AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: REVISED: AGM1264H Series MAY 14, 2003 Record of Revisions 5/14/2003 1 1/8 Part Number change from AGM1264J to AGM1264H 1.0 MECHANICAL SPECIFICATIONS ITEM STANDARD VALUE UNIT 128X64 DOTS - 0.48X0.48 mm 77.5(W) × 51.3(H) × 2.8(T) mm 70.7(W) × 38.8(H) mm 30 G DOTS DOT SIZE MODULE DIMENSION VIEWING AREA APPROX. WEIGHT LCD TYPE FSTN (Positive / Transflective ) DUTY, BIAS 1/64, 1/9 VIEWING DIRECTION 12 O’clock 2.0 ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. TYP. MAX. UNIT OPERATING TEMPERATURE Top -20 25 70 C STORAGE TEMPERATURE Tst -20 80 C INPUT VOLTAGE VI VSS VDD V SUPPLY VOLTAGE FOR LOGIC VDD-VSS VSS-0.3 - 5.5 V SUPPLY VOLTAGE FOR LCD VDD-V0 VSS-0.3 9.2 18.0 V STATIC ELECTRICITY Be certain you are grounded when handing LCM Page 1 3.0 ELECTRICAL CHARACTERISTICS 3.1 DC Characteristics Items Power Supply Voltage Input Voltage Output Voltage Supply Current Symbol Condition Ta=0~45 C ,VDD=2.7~5.5V, VSS=0V Standard Value Unit Min. Typ. Max. VDD -VSS 1.8 VDD -V0 VIH VIL VOH VOL IOH= -0.5mA IOL= 0.5mA 8.7 0.8*VDD VSS 0.8*VDD VSS IDD VDD = 3.3V - 3.0 or 5.0 9.2 - VDD 0.2*VDD V 1.6 2.4 mA 5.5 V 9.7 VDD 0.2*VDD V V 3.2 AC Characteristics (1) System bus Read/Write characteristics (For the 8080 Series MPU,VDD= 2.7~ 4.5V) Page 2 Symbol TAH8 TAS8 TCYC8 TCCLW TCCLR TCCHW TCCHR TDS8 TDH8 TACC8 TCH8 Parameter Address hold time Address setup time System cycle time Control L pulse width(WR) Control L pulse width(RD) Control H pulse width(WR) Control H pulse width(RD) Data setup time Data hold time RD access time Output disable time Min. 0 0 300 60 120 60 60 40 15 Typ. Max. 140 100 10 Unit ns ns ns ns ns ns ns ns ns ns ns Condition A0 A0 /WR /RD /WR /RD D0 T0 D7 D0 T0 D7 CL=100pF CL=100pF (2) System bus Read/Write characteristics (For the 6800 Series MPU, VDD= 2.7~4.5V) Symbol TCYC6 TAS6 TAH6 TDS6 TDH6 TOH6 TACC6 TEWHR TEWHW TEWLR TEWLW Parameter System cycle time Address setup time Address hold time Data setup time Data hold time Output disable time Access time Enable H width(Read) Enable H Enable L width(Read) Enable L width(Write) Min. 300 0 0 40 15 10 pulse pulse pulse pulse Typ. Max. 100 140 Unit ns ns ns ns ns ns ns 120 ns 60 ns 60 ns 60 ns Condition A0 A0 D0 T0 D7 D0 T0 D7 CL=100pF CL=100pF Page 3 (3) Display control timing Symbol TDFR Parameter Min. FR delay time Typ. 20 Max. 80 Unit ns Condition CL=50pF (4) Reset timing Symbol TR TW Parameter Min. Reset time Reset low pulse width 1.0 Typ. Max. 1.0 Unit us us Condition Page 4 4.0 OPTICAL CHARACTERISTICS ITEM Viewing Angle Contrast radio (Max) SYMBOL CONDITION MIN. TYP. (B-F) Cr>6.0 Ta=25 C -50 - 30 DEG -40 - 40 DEG - 9.0 - - - 250 ms - - 268 ms (R-L) Cr(Max) Response Time(Rise) Ton Response Time(Fall) Toff =0 =0 =0 =0 Vlcd=9.2V Ta=25C MAX. UNIT 5.0 INTERFACE PIN NO. 1 2 3 4 5 6 7 8 9 10 SYMBOL V5 V4 V3 V2 V1 NC CAP2+ CAP2CAP1CAP1+ PIN NO. 11 12 13 14 15 16 17 18 19 20 SYMBOL VOUT VSS VDD D7(SI) D6(SCL) /RD /WR A0 /RES /CS1 Page 5 (Seiko-Epson) Unless otherwise specified, tolerance is +/-0.2mm AZ DISPLAYS, INC. AGM1264H