
E32-D61-S
E32-D61
Heat resistant
up to 400°C,
with sleeve
E32-D73-S
E32-D73
0 to 15
0 to 15
0 to 12 (0 to 12)
Heat-resistant
200°C*6
M6
350°C*6
400
230
160 (72)
150
90
60 (27)
(0.005 dia.)
M6
R25
400°C*6
Chemical-resistant
Environment-resistive models
M6
M4
1.25 dia.
Min. bending radius
of sleeve: 10
6 dia.
100
60
40 (18)
160
95
65 (30)
Fluororesin covE32-D12F
er, long distance
(0.005 dia.)
7 dia.
Small level differences, high
E32-L25
power, side-view
E32-L25A
2 to 6 (center: 4)
2 to 6 (center: 4)
2 to 6 (2 to 6) (center: 4)
150°C*5
Model number
Small level differences, topview
0 to 4
0 to 4
0 to 4 (0 to 4)
Convergent-reflective
Special-beam models
3.3
3.3
3.3 (3.3)
Features
70
40
30 (10)
R40
Fluororesin covE32-D14F
er, side-view
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
*4. For continuous operation, use the products within a temperature range of −40°C to 90°C.
*5. For continuous operation, use the products within a temperature range of −40°C to 130°C.
*6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
*7. Confirm applicable Amplifier Units before placing an order. (Refer to Precautions for Correct Use.)
29
Ordering Information
Application-corresponding Fiber Units
High-resolution mode
Standard mode
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
(
Label-detection
Type
Appearance (mm) *2
Sensing distance (mm)
10
10
10 (10)
Standard object Min. bend(min. sensing ing radius
object) (mm)*1
(mm)
4 dia. (0.1 dia.)
R25
4,500
3,400
2,250 (900)
Applicable tube: Transparent tube with a diameter
in the range 8 to 10 mm and a recommended wall
thickness of 1 mm
R10
Liquid-level detection
Applicable tube: Transparent tube with a diameter
of 3.2, 6.4, or 9.5 mm and a recommended wall
thickness of 1 mm
Glass-substrate-alignment
R4
Applicable tube: Transparent tube with a diameter
in the range 6 to 13 mm and a recommended wall
thickness of 1 mm
Liquid-contact models
Glass-substrate-mapping
Application-corresponding models
Applicable tube: Transparent tube (no restriction on
diameter)
R40
0 to 15
0 to 15
0 to 12 (0 to 12)
10 to 20
10 to 20
10 to 20 (-)
15 to 25
15 to 25
10 to 20 (-)
20 to 30 (center: 25)
20 to 30 (center: 25)
20 to 30 (center: 25)
(-)
Model number
Slot sensor (no adjustment of optical E32-G14
axis required)
Screw mounting,
side-view
E32-T14
Compact
E32-L25T
No restriction on
tube diameter, resistant to bubbles
and drops of water
E32-D36T
Light ON when fluid
is present, resistant
E32-A01
to bubbles and
drops of water
Light ON when fluid
is not present, resisE32-A02
tant to bubbles and
drops of water
Heat resistant up
to 200°C,
fluororesin cover
E32-D82F1
E32-D82F2
E32-L16
Soda glass
with reflection
factor of 7%
5 to 18
5 to 18
5 to 16 (-)
15 to 38 (center: 25)
15 to 38 (center: 25)
15 to 38 (center: 25)
(-)
Features
Edge of soda
glass with reflection factor
of 7% (t = 0.5
mm, rounded
edge)
R25
Variation of detection position within
E32-A08
the detection
range: 0.2 mm
E32-A07E1 *6
E32-A07E2 *6
R25
Heat resistant up
to 300°C *4, *5
E32-L66
R25
Resistant to tilting
E32-A09
R35
Heat resistant up
to 150°C *3
E32-A09H
R25
Heat resistant up
to 300°C *4, *5
E32-A09H2
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3.
*4.
*5.
*6.
30
For continuous operation, use the products within a temperature range of −40°C to 130°C.
The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
These values are based on the assumption that there are no repeated sudden changes in temperature.
The characteristics for sensing object incline are different between the Attachments with model numbers ending in "E1" and "E2."
Refer to page 52 for installation precautions.
Application-corresponding Fiber Units
Type
Appearance (mm) *2
Sensing distance (mm)
Standard object Min. bend(min. sensing ing radius
object) (mm)*1
(mm)
R
1,150
890
600 (250)
3 dia.
Wafer-mapping
Application-corresponding models
3 dia.
R1
2 dia. (0.1 dia.)
R10
2 dia.
460
340
225 (100)
Opening angle: 1.5°;
optical axis adjusted E32-A03
before delivery
Long distance;
opening angle: 4°
2 dia.
1.2 dia.
(0.1 dia.)
Model number
Opening angle: 1.5°;
with mounting
flange; optical axis E32-A03-1
adjusted before delivery
1,750
1,300
870 (350)
3.5 dia.
Features
E32-T24S
Ultraslim (t = 2 mm);
opening angle: 3°;
E32-A04
optical axis adjusted
before delivery
Ultraslim (t = 2 mm);
opening angle: 3°;
with mounting
E32-A04-1
flange; optical axis
adjusted before delivery
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
31
Accessories
Lens Units
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Sensing distance (mm)
Long-distance Lens Units
Side-view Units
Reflection Units
Through-beam Lens Units
Type
Appearance
Applicable
Fiber Units
Superhighspeed
mode
Standard object
(min. sensing
object) (mm) *1
Features
Model
number
4,000*2
3,200
2,100
840
E32-TC200
4,000*2
4,000*2
2,600
1,500
E32-T11R
4,000*2
3,700
2,400
970
E32-T11
4,000*2
3,600
2,300
E32-T11U
4,000*2
3,600
2,300
2,650
2,100
1,300
Long-distance
sensing; opening angle: 5° to
930 4 dia. (0.1 dia.)
E39-F1
40° (heat resistant up to
930
200°C)
520
4,000*2
3,400
2,200
900
E32-T11L
910
800
500
180
E32-TC200
840
700
450
160
E32-T11R
520
400
250
100
E32-T11
820
660
430
E32-T11U
820
660
430
E32-T81R-S
360
280
180
70
E32-T61-S
600
450
300
120
E32-T81R-S
E32-T61-S
E32-T11L
E32-TC200
E32-T11R
E32-T11
E32-T11U
E32-T81R-S
E32-T61-S
E32-D32
Small-spot Lens Units
Highspeed
mode
E32-T11L
E32-C42
Reflective Lens Units
HighStandard
resolution
mode
mode
---
Side-view,
space-saving
160 3 dia. (0.1 dia.)
(heat resistant
up to 200°C)
160
---
Long distance
reflection (heat
E39-F3
resistant up to
200°C)
Spot diameter variable in the range 0.1 to 0.6 mm at distances in the range 6 to 15 mm
Small spot
Spot diameter variable in the range 0.5 to 1 mm at distances (variable)
in the range 6 to 15 mm
E32-C41
0.1-dia. spot at a distance of 7 mm
E32-C31
0.5-dia. spot at a distance of 7 mm
E32-C41
0.2-dia. spot at a distance of 17 mm
E32-C31
0.5-dia. spot at a distance of 17 mm
E32-C31
E32-C41
Spot diameter of 4 mm max. at distances in the range 0 to
20 mm
E39-F2
Small spot
E39-F3A
E39-F3A-5
Long distance,
E39-F3B
small spot
Long-distance
sensing, paral- E39-F3C
lel light
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.
32
Accessories
Protective Spiral Tube
Appearance
Application
Fiber protection
Applicable Fiber Units
Tube length
Model number
M3-screw models
E32-D21@
E32-DC200E
E32-DC200F@
E32-C31
500 mm
E39-F32A5
1m
E39-F32A
M3-screw models
E32-T21@
(Except the E32-T21R.)
E32-TC200E
E32-TC200F@
500 mm
E39-F32B5
1m
E39-F32B
M4-screw models
E32-T11@
E32-TC200
E32-TC200B@
E32-T51
500 mm
E39-F32C5
1m
E39-F32C
M6-screw models
E32-D11@
E32-DC200
E32-DC200B
E32-CC200@
E32-D51
500 mm
E39-F32D5
1m
E39-F32D
Note: Before using a Protective Spiral Tube, remove the protective tube that protects the area between the head and the optical fiber provided with some models.
Other Accessories
Appearance
Application
Name
Applicable Fiber Units
Remarks
Model number
Used to cut the fiber.
Cutter
Fiber Units that allow free cutting
Provided with applicable Fiber Units.
E39-F4
Attachments for inserting thin fibers into
Amplifier Units
Thin-fiber Attachments
Fiber Units that allow free cutting
and have a 1.0-dia. sheath
• 2 per set
• Provided with applicable Fiber Units.
E39-F9
Fiber Units that allow free cutting
and have a 2.2-dia. sheath
---
E39-F10
Fiber Units that allow free cutting
E39-F13: Used for Fiber Units with a 2.2dia. sheath.
