SAMSUNG CL10A106KQ8NNNC

SPECIFICATION(Reference sheet)
 Supplier : Samsung electro-mechanics
 Samsung P/N : CL10A106KQ8NNNC
 Product : Multi-layer Ceramic Capacitor
 Description :
CAP, 10㎌, 6.3V, ±10%, X5R, 0603
A. Samsung Part Number
① Series
CL
10
A
106
K
Q
8
N
N
N
C
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Samsung Multi-layer Ceramic Capacitor
② Size
0603 (inch code)
③ Dielectric
X5R
④ Capacitance
⑤ Capacitance
L: 1.6 ± 0.1
⑥ Rated Voltage
6.3 V
⑦ Thickness
0.8 ± 0.1
mm
0.8 ± 0.1
W:
⑧ Inner electrode
Ni
Termination
Cu
Plating
Sn 100%
10 ㎌
±10 %
tolerance
mm
mm
(Pb Free)
⑨ Product
Normal
⑩ Special
Reserved for future use
⑪ Packaging
Cardboard Type, 7" reel
B. Samsung Reliability Test and Judgement condition
Performance
0.5±0.1Vrms
Rated Voltage
60~120 sec.
Resistance
10,000Mohm or 100Mohm㎌
Whichever is Smaller
Appearance
No abnormal exterior appearance
Withstanding
No dielectric breakdown or
Microscope (10)
250% of the rated voltage
Voltage
mechanical breakdown
Temperature
X5R
Characteristics
Adhesive Strength
(From -55℃ to 85℃, Capacitance change should be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
of Termination
terminal electrode
Bending Strength
Capacitance change :
Tan δ (DF)
Insulation
Within specified tolerance
Test condition
1㎑±10%
Capacitance
0.1 max.
within ±12.5%
Bending to the limit (1mm)
with 1.0mm/sec.
Solderability
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Capacitance change :
Soldering heat
Tan δ, IR : initial spec.
within ±7.5%
Solder pot : 270±5℃, 10±1sec.
Performance
Vibration Test
Moisture
Resistance
Capacitance change :
within ±5%
Test condition
Amplitude : 1.5mm
Tan δ, IR : initial spec.
From 10㎐ to 55㎐ (return : 1min.)
Capacitance change :
2hours  3 direction (x, y, z)
With rated voltage
within ±12.5%
Tan δ : 0.125 max
IR :
High Temperature
Capacitance change :
Resistance
Tan δ : 0.125 max
IR :
40±2℃, 90~95%RH, 500+12/-0hrs
12.5㏁·㎌ or Over
within ±12.5%
With 150%
of the rated voltage
Max. operating temperature
25㏁·㎌ or Over
1000+48/-0hrs
Temperature
Capacitance change :
Cycling
Tan δ, IR : initial spec.
within ±7.5%
1 cycle condition
Min. operating temperature
25℃
→
25℃
→
Max. operating temperature →
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
Product specifications included in the specifications are effective as of March 1, 2013.
Please be advised that they are standard product specifications for reference only.
We may change, modify or discontinue the product specifications without notice at any time.
So, you need to approve the product specifications before placing an order.
Should you have any question regarding the product specifications,
please contact our sales personnel or application engineers.