UTC-IC CD4011B

UNISONIC TECHNOLOGIES CO., LTD
CD4011B
CMOS IC
QUAD 2-INPUT NAND
BUFFERED B SERIES GATE
„
DESCRIPTION
The UTC CD4011B contains four independent 2-input NAND
gates which perform the function Y=A • B in positive logic.
„
SOP-14
FEATURES
* 5V-10V-15V Parametric Ratings
* Quad 2-Input NAND Gate
* Symmetrical Output Characteristics
* Maximum Input Current of 1uA at 15V Over Full Package Temperature Rage
* Low Power TTL:
Fan Out of 2 Driving 74L or 1 Driving 74LS Compatibility
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
CD4011BL-S14-R
CD4011BG-S14-R
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Package
Packing
SOP-14
Tape Reel
1 of 5
QW-R502-517.b
CD4011B
CMOS IC
„
PIN CONFIGURATION
„
FUNCTION TABLE (each gate)
INPUT(A)
H
H
L
L
INPUT(B)
H
L
H
L
OUTPUT(Y)
L
H
H
H
LOGIC DIAGRAM (positive logic)
„
nA
nB
nY
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
nA
nB
&
nY
2 of 5
QW-R502-517.b
CD4011B
„
CMOS IC
ABSOLUTE MAXIMUM RATING(unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
VDD
-0.5 ~ 18
V
V(nA,nB)
-0.5 ~ VDD +0.5
V
V(nY)
-0.5 ~ VDD +0.5
V
Storage Temperature
TSTG
-65 ~ + 150
℃
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
Input Voltage
Output Voltage
„
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
Operating Temprature
„
SYMBOL
VDD
TOP
RATINGS
3 ~ 15
-55 ~ 125
UNIT
V
℃
ELECTRICAL CHARACTERISTICS(Ta=25°С)
PARAMETER
SYMBOL
High-Level Input Voltage
VIH
Low-Level Input Voltage
VIL
High-Level Output Voltage
VOH
Low-Level Output Voltage
VOL
High-Level Output Current
(NOTE)
IOH
Low-Level Output Current
(NOTE)
Input Leakage Current
IOL
II(LEAK)
Quiescent Supply Current
IQ
TEST CONDITIONS
VDD= 5V, VO=0.5V
VDD= 10V, VO=1.0V
VDD= 15V, VO=1.5V
VDD= 5V, VO=4.5V
VDD= 10V, VO=9.0V
VDD= 15V, VO=13.5V
VDD= 5V, │I0│<1μA
VDD= 10V, │I0│<1μA
VDD= 15V, │I0│<1μA
VDD= 5V, │I0│<1μA
VDD= 10V, │I0│<1μA
VDD= 15V, │I0│<1μA
VDD= 5V, VO=4.6V
VDD= 10V, VO=9.5V
VDD= 15V, VO=13.5V
VDD= 5V, VO=0.4V
VDD= 10V, VO=0.5V
VDD= 15V, VO=1.5V
VDD= 15V ,VIN = VDD or GND
VDD= 5V, VIN = VDD or VSS, IOUT = 0
VDD= 10V, VIN = VDD or VSS, IOUT = 0
VDD= 15V, VIN = VDD or VSS, IOUT = 0
MIN
3.5
7.0
11.0
4.95
9.95
14.95
-0.51
-1.3
-3.4
0.51
1.3
3.4
TYP
3
6
9
2
4
6
5
10
15
0
0
0
-0.88
-2.25
-8.8
0.88
2.25
8.8
0.004
0.005
0.006
MAX
UNIT
V
1.5
3.0
4.0
V
V
0.05
0.05
0.05
V
mA
0.1
0.25
0.5
1.0
µA
µA
Note: IOL and IOH are tested one output at a time
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R502-517.b
CD4011B
„
CMOS IC
SWITCHING CHARACTERISTICS(TA=25°С, Input: tR=tF=20ns,unless otherwise specified )
PARAMETER
SYMBOL
tPLH
Propagation delay from
Input(A or B) to Output(Y)
tPHL
Transition Time
„
tTLH
tTHL
TEST CONDITIONS
VDD=5V, CL=50pF, RL=200kΩ
VDD=10V, CL=50pF, RL=200kΩ
VDD=15V, CL=50pF, RL=200kΩ
VDD=5V, CL=50pF, RL=200kΩ
VDD=10V, CL=50pF, RL=200kΩ
VDD=15V, CL=50pF, RL=200kΩ
VDD=5V, CL=50pF, RL=200kΩ
VDD=10V, CL=50pF, RL=200kΩ
VDD=15V, CL=50pF, RL=200kΩ
MIN
TYP
85
40
30
120
50
35
90
50
40
MAX
250
100
70
250
100
70
200
100
80
UNIT
ns
ns
OPERATING CHARACTERISTICS(Ta=25°С)
PARAMETER
Average Input Capacitance
Power Dissipation Capacitance
SYMBOL
Cin
Cpd
TEST CONDITIONS
Any Input
Any Gate
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
5
14
MAX
7.5
UNIT
pF
4 of 5
QW-R502-517.b
CD4011B
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Output
RL
200kΩ
CL
50pF
Definitions for test circuit
VI
VCC
50%
50%
t PLH
t PHL
0V
VOH
Vo
50%
50%
VOL
Propagation Delay Times
Note: CL includes probe and jig capacitance.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-517.b