E39-F14: Used for Fiber Units with a 1.0dia. sheath.
E39-F15: Used for Fiber Units with a
sheath diameter between 1.0 and 2.2
mm.
E39-F13
E39-F14
E39-F15
---
E39-F11
Used to extend fibers.
Fiber Connectors
Easy-to-use, onetouch relay connectors
Used to bends in
sleeves.
Sleeve Bender
E32-TC200B(4)
E32-TC200F(4)
E32-DC200F(4)
33
Ratings/Characteristics
Fiber Units
Standard models
Type
Flexible
Item
E32-T1@R
E32-D1@R
E32-T2@R
E32-D2@R
Standard
Break-resistant
Fluorine-coating
Plastic (PVC coating)
Plastic
(fluororesin coating)
Coaxial, small-spot
Fine-beam
(narrow vision field)
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
Fiber material
Plastic (PVC coating) Plastic (polyethylene coating)
Degree of protection IEC standard: IP67
Special-beam models
Type
Item
Long-distance, high-power
All other models
E32-D16
Ultracompact,
ultrafine-sleeve
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
Plastic (polyethylene
Plastic (combination of PVC, polyethylene,
Fiber material
Plastic (PVC coating)
coating)
and polyolefin sheaths)
Degree of protection IEC standard: IP67
IEC standard: IP40
IEC standard: IP67
Area-sensing
Item
E32-D36P1
E32-T16
All other models
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
Plastic (PVC coating)
Retroreflective
E32-T16W(R)
−25°C to 55°C
E32-R21
E32-R16
−40°C to 70°C
−25°C to 55°C
Plastic (polyethylene
Plastic (PVC coating) Plastic (polyethylene coating)
coating)
Degree of protection IEC standard: IP50 (IP67 for E32-T16)
IEC standard: IP67
Convergent-reflective
Item
All other models
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
E32-L25L
E32-L24L
−40°C to 105°C *2
Plastic (polyethylene coating)
Degree of protection IEC standard: IP50 (IP40 for E32-L24S, E32-L16, and E32-L86)
*1. There must be no icing or condensation within the range specified for the ambient operating temperature.
*2. For continuous operation, use the products within a temperature range of −40°C to 90°C.
*3. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
34
IEC standard: IP66
Special-beam models
Type
Fiber material
IEC standard: IP50
Special-beam models
Type
Fiber material
Plastic (PVC coating)
E32-L86
−40°C to 200°C *3
Glass (SUS spiral coating)
Fiber Units
Environment-resistive models
Type
Heat-resistant
Item
E32-T5@
E32-D5@
Ambient operating
−40°C to 150°C *4
temperature range *1
Ambient humidity
35% to 85%
range *1
Plastic
Fiber material
(fluororesin coating)
E32-T8@R-S
E32-D8@R-S
E32-T6@-S
E32-D6@-S
E32-T84S-S
−40°C to 200°C *3
Glass
(fluororesin coating)
−60°C to 350°C *3
E32-D73-S
−40°C to 400°C *3
Glass (SUS spiral coating)
Degree of protection IEC standard: IP67
Environment-resistive models
Type
Item
Chemical-resistant
All other models
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
Fiber material
E32-T51F
Vacuum-resistant
E32-T81F-S
−40°C to 150°C *4
Plastic (fluororesin coating)
All other models
−40°C to 200°C *3
−25°C to 120°C
−25°C to 200°C
Glass
(fluororesin coating)
Glass
(fluororesin coating)
Glass
(SUS spiral coating)
Degree of protection IEC standard: IP67
--Application-corresponding models
Type
Liquid-level detection
Item
Label-detection
All other models
E32-A01
E32-A02
Ambient operating
−40°C to 70°C
temperature range *1
Ambient humidity
35% to 85%
range *1
Fiber material
Other
Wafer-mapping
E32-D82F
−40°C to 200°C *3
−40°C to 70°C
(Fluororesin coating)
Plastic
(polyethylene coating)
IEC standard: IP50
IEC standard: IP68
IEC standard: IP50
Repeat accuracy: 1 mm max.
Repeat accuracy:
0.5 mm max.
Plastic
(fluororesin coating)
Plastic (polyethylene coating)
Degree of protection IEC standard: IP67
Application-corresponding models
Type
Item
32-T84SV
Glass-substrate-alignment
All other models
E32-L66
Ambient operating
−40°C to 70°C
0°C to 300°C *3, *5
temperature range *1
Ambient humidity
35% to 85%
range *1
Glass
Plastic
Fiber material
(polyethylene coating) (SUS spiral coating)
Glass-substrate-mapping
E32-A09
−40°C to 70°C
E32-A09H
−40°C to 150°C *4
Plastic
Plastic
(polyethylene coating) (fluororesin coating)
E32-A09H2
−40°C to 300°C *3
Glass
(SUS spiral coating)
Degree of protection IEC standard: IP40
*1.
*2.
*3.
*4.
*5.
There must be no icing or condensation within the range specified for the ambient operating temperature.
For continuous operation, use the products within a temperature range of −40°C to 90°C.
The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
For continuous operation, use the products within a temperature range of −40°C to 130°C.
These values are based on the assumption that there are no repeated sudden changes in temperature.
35
Dimensions
(Unit: mm)
Through-beam Fiber Units Through-beam models consist of two parts: an emitter and a receiver.
Standard/Flexible Models
Indicates models that allow free cutting.
E32-TC200E
E32-TC200
E32-T11R
1 dia.
M2.6 × 0.45
3.2
Two hexagonal nuts
Two toothed washers
Sensing head: M4 × 0.7* Optical fiber: 2.2 dia.
3
2.4
7
14
Two hexagonal nuts
Two toothed washers
Sensing head: M3 × 0.5*
Optical fiber: 1 dia.
0.5 dia.
2.5
2,000
1.8
*Material: Brass/nickel plating
Fiber Attachment (E39-F9)
2,000
11
5.5
25
10
*Material: Brass/nickel plating
E32-T22
E32-T22R
E32-TC200A
E32-T21R
Two hexagonal nuts
Two toothed washers
Sensing head: M3 × 0.5*2 Optical fiber: 2.2 dia.
1 dia.*1
1.8
5.5
Heat-shrinkable tube
0.5 dia. 2 dia. Sensing head* 1.4 dia. Optical fiber: 1 dia.
3 dia.
17
2,000
9.5
13.5
12
22
*1. E32-T21R: 0.5 dia.
*2. Material: Brass/nickel plating
25
10
Fiber Attachment (E39-F9)
2,000
*Material: Stainless steel (SUS303)
E32-T222
E32-T222R
E32-T12
E32-T12R
2.4 dia. Sensing head: 3 dia.*
1 dia.
Optical fiber: 2.2 dia.
25
Sensing head*
0.5 dia.
10
Optical fiber: 1 dia.
11
3
(14)
1.5 dia.
2,000
Fiber Attachment (E39-F9)
*Material: Brass/nickel plating
10
2,000
*Material: Brass/nickel plating
E32-T25X
E32-T25XR
E32-T15X
E32-T15XR
Sensing head*
2,000
15
Optical fiber: Two, 2.2 dia.
Sensing surface 1 dia. 3
8 1.5
7 1
2.5
*Material: Aluminum
25
*Material: Aluminum
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk
screw M2 — 8 4 pcs) included
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk
screw M2 — 8 4 pcs) included
E32-TC200B (B4)
E32-TC200BR (B4R)
E32-TC200(F4)
E32-TC200FR(F4R)
Two hexagonal nuts
Two toothed washers
Sensing head: M4 × 0.7
(coarse thread) *2
Stainlesssteel tube
1 dia. 1.2 dia. max. (SUS304)
90
(40)*1
11
2.5
2,000
25
10
Fiber Attachment (E39-F9)
1.8
90
(40)*1
5.5
*1. ( ): E32-TC200B4
*2. Material: Brass/nickel plating
E32-T14L
E32-T14LR
Two hexagonal nuts
Two toothed washers
Sensing head: M3 × 0.5 *2
Optical fiber: 1 dia.
Stainless0.5 dia. 0.9 dia. steel tube
(SUS304)
max.
Optical fiber: 2.2 dia.
2.4
3.2
11
2,000
*1. ( ): E32-TC200F4
*2. Material: Brass/nickel plating
E32-T24
E32-T24R
Sensing head: 3 dia.* Heat-shrinkable
45°
tube
Fiber Attachment (E39-F9)
Stainless-steel
25
Heat-shrinkable tube
tube: 1 dia. Sensing head:
10
2 dia.* 1.4 dia.
Optical fiber: 1 dia.
45°
Optical fiber:
2.2 dia.
2.8
1.5
1
1.5
30
35
12
2,000
1
0.5
1.5
15
15
35
Sensing surface
36
2,000
Optical fiber: 1 dia.
Fiber Attachment (E39-F9)
5 4.5
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
3 dia.
