S4558P Semiconductor Low Noise Dual OP AMP Description The S4558 is a monolithic Integrated Circuit designed for dual operational amplifier. Features • • • • • • Power consumption as small as about 50mW (typ.) Built-in output short-circuit protecting circuit. Internal phase consumption type. No latch-up Wide same phase mode and differential voltage ranges High gain. low noise Applications • • • • Active filters Audio amplifiers VCOs Other electronic circuits Ordering Information Type NO. S4558P Marking Package Code S4558P DIP-8 Outline Dimensions unit : mm Block Diagram KSI-L004-000 1 S4558P Absolute maximum ratings Characteristic Symbol Ratings Unit Supply voltage VCC 36 or ±18 V Differential input voltage VIND 30 V Input voltage VIN ±15 V Power Dissipation PD 500 mW Operating temperature Topr -45 ~ +85 °C Storage temperature Tstg -55 ~ +150 °C Electrical Characteristics (Unless otherwise specified. VCC = +15V, VEE=-15V and Characteristic Symbol Input offset voltage VIOS Input offset current IIOS Input bias current Ta = 25 °C) Test Condition Rg ≤ 10 ㏀ Min. Typ. Max. Unit - 0.5 6 mV - - 5 200 nA IIB - - 60 500 nA Input common mode Voltage Range VICR - ±12 ±14 - V ±14 VOM RL≥ 10 ㏀ ±12 Maximum Output Voltage - V RL≥ 2 ㏀ ±10 ±13 - V 86 100 - dB Large signal Voltage Gain GV Vout=±10V, RL≥ 2 ㏀ Common mode rejection ratio CMRR Rg ≤ 10 ㏀ 70 90 - dB Power supply rejection ratio PSRR Rg ≤ 10 ㏀ - 30 150 uV/V GV=1, RL≥ 2 ㏀ - 1.0 - V/us - 4.0 6.0 mA - 2.5 - uVrms Slew Rate SR Supply Current ICC Equivalent input noise voltage VNI Source Current Sink Current RIAA, RS=1 ㏀, f=30 ㎐~30 ㎑ ISOURCE - 27 - - mA ISINK - 27 - - mA KSI-L004-000 2 S4558P Electrical Characteristic Curves Fig. 1 GV - f Fig. 3 IIB - Ta Fig. 5 VOP-P - RL Fig. 2 VOP-P - f Fig. 4 VOM - VCC, VEE Fig. 6 VNI - f KSI-L004-000 3