AZ DISPLAYS, INC. Complete LCD Solutions AGM6448V Series LCD Module 1. MECHANICAL DATA (1) Product No. AGM6448V (2) Module Size 264.0 (W)mm x 183.0 (H)mm x (3) Dot Size 0.09 (W)mm x 0.31 (H)mm (4) Dot Pitch 0.11 (W)mm x 0.33 (H)mm (5) Number of Dots 640 (W)xRGB x 480 (H)DOTS (6) Duty 1/240 (7) LCD F-STN/Black and White(Normal Black/Negative Image) MAX 9.0 (D)mm /Color Transmissive Type (8) Viewing Direction 6 0’clock (9) Backlight CCFL (10) Controller Without (11) DC/DC Converter Without (12) Weight 495 g(approx.) (13) Recommended CCFT Inverter CXA-L0612-VMR (TDK) 2. ABSOLUTE MAXIMUM RATINGS VSS=0V ITEM SYMBOL MIN MAX UNIT Power Supply for Logic VDD-VSS -0.3 6.5 V Power Supply for LCD Drive VEE-VSS 0 42.0 V Input Voltage VI -0.3 VDD+0.3 V Static Electricity - - - - COMMENT Note 1 Note 1 LCM should be grounded during handling LCM. PAGE 1 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 3. ELECTRICAL CHARACTERISTICS 3.1 ELECTRICAL CHARACTERISTICS OF LCM ITEM Logic Circuit Power Supply SYMBOL CONDITION VDD-VSS Ta= 25˚C MIN. TYP. MAX. UNIT 4.5 5.0 5.5 V VIH H level 0.8VDD - VDD V VIL L level 0 - 0.2VDD V 0˚C - 24.1 24.2 25˚C 23.3 23.5 23.6 50˚C 22.6 22.8 23.0 - 18.8 28.5 - 8.0 Input Voltage Recommended LCD Driving Voltage (Normal Temp. LCM) Supply Current for Logic Duty=1/240 Bias=1/13 VEE-VSS V VDD=5.0V IDD mA VDD-VSS = 5.0V VEE-VSS = 23.5V Supply Current for LCD Ta= 25˚C IEE 12.5 mA 3.2 ELECTRICAL CHARACTERISTICS OF BACKLIGHT Used lamp : Rating PARAMETER MIN. SYMBOL TYP. MAX. UNIT REMARK Lamp Voltage VL - 535 Vrms - Lamp current I L 4 5 6 mArms (*1) Lamp power consumption PL - 2.7 - W (*2) Lamp frequcncy FL - 35 - kHz VS - - 600 Vrms Starting voltage X 0.27 0.29 0.31 Y 0.27 0.29 0.31 Brightness B 22000 - - cd/m Lamp life time LL 10000 - - hrs Ta=25˚C - Color Cooridinates 2 (*1) It is recommended that I be not more than 5.0 mArms so that heat radiation of L CCFT backlight may least affect the display quality . (*2) Power consumption excludes inverter loss . LCM : Rating PARAMETER SYMBOL MIN. TYP. MAX. Surface Luminance L - 76 - Luminance Uniformity Lu - 85 - REMARK UNIT cd/m % 2 White PAGE 2 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 4.OPTICAL CHARACTERISTICS 4-1 Optical Characteristics of Normal Temp. Mode AT VOP ITEM 0 (Viewing Angle) Cr(Contrast Ratio) 25˚C MODE T T: G: G 0 (Viewing Angle) 25˚C 25˚C MIN. TYP. 15 30 MIN. MIN. TYP. TYP. 50 45 TRANSMISSIVE NORMALLY BLACK AT ITEM Response Time (rise) Response Time (fall) SYMBOL Tr Tf CONDITION MIN. TYP. MAX. 0˚C - 210 400 25˚C - 150 280 50˚C - 100 200 0˚C - 250 500 25˚C - 170 340 50˚C - 120 240 0 = 0˚ 0 = 0˚ UNIT NOTE ms NOTE 2 ms NOTE 2 PAGE 3 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 5.BLOCK DIAGRAM FLM CL1 CL2 DISPOFF Buffer UD0~UD7 IC11 240 IC12 240 IC17 240 IC18 240 M Generator IC1 120 COLOR LCD PANEL IC2 120 IC3 120 1920 (640 X R.G.B) X 480 Dots IC4 120 VDD VSS VEE LD0~LD7 Bias Voltage Generator 240 IC19 240 IC20 240 IC25 240 IC26 Buffer PAGE 4 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 6.INTERFACE PIN CONNECTION CN3:30PIN JAE/IL-402-30S-S1L-SA INTERFACE PIN NO. SYMBOL 1 FLM 2 3 4 LCM CN3 CN1:15PIN MOLEX 53261-1590 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 CN2:14PIN MOLEX 53261-1490 FUNCTION PIN NO. The FLM signal indicates the beging of each display cycle. 1 NC DISPOFF H ---display ON, L --display OFF CL1 The CL1 latches the serial data in the shift registers. VSS GND CL2 Clock signal for shifting the serial data. VSS GND UD0 Display data for upper column driver UD1 Display data for upper column driver UD2 Display data for upper column driver UD3 Display data for upper column driver UD4 Display data for upper column driver UD5 Display data for upper column driver UD6 Display data for upper column driver UD7 Display data for upper column driver LD0 Display data for lower column driver LD1 Display data for lower column driver LD2 Display data for lower column driver LD3 Display data for lower column driver LD4 Display data for lower column driver LD5 Display data for lower column driver LD6 Display data for lower column driver LD7 Display data for lower column driver +5V VDD GND VSS GND VSS Power supply voltage for LCD (+) VEE Power supply voltage for LCD (+) VEE VEE Power supply voltage for LCD (+) NC 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CN1 CN2 FLCN1:MITSUMI/M63M83-04 (Suitable Connecter:MITSUMI/M60-04-30-134P or M60-04-30-114P or M61M73-04) INTERFACE CFL FLCN1 PIN NO. SYMBOL 1 2 3 4 GND N.C N.C HV FUNCTION CFL GND Power supply voltage for CFL PAGE 5 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 7.POWER SUPPLY VEE(+30V) R1 Tr LCM VR VEE R2 C1 VSS(0V) VSS C2 VDD VDD(+3V~+5V) R1+R2+VR=10~20K C1,C2=10uF PAGE 6 OF 8 AZ DISPLAYS, INC. Complete LCD Solutions 8.TIMING CHARACTERISTICS 8-1.INTERFACE TIMING VDD=5.0V ± 10% SYMBOL MIN. MAX. UNIT CLOCK PULSE CYCLE TIME t WCK 50 - ns CLOCK PULSE HIGH LEVEL WIDTH t WCKH 15 - ns CLOCK PULSE LOW LEVEL WIDTH t WCKL 15 - ns LATCH PULSE HIGH LEVEL WIDTH t WLPH 20 - ns CP LP RISE TIME t LD 0 - ns CP LP FALL TIME t SL 25 - ns LP CP RISE TIME t LS 25 - ns LP CP FALL TIME t LH 25 - ns CLOCK PULSE RISE/FALL TIME t r,t f - 30 ns DATA SETUP TIME t DS 10 - ns DATA HOLD TIME t DH 10 - ns FLM SETUP TIME t SU 100 - ns FLM HOLD TIME tH 30 - ns Parameter t WLPH CL1 t SL t LD t LH t LS CL2 tr tWCKL tWCKH tf t DS t WCK tDH UD0~UD7 LD0~LD7 tSU tH FLM PAGE 7 OF 8