Sensing head*
2.5
7.5 5
7
12
Sensing surface: 0.5
2
*Material: Stainless steel (SUS304)
12
2,000
*Material: Stainless steel (SUS304)
Through-beam Fiber Units
Standard/Flexible Models
E32-T15Y
E32-T15YR
4
E32-T25Y
E32-T25YR
Sensing head*
3
Sensing surface
1.5
Sensing surface
2,000
15
2,000
12
1
8
25
Optical fiber: 1 dia.
7
Optical fiber: Two, 2.2 dia.
7.5 5
2.5
15
Sensing surface
1.5 4
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
E32-T25Z
E32-T25ZR
2,000
Sensing head*
2
1
8
2.5
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
12 Sensing surface
2,000
Sensing head*
3
25
Optical fiber: 1 dia.
7
Optical fiber: 2.2. dia.
7.5 5
2.5
*Material: Aluminum
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
E32-T15Z
E32-T15ZR
Fiber Attachment (E39-F9)
5 4.5
2.5
*Material: Aluminum
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
3
3 Sensing head*
2
*Material: Aluminum
Fiber Attachment (E39-F9)
5 4.5
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
*Material: Aluminum
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
Break-resistant/Coated Models
E32-T11
E32-T11U
E32-T21
Sensing head: Two hexagonal nuts
M4 × 0.7*
Two toothed washers
Sixteen, 0.265 dia.
Protective tube
M2.6 × 0.45
3.2
2.4
3.3
15
1.8
2.5
(14)
7
Sensing head: Two hexagonal nuts
M3 × 0.5*
Two toothed washers
Four, 0.25 dia.
Protective tube Optical fiber: 1 dia.
Optical fiber: 2.2 dia.
2,000
15
Fiber Attachment (E39-F9)
2,000
*Material: Brass/nickel plating
11
5.5
25
10
*Material: Brass/nickel plating
E32-T221B
E32-T12B
Sixteen, 0.265 dia. 2.4 dia. Sensing head: 3 dia.*
Heat-shrinkable tube
Optical fiber:
1 dia.
Optical fiber: 2.2 dia.
25
Four, 0.25 dia. 2 dia. Sensing head* 1.4 dia.
3
11
(14)
17
2,000
12
Fiber Attachment (E39-F9)
2,000
22
*Material: Brass/nickel plating
10
*Material: Stainless steel (SUS303)
E32-T22B
25
Four, 0.25 dia.
Sensing head*
Optical fiber: 1 dia.
1.5 dia.
10
Fiber Attachment (E39-F9)
10
2,000
*Material: Brass/nickel plating
E32-T15XB
E32-T25XB
Sensing head*
Sensing surface:
15
Sixteen, 0.265 dia.
3
8 1.5
2,000
Optical fiber: 2.2 dia.
Sensing surface:
Four, 0.25 dia.
2
7 1
2.5
7.5 5
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
*Material: Aluminum
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
2,000
12
Sensing head*
2.5
5 4.5
Two, 2.2-dia. mounting holes with
two, 4.4-dia. countersinks on both sides
Optical fiber: 1 dia.
25
Fiber Attachment (E39-F9)
*Material: Aluminum
Note: 1. Set of two symmetrical parts.
2. Mounting screws (countersunk screw M2 × 8 4 pcs) included
37
Through-beam Fiber Units
Long-distance/High-power Models
E32-T17L
Sensing head: M14 × 1*
Indicates models that allow free cutting.
E32-T14
Two hexagonal nuts
Lens: 10 dia.
(PMMA)
8
7.6
Optical axis
R3.5
5
19
42
Optical fiber: 2.2 dia.
10±0.2
2.5
10,000
Two, 3.2 dia.
7
8
10.5
23
9.2
*Material: ABS
E32-T11L
Heat-resistant
ABS
Nitrile rubber
Lens (PMMA)
4.4 dia.
8.2
Optical fiber: 2.2. dia.
16
11.2
2,000
E32-T12L
1.4 dia. M2.6 × 0.45
Two hexagonal nuts
Two toothed washers
Sensing head: M4 × 0.7*
2.4 dia. Sensing head: 3 dia.*
1.4 dia.
3
3.2
3
11
(14)
11
(14)
7
Optical fiber: 2.2. dia.
Optical fiber: 2.2. dia.
2,000
*Material: Brass/nickel plating
2,000
*Material: Brass/nickel plating
E32-T21L
E32-T22L
Two hexagonal nuts
Two toothed washers
Sensing head: M3 × 0.5*
Optical fiber: 1 dia.
0.9 dia.
25
0.9 dia.
10
1.8 dia.
Sensing head: 2 dia.*
Heat-shrinkable
tube
Optical fiber: 1 dia.
(2)
(1.7)
2.5
11
5.5
17
22
Fiber Attachment (E39-F9)
1.8
2,000
25
10
Fiber Attachment (E39-F9)
12
2,000
*Material: Stainless steel
*Material: Brass/nickel plating
Ultracompact/Thin-sleeve Models
E32-T33-S5
E32-T223R
2,000
10
1 dia.
(0.5)
Optical fiber: 1 dia.
0.5 dia.
1,000
20
25
25
5
0.25 dia.
10
Optical fiber: 1 dia.
12
10
0.5 dia.
Sensing head*
3 dia.
Sensing head*
Fiber Attachment (E39-F9)
Heat-shrinkable tube
Fiber Attachment (E39-F9)
*Material: Stainless steel
E32-T333-S5
*Material: Stainless steel
E32-T334-S5
20
1,000
20
25
0.125 dia. 5
10
12
Optical fiber: 1 dia.
0.25 dia.
3 dia. Heat-shrinkable tube
Sensing head*
Note: The Fiber Attachment is attached with
adhesive and cannot be removed.
38
10
Fiber Attachment (E39-F9)
*Material: Stainless steel
1,000
25
0.1 dia. 5
10
12
Optical fiber: 1 dia.
0.22 dia.
3 dia. Heat-shrinkable tube
Sensing head*
10
Fiber Attachment (E39-F9)
Note: The Fiber Attachment is attached with
adhesive and cannot be removed.
*Material: Stainless steel
Through-beam Fiber Units
Fine-beam (narrow vision field) Models
E32-T22S
E32-T24S
Sensing head*
1.7 dia.
1.8
0.4
Optical fiber: 2.2 dia.
Sensing head*
3 dia.
15
2,000
11
17.6 3.5 dia.
Optical fiber: 2.2 dia.
3.2
*Material: Brass/nickel plating
E32-T16W
E32-T16WR
Mounting bracket (provided as accessory)
3.2
3
Area-sensing Models
10
5
20.5
23
18
Sensing
surface
(3 × 30)
2,000
2 dia.
12
18.5
Sensing surface
2
*Material: Brass/nickel plating
E32-M21
Optical axis
45
65
Sensing head:
M3 × 0.35 *2
69
Two hexagonal nuts
Two toothed washers
Silicon tube *1
*1. One set of silicon tubes is
black and the other set is gray.
Use this difference to
distinguish between the
emission and reception sides.
*2. Material: Stainless steel
(SUS303)
Sleeve
Four, 1-dia.
plastic fibers
13
Sensing head*
28
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
Optical fiber:
2.2 dia.
2,000
1.8
11
E32-T16P
E32-T16PR
2,000
23
*Material: ABS (sensing surface: PMMA)
E32-T16J
E32-T16JR
E32-T16
Receiver
Sensing surface (2 × 11)
Two, 3.2 dia.
Emitter
14.5
10.7
6-dia.
countersink
4
19
27
20
3.3
14.5
10.7
Optical
axis
2
Sensing
surface
(2 × 11)
15.5
8.85
4
8.4
3
Sensing head*1
Optical
axis
Sensing
surface
(2 × 11)
27
19
25
27
Lens* 20
Optical
axis
20
4
4
Sensing head*1
Two, 3.2-dia.
holes with 6-dia.
countersinks
Sensing
head*
Optical fiber:
2.2 dia.
2000
2,000
Sensing
surface
(2 × 10)
(PMMA)
6 dia.
2,000
Optical fiber: 2.2 dia.
*1. Material: Heat-resistant ABS
(sensing surface: PMMA)
*2. Provided with stickers with
slits of width 0.5 and 1 mm (2 of each).
Optical fiber: 2.2 dia.
*Material: ABS for the sensing head
and PMMA for the lens.
*1. Material: Heat-resistant ABS
(sensing surface: PMMA)
*2. Provided with stickers with slits
of width 0.5 and 1 mm (2 of each).
Heat-resistant Models
E32-T51
Two hexagonal nuts
Two toothed washers
Sensing head: M4 × 0.7* Optical fiber: 2.2 dia.
1.5 dia.
E32-T54
Sensing surface
1
2.5
Optical fiber: 2.2 dia.
Sensing head: 3 dia.*
2 dia.
45°
7
2.85 dia.
1
1.7
2.4
15
17
25
2,000
*Material: Brass/nickel plating
Note: The maximum allowable temperature is 150°C. The maximum allowable temperature for continuous operation is 130°C.
20
45
2,000
*Material: Stainless steel (SUS303)
Note: The maximum allowable temperature is 150°C. The maximum
allowable temperature for continuous operation is 130°C.
