SHE113MD / SHE113MD-(B) Semiconductor High Efficiency LED Lamp Features • Transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity Application • Message boards Outline Dimensions unit : mm STRAIGHT TYPE STOPPER TYPE 5.0±0.2 5.0±0.2 8.6±0.2 8.6±0.2 0.8±0.2 0.8±0.2 4.0±0.5 0.5 0.5 25.0 MIN 25.0 MIN 1.0MIN 1.0MIN 2.54NOM 2.54NOM 1 2 5.8±0.2 1 2 5.8±0.2 PIN Connections 1. Anode 2. Cathode KLE-3000-000 1 SHE113MD / SHE113MD-(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 120 mW Forward Current IF 40 mA IFP 65 mA Reverse Voltage VR 4 V Operating Temperature Topr -20∼85 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 260℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Ta=25˚C Symbol Test Condition Forward Voltage VF IF= 20mA 1.6 2.0 2.5 V *4Luminous Intensity IV IF= 20mA 230 486 1170 mcd Peak Wavelength λP Δλ IR IF= 20mA - 570 - nm IF= 20mA - 30 - nm VR=4V - - 10 uA IF= 20mA - ±11 - deg Spectrum Bandwidth Reverse Current *3Half Angle θ1/2 Min. Typ. Max. Unit *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *4. Luminous Intensity classification N O P Q 230~350 350~520 520~780 780~1170 KLE-3000-000 2 SHE113MD / SHE113MD-(B) Characteristic Diagrams Fig. 1 IF - VF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 2 IV - IF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram 100 50 0 50 100 Relative Luminous Intensity [%] KLE-3000-000 3 SHE113MD / SHE113MD-(B) These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLE-3000-000 4