39
Through-beam Fiber Units
Heat-resistant Models
Indicates models that allow free cutting.
E32-T81R-S
Two hexagonal nuts
Two toothed washers
Sensing head:
M4 × 0.7 *1
M2.6 × 0.45
Protective tube
3.6 dia. 2 dia.
Fluororesin tube
7
20
2.2 dia.
*1. Material: Stainless steel (SUS303)
13 *2
4 dia.
2.4
3
Sleeve
5
(75)
0.7 dia.
4 dia.
Note: The maximum allowable temperatures for sections A and B are 200°C and 110°C, respectively. The section inserted into the Amplifier Unit
(indicated by *2), however, must stay within the
Amplifier Unit's operating temperature range.
25
10
2,000
B
A
E32-T61-S
E32-T84S-S
A
(14.2)
12
B
5
2,000
25
1 dia.
13 *2
R5
3 dia.
4 dia.
90°
30 max. 6
Flexible tube:
2.9 dia.
(stainless steel)
Sleeve
2.2 dia.
7
4 dia. *3
3
20
Antislip tread
2.4
Sensing head *1
3 dia.
Lens (2 dia.)
Note: The maximum allowable temperatures
for sections A and B are 200°C and
110°C, respectively. The section inserted
into the Amplifier Unit (indicated by *2),
however, must stay within the Amplifier
Unit's operating temperature range.
13 *2
5
10
2,000
25
B
A
*1. Material: Stainless steel (SUS303)
*3. The diameter is 6 mm if the fiber
length exceeds 10 m.
*1. Material: Stainless steel (SUS303)
3.5 dia.
12
4 dia.
Flexible tube: 2.8 dia. (stainless steel)
Two hexagonal nuts
Hexagonal caulking
Two toothed washers
4 dia. Sleeve 2.2 dia.
M2.6 × 0.45
Sensing head:
M4 × 0.7 *1
Note: The maximum allowable temperatures for sections A and B are 200°C
and 110°C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating
temperature range.
Chemical-resistant Models
E32-T11F
E32-T12F
Nut *1
Sensing head *1
Lens: 3 dia.
Optical fiber: 2.2 dia. *2
Lens: 4 dia. Sensing head: 5 dia.
Fluororesin
4 dia.
Optical fiber: 2.2 dia.
7.2 dia.
10
(10
19.8
R3.6
.7)
(35)
20
10
3
2,000
2,000
100
*1. Material: PFA
*2. Sheath material: Fluororesin
E32-T14F
E32-T51F
Sensing head: 5 dia.
Fluororesin
4 dia.
2,000
Optical fiber: 2.2 dia.
Lens: 3.7 dia.
4.5
Optical
axis
(21)
2,000
100
(20)
Fluororesin
100
Optical fiber: 2.2 dia.
Sensing head: 5 dia.
E32-T81F-S
6 dia.
3.7 dia.
PFA cover
(R6)
Protective tube
4 dia. Sleeve
13 *2
(70)
(0.8)
30
2,000
A
40
PFA tube
2 dia.
5
25
B
2.2 dia.
Note: The maximum allowable temperatures for sections A and B are 200°C and 110°C, respectively. The section inserted into the Amplifier Unit
(indicated by *2), however, must stay within the
Amplifier Unit's operating temperature range.
Through-beam Fiber Units
Vacuum-resistant Models
E32-T51V
E32-T54V
1.15 dia.
M4 × 0.7 *
1.15 dia. M2.6 × 0.45
Two nuts
Two spring
washers
4 dia.
Optical fiber: 3 dia.
4 dia.
M2.6 × 0.45
3
2.2 dia.
4.5
8
Connected to flange
(vacuum side)
26
3
20
(30)
18
4
12
(15)
1,000
3 dia. *
R9
4 5 dia. 4 dia.
3 dia.
4 dia.
2.2 dia.
1,000
(3)
*Material: Aluminum
26
Connected to flange (vacuum side)
*Material: Stainless steel (SUS304)
E32-T84SV
E39-F1V
Lens (2 dia.)
Sensing head: 3 dia.*
(14.2)
12
1,000
0.5-dia. hole
8.9
12
30 max. 6
4 dia.
3.5 dia.
R5
3 dia.
90°
Flexible tube (stainless steel):
2.9 dia.
4 dia.
4 dia.
6
2.2 dia.
M2.6 × 0.45
Effective depth: 3.8
Spot-facing depth: 0.9
26
Connected to flange (vacuum side)
*Material: Stainless steel (SUS304)
E32-VF4
Four, 10 dia.
49
36 dia.
24
8
E32-VF1
80
70 dia.
44 dia.
(96)
(63)
22
10
5
(23)
22
30
20 dia.
19
45°
80
6 (33.53)
Flange
V40 O-ring
Flange
90 dia.
Note 1. Perform mounting so that the V40 O-ring is on the atmosphericpressure side of the vacuum chamber wall.
2. Mounting-hole cutout dimensions: 38 dia. ±0.5 mm
One nut
M14 × 2
Two, connectors
One spring V15 O-ring
washer
Note 1. Perform mounting so that the V15 O-ring is on the atmospheric-pressure side of the vacuum chamber wall.
2. Mounting-hole cutout dimensions: 14.5 dia. ±0.2 mm
41
Dimensions
(Unit: mm)
Fiber Units with Reflective Sensors
Standard/Flexible Models
Indicates models that allow free cutting.
E32-D211
E32-D211R
E32-DC200
E32-D11R
Two, 1 dia.
Two hexagonal nuts
Two toothed washers
Sensing head*
M6 × 0.75
4 dia.
3
4.8
10
Optical fiber: Two, 2.2 dia.
3.2
2.4
17
Two Fiber Attachments (E39-F9)
Two hexagonal nuts
25
Two toothed washers
10
Sensing head: M4 × 0.7*
Optical fiber: Two, 1 dia.
Two, 0.5 dia.
3
2.4
15
7
2,000
2,000
*Material: Stainless steel (SUS303)
*Material: ADC
E32-DC200E
E32-D21R
Two, 0.5 dia.
Two Fiber Attachments (E39-F9)
Two hexagonal nuts
25
Two toothed washers
10
Sensing head: M3 × 0.5*
Optical fiber: Two, 1 dia.
2.5
1.8
5.5
2,000
11
*Material: Stainless steel (SUS304)
E32-D12
E32-D12R
E32-D22
E32-D22R
2,000
Two,
3 dia. 1 dia.
E32-D15X
E32-D15XR
15
135
Sensing head*
Heat-shrinkable tube
Two, 0.5 dia.
15
12
*Material: Aluminum
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
E32-DC200B(B4)
E32-DC200BR(B4R)
2.5
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75 Optical fiber: Two, 2.2 dia.
(fine thread) *2
Sensing surface:
Two, 0.5 dia.
Two, 2.2-dia. mounting
5 4.5
holes with two, 4.4-dia.
countersinks on both sides
*Material: Aluminum
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
Two Fiber Attachments (E39-F9)
Two hexagonal nuts
25
StainlessTwo toothed washers
10
Sensing head: M3 × 0.5 *2
Two, 0.5 dia. 1.2 dia. steel tube
max. (SUS304)
Optical fiber: Two, 1 dia.
2.5
2.4
90
(40)*1
17
2,000
*1. ( ): E32-DC200B4
*2. Material: Brass/nickel plating
E32-D14L
E32-D14LR
1.8
90
(40)*1
5.5
E32-D24
E32-D24R
Sensing head*
45°
Heat-shrinkable tube
Optical fiber: Two, 2.2 dia.
5.7
1.5
1
0.5
2
30
35
12
2,000
Light baffle
42
Two Fiber Attachments (E39-F9)
E32-DC200F(F4)
E32-DC200FR(F4R)
Stainless-steel tube
(SUS304)
2.5 dia. max.
Sensing surface
25
2
2.5
1
2,000
Optical fiber: Two, 1 dia.
Sensing head*
8 1.5
6 dia.
2,000
*Material: Brass/nickel plating
Optical fiber: Two, 2.2 dia.
7.5 5
Two, 2.2-dia. mounting
holes with two, 4.4-dia.
countersinks on both sides
5.2
10
15
E32-D25X
E32-D25XR
2,000
Sensing surface:
Two, 1 dia.
3
Two, 1 dia.
3
Optical fiber: Two, 2.2 dia.
*Material: Stainless steel (SUS304)
Sensing head*
10 2.5
Two Fiber Attachments (E39-F9)
25
Optical fiber:
10
Sensing
head:
3
dia.*
2.7 dia.
Two, 1 dia.
Light baffle
*Material: Stainless steel (SUS304)
2,000
11
*1. ( ): E32-DC200F4
*2. Material: Stainless steel (SUS304)
Two Fiber Attachments (E39-F9)
25
Stainless-steel tube: 2 dia.
Sensing head: 3 dia.*
Optical fiber:
10
Heat-shrinkable tube Two, 1 dia.
45°
1.5
15
15
35
Sensing surface
12
2,000
*Material: Stainless steel (SUS304)
Fiber Units with Reflective Sensors
Standard/Flexible Models
E32-D15Y
E32-D15YR
2.8
E32-D25Y
E32-D25YR
2.4
3
2.3
Sensing surface 15
Sensing head*
2,000
Sensing surface
12
2.5
Optical fiber: Two, 2.2 dia.
10
2.5
7.5 5
Two, 2.2-dia. mounting holes
with two, 4.4-dia. countersinks on both sides
15
2.5
2.2
1.4
Optical fiber: Two, 2.2 dia.
1.2 0.9
2
4
*Material: Aluminum
5 4.5
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
2,000
Optical fiber: Two, 1 dia.
12
Sensing head*
Sensing surface
2,000
2.5
7.5 5
Two, 2.2-dia. mounting holes
with two, 4.4-dia. countersinks on both sides
Two Fiber Attachments (E39-F9)
2.5
*Material: Aluminum
5 4.5
*Material: Aluminum
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
Two, 2.2-dia. mounting holes
with two, 4.4-dia. countersinks
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
25
3
8
10
25
Two Fiber Attachments (E39-F9)
E32-D25Z
E32-D25ZR
Sensing head*
2,000
Optical fiber: Two, 1 dia.
8
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
Sensing surface
Sensing head*
Two, 2.2-dia. mounting
holes with two, 4.4-dia.
countersinks
1.5
*Material: Aluminum
E32-D15Z
E32-D15ZR
3
1.4
2
Break-resistant/Coated Models
E32-D11
E32-D11U
Two, sixteen,
Two hexagonal nuts
0.265 dia. Sensing head: Two toothed washers
Protective tube
M6 × 0.75*
2.4
5.2
10
Optical fiber: Two, 2.2 dia.
15
17
2,000
*Material: Brass/nickel plating
E32-D21B
E32-D21
Two Fiber Attachments (E39-F9)
Two hexagonal nuts
25
Two toothed washers
10
Sensing head: M4 × 0.7*
Optical fiber: Two, 1 dia.
Two, four, 0.25 dia.
3.2
3
2.4
2,000
Material: Stainless steel (SUS303)
E32-D221B
15
11
5.5
2,000
*Material: Brass/nickel plating
E32-D22B
Two Fiber Attachments (E39-F9)
25
Sensing head:
10
2.7 dia. 3 dia.*
Optical fiber: Two, 1 dia.
Two, four,
0.25 dia.
1.8
2.5
15
7
Two Fiber Attachments (E39-F9)
25
10
Optical fiber:
Two, 1 dia.
Two hexagonal nuts
Sensing head: Two toothed washers
Four, 0.25 dia. M3 × 0.5*
Protective tube
Attachment
25
Four, 0.25 dia.
Optical fiber:
Brancher (ABS): 3 dia.
1 dia.
Sensing
head *1
1.5 dia.
15
15
3
15
2,000
2,000
100
*1. Material: Stainless steel (SUS304)
Note: The Attachment is attached with adhesive
and cannot be removed.
*Material: Brass/nickel plating
E32-D15XB
10
E32-D25XB
Sensing head*
15
Sensing surface:
Two, sixteen, 0.265 dia.
3
10 2.5
2,000
12
Optical fiber: Two, 2.2 dia.
2,000
Optical fiber: Two, 1 dia.
25
2
8 1.5
2.5
7.5 5
Two, 2.2-dia. mounting holes
with two, 4.4-dia. countersinks on both sides
Sensing head*
*Material: Aluminum
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
Two Fiber Attachments (E39-F9)
2.5
Sensing surface:
Two, four, 0.25 dia.
Two, 2.2-dia. mounting 5 4.5
holes with two, 4.4-dia. countersinks
*Material: Aluminum
Note: Mounting screws (countersunk
screw M2 × 8 2 pcs) included
43
Fiber Units with Reflective Sensors
Long-distance/High-power Models
Indicates models that allow free cutting.
E32-D16
E32-D11L
22
Two,
5.8-dia
lenses
9
11
2,000
6.5
Two, 1.4 dia.
8.5
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75*
4 dia.
Optical fiber: Two, 2.2 dia.
17.5
Optical
axis
Optical
axis
Sensing head*
Two, 3.2-dia.
mounting holes with
6-dia. countersinks
Optical fiber:
Two, 2.2 dia.
5.2
10
2.4
3
20
2,000
*Material: Brass/nickel plating
*Material: Aluminum
E32-D21L
E32-D22L
Two Fiber Attachments (E39-F9)
Two hexagonal nuts
25
Two toothed washers
10
Sensing head: M4 × 0.7*
Optical fiber: Two, 1 dia.
Two, 0.9 dia.
3.2
3
Two Fiber Attachments (E39-F9)
25
10
Sensing head:
Optical fiber: Two, 1 dia.
Two, 0.9 dia. 2.7 dia. 3 dia.*
3
2.4
15
7
15
2,000
*Material: Brass/nickel plating
2,000
*Material: Brass/nickel plating
Ultracompact/Thin-sleeve Models
E32-D33
E32-D331
Attachment
Two Fiber Attachments (E39-F9)
25
10
Optical fiber:
Two, 1 dia.
Heatshrinkable
tube
Stainless-steel tube: 0.8 dia.
Sensing head: 3 dia.*
Two, 0.25 dia.
Stainless-steel tube: 0.5 dia.
Two, 0.125 dia.
25
Irraxtube: 1.2 dia.
Sensing head: 2 dia. *1
10
Brancher: 3.5 dia.
15
15
15
15
12
15
2,000
2,000
35
*Material: Stainless steel (SUS303)
100
*1. Material: Stainless steel (SUS303)
Note: The Attachment is attached with adhesive
and cannot be removed.
Coaxial/Small-spot Models
E32-CC200
E32-CC200R
E32-D32L
2,000
Sixteen, 0.25-dia.
reception
Emission fiber:
fibers
1 dia.
2.5 dia.
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75* Optical fiber: Two 2.2 dia.
Emission fiber: 1 dia.
15
Sensing head: 3 dia.*
Sixteen, 0.265-dia.
reception fibers
5.2
10
3
2.4
23
25
2,000
*Material: Stainless steel (SUS303)
E32-C41
Two toothed Two hexagonal
washers
nuts
Irraxtube: 2.6 dia.
1.8
Brancher
(ABS resin):
3.5 dia.
Fiber
White markings:
Attachment
Optical fiber: Emission side
Two, 1.2 dia. (heat-shrinkable tube)
15
(5)
(100)
17
15
22
Heat-shrinkable
tube
Two Fiber Attachments (E39-F9)
25
10
Optical fiber:
Two, 1 dia.
Note: The Fiber Attachment is attached with adhesive and cannot be removed.
12
2
2,000
*Material: Stainless steel (SUS303)
Note: There is a white line on the cable fiber that is inserted in the emitter-side port.
E32-C42
1 × 0.175 dia.
(emission fiber)
Brancher
(ABS resin) 3.5 dia.
Sensing head: 2 dia.*
3 dia.
15
2
25
1,000
22
Four, 0.25-dia.
reception fibers
6 × 0.175 dia.
(reception fibers)
10
*Material: Stainless steel (SUS303)
44
Sensing head:
2 dia.*
3 dia.
12
Note 1. There is a white line on the cable fiber that is inserted in the
emitter-side port.
2. The core diameter of the sensing head is assumed to lie in the
range 2.44 to 2.49 mm.
Sensing head:
M3 × 0.5*
Optical fiber:
Two 2.2 dia.
Note: There is a yellow dotted line on the fiber that is inserted in the emitter-side
port.
Emission fiber:
0.5 dia.
6 × 0.175 dia.
(reception fibers)
Brancher (heat-resistant,
ABS, black): 6 dia.
E32-D32
Two Fiber Attachments (E39-F9)
25
10
Two hexagonal nuts
Optical fiber:
Emission fiber: Sensing head: Two toothed washers
M3
×
0.5*
Heat-shrinkable tube Two, 1 dia.
0.5 dia.
1 × 0.175 dia.
(emission fiber)
1,570
*Material: Stainless steel (SUS304)
Note: There is a white line on the fiber that is inserted in the emitter-side port.
E32-C31
20
15
2,000
*Material: Brass/nickel plating
Four,
0.25-dia.
reception 2.5
fibers
400
White markings:
Two Fiber Attachments
Emission side
(heat-shrinkable tube)
Optical fiber:
Two, 1.2 dia.
Irraxtube: 2.6 dia.
15
(5)
(100)
10
25
1,000
22
*Material: Stainless steel (SUS303)
Note: The Fiber Attachment is attached with adhesive and cannot be removed.
Fiber Units with Reflective Sensors
Area-sensing Models
E32-D36P1
25
2,000
5
10
Optical fiber:
Two, 2.2 dia.
15
Two, 3.2-dia. mounting holes
2 10.85
32 × 0.265 dia.
(emission and reception fibers in alternating arrangement)
5
*Material: Brass/nickel plating
Sensing head*
Retroreflective Fiber Units
E32-R21
(An E39-R3 Reflector is provided as an accessory.)
E32-R16
(An E39-R1 Reflector is provided as an accessory.)
27
15
Two Fiber Attachments
Two hexagonal nuts
Lens
Two washers Silicon tube
(PMMA) Sensing head*
M6 × 0.75
Optical fiber:
Two, 1 dia.
5 dia.
25
7
10
10
7.2
16
(6)
4
Sensing head *1
2.2
10
3
2.8
11
17.8
14
2,000
21.5
8
15.2
*Material: ABS
27.8
Optical fiber: Two, 2.2 dia.
Standard length: 2 m
Lens (PMMA)
Two, M3 set screws (provided)
*1. Material: ABS
Convergent-reflective Models
E32-L24S
E32-L16
2,000
11
Optical fiber: Two, 2.2 dia.
4
2,000
25
Optical fiber: Two, 1 dia.
3.5
10
17.5
12.3
9
3.6 dia.
11
2.2 dia.
2
Optical axis
2.5
22.5
4.5
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
on both sides
14
3.5
7
Optical axis
2.5
Sensing head*
2
0.75
1
*Material: ABS
*Material: ABS
Sensing head*
3.8
Two Fiber Attachments (E39-F9)
E32-L24L
Two, 3.2-dia. mounting holes with 6-dia.
countersinks on both sides
1.7
E32-L25L
Sensing distance
4
3.6
3.3
Two, 3.2-dia. lenses
1.5
18
3.3
20
Two, 3.2-dia. lenses
Side-view prism (PC)
10
Optical fiber: Two, 1 dia.
6.5
Sensing distance
18
Two Fiber Attachments (E39-F9)
25
6
25
6
Optical
axis
4
Two Fiber Attachments (E39-F9)
4
16
Sensing head*
Sensing head*
Two, 3.2-dia. mounting holes
with 6-dia. countersinks on both sides
Two, 3.2-dia. mounting holes
with 6-dia. countersinks on both sides
2,000
2,000
*Material: Polycarbonate
*Material: Polycarbonate
E32-L25
20
10
5
6.5
20
10
Optical fiber: Two, 1 dia.
6.5
4
Sensing distance
E32-L25A
5
4
20
10
Sensing distance
4.8
4.8
6.5
6.5
20
Optical fiber: Two, 2.2 dia.
6.5
Sensing head*
Sensing head*
Two, 3.2-dia. holes with
6-dia. countersinks
Two, 3.2-dia. holes
with 6-dia. countersinks
2,000
2,000
*Material: Heat-resistant ABS
Note: There is a white line on the fiber that is inserted in the emitter-side
port.
Optical fiber:
Two, 2.2 dia.
Note: There is a white line
on the fiber that is inserted in the emitterside port.
*Material: Heat-resistant ABS
45
Fiber Units with Reflective Sensors
Convergent-reflective Models
Indicates models that allow free cutting.
E32-L86
A
B
2,000
33.5
19
11
7
Optical axis
Two, 4 dia.
Note: The maximum allowable temperatures
for sections A and B are 200“C and
110“C, respectively. The section inserted into the Amplifier Unit (indicated by
*2), however, must stay within the Amplifier Unit's operating temperature
range.
25
5 (max.)
13 *2
18
8.9
27
4 dia.
Two, 3.2-dia. holes with 6-dia. countersinks on one side
5.5
Sensing head (stainless steel) Flexible tube: 2.8 dia.*1
*1 Material: Stainless steel
Heat-resistant Models
E32-D51
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75*
Two, 1.5 dia.
Optical fiber: Two, 2.2 dia.
4.9
3.1
2.4
3
10
13
17
2,000
*Material: Brass/nickel plating
Note: The maximum allowable temperature is 150“C. The maximum
allowable temperature for continuous operation is 130“C.
E32-D81R-S
E32-D81R
Using the E32-D81R-S
Two toothed washers (SUS)
Two hexagonal nuts (SUS)
Sensing head: M6 × 0.75 *1 SUS flexible tube
Protective tube (gray)
(4.2 dia.)
5 dia.
Fiber: 1.2 dia.
M4 × 0.7
Using the E32-D81R
SUS303
2.2 dia. Sleeve
5 dia.
4.5 8.5
8 15
3
2
3
Note 1. The maximum allowable temperatures for sections A and B are 200“C
and 110“C, respectively. The section
inserted into the Amplifier Unit (indicated by *2), however, must stay
within the Amplifier Unit's operating
temperature range.
2.2 dia.
Sleeve
11.5
15
B
5
(70)
5
20
2,000
5
10 *2
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
6.5
5
16.5
6.4
13 *2
B
A
*1. Material: Stainless steel (SUS303)
E32-D61-S
E32-D61
Using the E32-D61-S
1.4 dia. M4 × 0.7
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75 *1
5 dia. *3
3.5 dia.
Using the E32-D61
Hexagonal
caulking 5 dia.
2.2 dia. Sleeve
5 dia.
SUS316L Sleeve
4.5 8.5
10
3
2
20 2.4
3
5
2,000
5 *4
Note 1. The maximum allowable temperatures for sections A and B are 350“C
and 110“C, respectively. The section
inserted into the Amplifier Unit (indicated by *2), however, must stay
within the Amplifier Unit's operating
temperature range.
SUS flexible tube
11.5
15
A
8
5
10 *2
5
B
16.5
*2
13
6.5
15
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
6.4
B
*1. Material: Stainless steel (SUS303)
*3. The diameter is 6 if the fiber length exceeds 10 m.
*4. The diameter is 10 if the fiber length exceeds 10 m.
E32-D73-S
E32-D73
1 dia.
Using the E32-D73-S
Two hexagonal nuts
Two toothed washers
SUS flexible tube
Sensing head: M4 × 0.7 *1
5 dia.
4 dia.
2.8 dia.
Stainless-steel tube:
1.25 dia.
1.65 dia. 2.5 dia.
Using the E32-D73
Hexagonal caulking
5 dia.
2.2 dia. Sleeve
SUS316L Sleeve
4.5 8.5
7
5
5
2.4
5
60
20
10
2,000
A
B
11.5
10 *2
5
15
8
5
16.5
C
6.5
*2
13
Note 1. The maximum allowable temperatures for sections A, B, and C are
400“C, 300“C, and 110“C, respectively. The section inserted into the
Amplifier Unit (indicated by *2), how15
ever, must stay within the Amplifier
Unit's operating temperature range.
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
6.4
C
*1. Material: Stainless steel (SUS303)
Chemical-resistant Models
E32-D12F
E32-D14F
2,000
(26)
Sensing head: 6 dia.
Fluororesin
5 dia.
Optical fiber: Two, 2.2 dia.
16
2,000
46
100
4.5
Optical Sensing head: 7 dia.
axis
Optical-axis mark
100
Fluororesin tube
(protective cover)
Optical fiber: 2.2 dia.
Dimensions
(Unit: mm)
Application-corresponding Fiber Units
Label-detection Models
E32-G14
36.3
2,000
25.2
20
Sensing head*
9.2
R1.6
R1.6
Liquid-level Detection Models
E32-D36T
R3.5
24
Lens
(PMMA)
3.2
10 Optical axis
9
15
1.6
Optical fiber:
Two, 2.2 dia.
1.6
9.4
5
5
20.4
Eight, R0.5 Optical fiber: Two, 2.2 dia.
Emission side: Sixteen, 0.265 dia.
Sensing head 13.25
2
23.5
4
4
2,000
23.45
11.4
R10
8.4
8
7.6
5
*Material: ABS
Thirty-two,
0.265 dia.*
4.4
Reception side: Sixteen, 0.265 dia.
E32-L25T
2.8
Two, 3.2-dia. lenses (PC)
1.2
Two Fiber Attachments (E39-F9)
25
16
10
(13) 15.2
4
Optical fiber: Two, 1 dia.
Mounting hole
6
6
Sensing head (PC)
18
E32-A01
2,000
E32-A02
Sensing head*
Sensing head*
Optical fiber: 2.2 dia.
Optical fiber: 2.2 dia.
14.5
4.5
3.3
1.7
Tube holder
Sensing surface (2 × 11)
4.2
7
20
Optical axis
27
5,000
Tube holder
Sensing surface (2 × 11)
Receiver
19.9
3
Optical axis
12
4.5
27
21 5
5,000
*Material: ABS for the sensing head,
PMMA for the prism,
and PBT for the pipe holder.
*Material: ABS for the sensing head,
PMMA for the prism,
and PBT for the pipe holder.
Emitter
E32-D82F1
E32-D82F2
Sensing head (fluororesin): 6 dia.
Fiber connector (brass/nickel plating): 9 dia.
8 dia. Optical fiber: Two, 2.2 dia. *2
Note: The maximum allowable temperatures
for sections A and B are 200°C and
85°C, respectively.
To the Amplifier Unit
7.2
Length of unbendable
section: 150 (350) *1
27
42
2,000
2,000
A
B
1,500 mm from the tip
*1. ( ): E32-D82F2
*2. The 2-m section of optical fiber on the Amplifier-unit side is plastic and therefore allows free cutting.
47
Application-corresponding Fiber Units
Models for Glass-substrate Alignment/Mapping
Indicates models that allow free cutting.
E32-A08
E32-A07E1(E2)
E32-L66
21.7
14
1
2,000
24.5
10.7 6.5
3.8
A
11
B
2,000
25
5
7
13 *2
Reception fiber: 2.2 dia.
18
12
1.1
Two, 3.2-dia. mounting holes
with four, 6-dia. countersinks
Optical axis
2.2 dia.
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
Emission fiber: 2.2 dia.
4 dia.
*1. Material: Stainless steel (SUS303)
Sensing head *1
5.5
5
36
Two, 2.8-dia. flexible tubes (stainless steel)
* The E32-A07E1(E2) has a reception fiber and an
emission fiber. Use the fiber with a model display tube
(fiber with blue dotted line) as light emitting side.
Note: The maximum allowable temperatures for sections A and B are
300°C and 110°C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range.
E32-A09
E32-A09H
E32-A09H2
Optical axis
2,000
23
9
7
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
*Material: Aluminum
Sensing head*
5
28
13 *2
2.8-dia. flexible tubes*
8.9 24
Lens: 5.8 dia.
12
B
2,000
Two, 3.24-dia. mounting holes
with four, 6-dia. countersinks
Optical fiber: Two, 2.2 dia.
8.9 20
Lens:
5.8 dia.
A
30
12 7
Optical
9
axis
Sensing head *1
2.2 dia.
5 dia. 4 dia.
*1. Material: Stainless steel
Note: The maximum allowable temperatures for sections A and B
are 300°C and 110°C, respectively. The section inserted into
the Amplifier Unit (indicated by *2), however, must stay within
the Amplifier Unit's operating temperature range.
Wafer-mapping Models
E32-A03
0.4
E32-A03-1
2,000
20.5
1.8
Two, R1.6
25
2,000
24.5
3.2
Stamp (1-mm dia.)
10
4.3 17.6 11
3 dia.
3.4
Sensing head *1
R1.6
3.2
Fiber Attachment (E39-F9)
4.5
10
E39-L83 Mounting Bracket (SUS)
13
Sensing
surface
*Material: Brass/nickel plating
2 dia.
3.5
3
10
2
Optical fiber: 1 dia.
18.5
3 dia.
6.5 3
12.5
25
Stamp (1-mm dia.)
Two, 3.4 dia.
Fiber Attachment (E39-F9)
*Material: Brass/nickel plating
Sensing head *
2 dia.
Sensing surface
10
Note: Use the stamped surface and its opposing surface as installation (reference) surfaces.
Note 1. Use the stamped surface and its opposing surface as installation (reference) surfaces.
2. Set of two symmetrical parts.
E32-A04
E32-A04-1
4
25
2,000
20.5
Four, R1.35
Stamp
(1-mm dia.)
Optical fiber: 1 dia.
21
10
2 dia.
2
2 dia.
2
2
Sensing head *
1.2 dia.
2
*Material: Stainless steel (SUS303)
Installation
(reference)
surface
Sensing surface
Note: Use the stamped surface and its opposing surface as installation (reference) surfaces.
48
9
1.2
Optical
axis
Sensing surface
Optical fiber: 1 dia. 10
4
2 dia.
Fiber Attachment
(E39-F9)
Stamp (1-mm dia.)
2,000
25
2
2.5
Two, M2
3.5 10
17
1.2 dia.
2
Note: Set of two symmetrical parts.
Fiber Attachment (E39-F9)
Sensing head * *Material: Stainless steel (SUS303)
Accessories
Lens Units
Lens Units
E39-F1
Side-view Units
E39-F2
M2.6
Effective depth: 3.2
2.8 dia. Spot-facing depth: 0.9
M2.6 × 0.45
Effective depth: 3.8
Spot-facing depth: 0.9
4 dia.
4 dia.
5.7
8.9
Material:
Brass for the body and optical glass for the lens itself.
Material:
9.2
Brass for the body and optical glass for the lens itself.
Note: Two per set.
Note: Two per set.
Reflection Unit with Lens
M3 internally
E39-F3
Two, 4 dia. toothed washer
Two, M3 × 3
slotted-head set screws*
12
6.4
18
Material:
Brass for the body
and aluminum for
the base.
Two, 3.2 dia.
6.4
3
8±0.2
3.6
M3 × 6 angle-setting
screw
6.5
20.7
8.5
*Secure the fiber head with the slotted-head set screws. Do not insert a lens
(E39-F1).
Lens Unit for Reflective Fiber Units
E39-F3A
Lens Unit for Reflective Fiber Units
E39-F3A-5
M2 × 2 Allen-head set screw
(for securing the fiber)
Straight knurling
6 dia. 4 dia.
3
Lens surface
(lens diameter: 3.7 mm)
Material:
Aluminum for body and
optical glass for lens.
13
2.1 dia.
23
Note: This is the Lens Unit for the E32-D32 and E32C42.
Lens Unit for Reflective Fiber Units
E39-F3B
6.5
16.5
Lens surface
(lens diameter: 3.7 mm)
Material:
Aluminum for body and optical
glass for lens
Note: This is the Lens Unit for the
E32-C31 and E32-C41.
Straight knurling
5 dia.
4.3 dia.
5.8
Material:
Aluminum for body and
optical glass for lens.
M3 × 0.5 Effective screw length: 3
Lens Unit for Reflective Fiber Units
E39-F3C
6 dia. 5.5 dia.
Lens surface
(lens diameter: 4.8 mm)
2.1 dia.
5 dia.
4 dia.
24.1
25.2
M3 × 0.5 Depth: 4.4
Note: This is the Lens Unit for the
E32-C31 and E32-C41.
M3 × 0.5 Effective screw length: 3
10.9
Lens surface
(lens diameter: 3.7 mm)
Material:
Aluminum for body and
optical glass for lens.
Note: This is the Lens Unit for the
E32-C31 and E32-C41.
49
Accessories
Protective Spiral Tubes
E39-F32A/F32A5
E39-F32B/F32B5
M3 × 0.5; depth: 4
Head connector *1
(4.6 dia.)
End cap *1
3 dia.
6 dia.
12
12
Tube *2
L
*1. Material: Brass/nickel plating
*2. Material: Stainless steel (SUS304)
Note 1. The length L is 1,000 for the E39-F32A/-F32B and 500 for the E39-F32A5/-F32B5.
2. The E39-F32B(5) consists of two E39-F32A(5)s.
E39-F32C/F32C5
M4 × 0.7; depth: 4
Head connector *1
(5.6 dia.)
End cap *1
4 dia.
7 dia.
12
12
Tube *2
L
*1. Material: Brass/nickel plating
*2. Material: Stainless steel (SUS304)
Note: The length L is 1,000 for the E39-F32C and 500 for the E39-F32C5.
E39-F32D/F32D5
M6 × 0.75; depth: 4 Head connector *1
(7 dia.)
End cap *1
5 dia.
8.5 dia.
12
12
Tube *2
L
*1. Material: Brass/nickel plating
*2. Material: Stainless steel (SUS304)
Note: The length L is 1,000 for the E39-F32D and 500 for the E39-F32D5.
Other Accessories
Fiber Cutter
E39-F4
8
Thin-fiber Attachments
E39-F9
45
1.1 dia.
Mark indicating position of insertion
into Amplifier Unit
24.5
(2.2 dia.)
Material: ABS
3.6 dia.
Retention
Fiber: 2.2 dia. clip *2
Retention
clip *2
Splice *1
3.8 dia.
11.7
25
Note: Two per set.
*Provided with thin-fiber models.
Standard-fiber insertion hole Thin-fiber insertion hole
Fiber Connector
E39-F10
10
Fiber: 2.2 dia.
3 dia.
26
12.8
*1. Material: Polyester
*2. Material: Brass
Fiber Connector
E39-F13
E39-F14
E39-F15
(48.6)
9.2
32.6
29.6
7.6
3.2
2
Note: Dimension A varies with the model
number as shown in the following table.
8
33.8 22.4 20.4
Four, 6 dia.
Four, A
(See note.)
Four, 0.8
Sleeve Bender
E39-F11
10.8
R12.5
R7.5
27
50
42.5
10
10
Four, R0.8
R5
R10
27.4
Model
E39-F13
E39-F14
E39-F15
Dimension A
2.4
1.2
2.4/1.2
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
Fiber Units
● Mounting
Tightening Force
The tightening force applied to the Fiber Unit should be as follows:
Screw-mounting Model
Fiber Cutting Procedure
Cut a thin fiber as follows:
An attachment is
temporarily fitted to
a thin fiber before
(1) shipment.
Temporarily fitted
Secure the attachment after adjusting
(2) the position of it in
the direction indicated by the arrow.
Insert the fiber to be
cut into the E39-F4.
(3)
Two holes for
thin fiber
Retaining screw
(flat head or sunken head)
(M3 max.)
Toothed washers
Three holes for
standard fiber
(2.2-mm dia.)
Use a proper-sized wrench.
Nuts
(attachment)
E32-M21
E32-T16
E32-R21
E32-T16W(R)
E32-T16P(R)
E32-T16J(R)
E32-L24S
E32-L24L
E32-T25L
Cutter
(E39-F4)
Cylindrical Model
Spring mounting clip
Fiber Units
M6 screw/
6-mm dia. cylinder
M3/M4 screw
2-mm dia./3-mm dia.
cylinder
1.5-mm dia./1-mm dia.
cylinder
E32-L25A
Thin fiber attachment
(E39-F9)
(4)
Finished state
(proper cutting
state)
Approx. 0.5 mm
Insertion direction
Note: Insert the fiber in the direction
indicated by the arrow.
Clamping torque
0.98 N·m max.
0.78 N·m max.
0.29 N·m max.
0.2 N·m max.
0.78 N·m max.
Up to 5 mm to the tip: 0.49 N·m max.
More than 5 mm from the tip:
0.78 N·m max.
0.49 N·m max.
0.39 N·m max.
Connection
• Do not pull or press the Fiber Units. The Fiber Units have a
withstand force of 9.8 N or 29.4 N maximum.
• Do not bend the Fiber Unit beyond the permissible bending
radius given under Ordering Information.
• Do not bend the edge of the Fiber Units
(excluding the E32-T@R and E32-D@R).
Correct
Incorrect
20 mm min.
Amplifier Unit
Fiber Unit
20 mm min.
0.29 N·m max.
• Do not apply excess force on the Fiber Units.
Correct
Incorrect
Fiber Unit
Nylon wireholder
Chemical-resistive Models
The following method is recommended to prevent the fluororesin case
from cracking when the Sensor is being secured. Be especially
careful not to crack the case when using screws to secure the Sensor.
The Fiber Head could be broken by excessive vibration. To
prevent this, the following is effective:
Fiber Sensing Head
A one-turn loop can
absorb vibrations.
Tape
51
E39-F11 Sleeve Bender
• The bending radius of the stainless steel tube should be as
large as possible. The smaller the bending radius becomes,
the shorter the sensing distance will be.
• Insert the tip of the stain1.2 mm dia. max.
less steel tube to the
1.3 mm dia. min.
R10 mm
Sleeve Bender and bend
the stainless steel tube R12.5 mm
R5 mm
slowly along the curve of R7.5 mm
the Sleeve Bender.
Fiber tip
position
mark
90° max.
Stainless
steel tube
10 mm
10 mm
Heat-resistant Fiber Units
(E32-D51 and E32-T51)
• The fibers of these Units cannot be extended using the E39F10 Fiber Connector.
• The maximum allowable temperature for continuous operation with these Units is 130°C. It is 150°C for short-term use.
E32-T14 and E32-G14
Stickers
Wafer Sensors (E32-L25(A))
• To ensure correct performance, insert the fiber with a white
line into the emitter-side port of the Amplifier Unit.
E32-T16 and E32-T16P
Example
E32-T16's sensing head
Slit provided
To use the slit provided, peel off the
backing sheet, align it with the edges of the sensing surface, and attach it to the sensing head. Use the
slit in applications where saturation
occurs (i.e., changes in light intensity cannot be obtained) due to
short sensing distances.
E32-M21
Separate the 4 fibers by distances sufficient to prevent interference.
Vacuum-resistant Fiber Units (E32-V)
Although Flanges, Fiber Units on the vacuum side, and Lens
Units have been cleaned, as an extra precaution, clean these
products with alcohol before use in high-vacuum environments to ensure that they are properly degreased.
Liquid-level Detection Sensors (E32-D82F)
• Secure the Fiber Unit using the unbendable section. Otherwise, the liquid-level detection position may be displaced.
• For applications in hazardous environments, install the Fiber Unit in the hazardous environment but install the Amplifier Unit in a safe environment.
52
E32-A07E1(E2)
There is a difference in sensing
object angle between E32-A07E1
and E32-A07E2. Select a model in
accordance with the bending
direction of a sensing object. Use
the fiber with a model display tube
as light emitting side.
View from the cable drawing side
Sensing object
Emission Reception
E32-A07E2
Reception Emission
E32-A07E1
● Adjustment
Do not bend here.
These Units may enter the light-ON
state if there are reflecting objects at
the ends of the lenses. In this case,
attach the black stickers provided to
the ends of the lenses.
Liquid-level Detection Sensors: Tube-mounting Models
• Ensure that the tube is not deformed when using a band to
secure the Fiber Unit.
• Drops of water, bubbles, or haze inside the tube may cause
malfunctions.
E32-G14
The sensing distance is short, making the incident light intensity large. This makes it impossible to teach without a workpiece. Perform teaching with and without a workpiece.
Liquid-level (E32-D82F) Detection Position
The liquid-level detection position is at a distance of
5.2±2 mm from the end of the
fluororesin section.
Liquid-level detection
position
(Refer to the diagram on the
5.2±2 mm (from the end of the
right.)
fluororesin section)
The liquid-level detection position varies with the surface
tension of the liquid and the degree of wetness at the Fiber
Unit's detection position.
● Other Considerations
Liquid Level (E32-D82F)
• Operation may become unstable in the following cases:
A Bubbles stick to the cone of the sensing head.
B Solute is deposited on the cone of the sensing head.
C The liquid has a high viscosity.
• There are some liquids, such as milky white liquids, for
which detection is not possible.
• Do not let the end of the fluororesin section bump into another object. Damage to, or deformation of, the sensing
head may result in unstable operation.
Heat-resistant Fiber Units (E32-D81R, E32-D61, and E32D73)
The pitch of the emission-side and reception-side fiber-insertion ports varies with the Amplifier Unit. Be sure to use an appropriate Fiber Unit.
Amplifier Unit
E3X-DA@-S
E3X-MDA@
E3X-DA@-N
E3X-NA@
Fiber Unit
E32-D@-S
E32-D@
Chemical-resistant Fiber and Liquid Level (E32-D82F)
Fluororesin has high chemical resistance. However, applications in
the atmosphere of vaporized chemicals (gases) or steam may cause
malfunction or damage inside sensors. Run a full check before using
in such environments.
■ Accessories
Use of E39-R3 Reflector
1. Use detergent, etc., to remove any dust or oil from the
surfaces where tape is applied. Adhesive tape will not be
attached properly if oil or dust remains on the surface.
2. The E39-R3 cannot be used in places where it is exposed
to oil or chemicals.
E39-F32@ Protective Spiral Tubes
1. Insert a fiber to the Protective
Spiral Tube from the head
connector side (screwed) of the
tube.
E39-F10 Fiber Connector
Mount the Fiber Connector as shown in the following
illustrations.
Fiber Unit
Splice
Fiber Unit
Retention unit
Protective Spiral
Tube
Retention
unit
Fiber Unit
Fiber Unit
2. Push the fiber into the
Protective Spiral Tube. The
tube should be straight so that
the fiber is not twisted when
inserted. Then turn the end cap
of the spiral tube.
3. Secure the Protective
Spiral Tube on a suitable
place with the attached
nut.
Protective Spiral
Tube
Mounting panel
Protective Spiral
Tube
4. Use the attached saddle to
secure the end cap of the
Protective Spiral Tube. To
secure the Protective Spiral
Tube at a position other than
the end cap, apply tape to the
tube so that the portion
becomes thicker in diameter.
Fiber Unit
Fiber Unit
• The Fiber Units should be as close as possible when they
are connected.
Sensing distance will be reduced by approximately 25%
when fibers are connected.
• Only 2.2-mm dia. fibers can be connected.
Hexagon clamping nut
Fiber Unit
Toothed washer
Saddle
Tube
End cap
53
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or
comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in
its entirety.
A host of remarkable functions inside a compact body.
A complete lineup of sensor heads to
handle an even wider range of applications.
This is the platform for OMRON’s sensing technology.
Laser-type Smart Sensors
ZX-L Series
Linear Platform
Inductive Displacement
Smart Sensors
ZX-E Series
High-resolution sensing using laser
and magnetic technology.
Smart Monitor
An improved lineup for smarter sensing.
Digital Fiber Sensors
E3X-DA-S Series/MDA Series
ON/OFF Platform
A lineup of Smart Sensors that use the eddy
current method.
Laser-type Photoelectric Sensors
with Separate Digital Amplifiers
E3C-LDA Series
A common platform for Fiber Sensors
and Sensors with Separate Amplifiers.
Mobile Console
Refinement and a new generation that goes
beyond superior performance.
Photoelectric Sensors with Separate Digital
Amplifiers have joined the Smart Sensor family.
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user
must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
Note: Do not use this document to operate the Unit.
Authorized Distributor:
Note: Specifications subject to change without notice.
2007. 12
OMRON Corporation
In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.