TI LM317KTER

LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
D
D
D
D
D
D
Output Voltage Range Adjustable From
1.2 V to 37 V
Output Current Greater Than 1.5 A
Internal Short-Circuit Current Limiting
Thermal Overload Protection
Output Safe-Area Compensation
Package Options Include Plastic
Small-Outline Transistor SOT-223 (DCY),
Flange Mounted (KTE) and Heat-Sink
Mounted (KC) Packages
KC PACKAGE
(TOP VIEW)
INPUT
OUTPUT
ADJUST
The OUTPUT terminal is in electrical
contact with the mounting base.
TO-220AB
IO
A
description
The LM317 is an adjustable three-terminal
positive-voltage regulator capable of supplying
more than 1.5 A over an output-voltage range of
1.2 V to 37 V. It is exceptionally easy to use and
requires only two external resistors to set the
output voltage. Furthermore, both line and load
regulation are better than standard fixed
regulators. The LM317 is packaged in the KC
(TO-220AB) and KTE packages, which are easy
to handle and use.
In addition to having higher performance than
fixed regulators, this device includes on-chip
current limiting, thermal overload protection, and
safe-operating-area protection. All overload
protection remains fully functional, even if the
ADJUST terminal is disconnected.
KTE PACKAGE
(TOP VIEW)
INPUT
OUTPUT
ADJUST
The OUTPUT terminal is in electrical
contact with the mounting base.
I
The LM317 is versatile in its applications,
including uses in programmable output regulation
and local on-card regulation. Or, by connecting a
fixed resistor between the ADJUST and OUTPUT
terminals, the LM317 can function as a precision
current regulator. An optional output capacitor can
be added to improve transient response. The
ADJUST terminal can be bypassed to achieve
very high ripple-rejection ratios, which are difficult
to achieve with standard three-terminal
regulators.
O
A
DCY PACKAGE
(TOP VIEW)
INPUT
OUTPUT
The LM317 is characterized for operation over the
virtual junction temperature range of 0°C to
125°C.
ADJUST
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
AVAILABLE OPTIONS
PACKAGED DEVICES
TJ
HEAT-SINK
(DCY)†
HEAT-SINK
MOUNTED, TO-220
(KC)
PLASTIC FLANGE
MOUNTED, POWER FLEX
(KTE)‡
0°C to 125°C
LM317DCY
LM317KC
LM317KTER
† The DCY package also is available taped and reeled, e.g., LM317DCYR.
‡ The KTE package has the same footprint as TO-263 and can be mounted on a TO-263
land pattern. The KTE package is only available taped and reeled.
schematic diagram
INPUT
OUTPUT
ADJUST
absolute maximum ratings over virtual junction temperature range (unless otherwise noted)§
Input-to-output differential voltage, VI – VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Package thermal impedance, θJA (see Notes 1 and 2): DCY package . . . . . . . . . . . . . . . . . . . . . . . . . 49°C/W
(see Notes 1 and 3): KC package . . . . . . . . . . . . . . . . . . . . . . . . . . . 25°C/W
(see Notes 1 and 2): KTE package . . . . . . . . . . . . . . . . . . . . . . . . . 23°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
§ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
2. The package thermal impedance is calculated in accordance with JESD 51-5.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
2
VI – VO
IO
Input-to-output voltage differential
TJ
Operating virtual junction temperature
MIN
MAX
3
37
1.5
A
0
125
°C
Output current
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
V
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
electrical characteristics over recommended ranges of operating virtual junction temperature
(unless otherwise noted)
TEST CONDITIONS†
PARAMETER
Input voltage (line) regulation‡
Output voltage
g
(load) regulation
Thermal regulation
VI – VO = 3 V to 40 V
IO = 10 mA to 1500 mA
20-ms pulse,
MIN
TJ = 25°C
TJ = 0°C to 125°C
TYP
MAX
0.01
0.04
0.02
0.07
25
mV
0.5
%VO
mV
VO ≤ 5 V
VO ≥ 5 V
0.1
TJ = 0°C to 125°C
VO ≤ 5 V
VO ≥ 5 V
20
70
0.3
1.5
0.03
0.07
%VO
%VO/W
50
100
µA
0.2
5
µA
1.25
1.3
V
TJ = 25°C
Change in
ADJUST terminal current
VI – VO = 2.5 V to 40 V, PD ≤ 20 W, IO = 10 mA to 1500 mA
Reference voltage (Vref)
(OUTPUT to ADJUST)
VI – VO = 3 V to 40 V, PD ≤ 20 W, IO = 10 mA to 1500 mA
Output-voltage
temperature stability
TJ = 0°C to 125°C
0.7
Minimum load current
to maintain regulation
VI – VO = 40 V
3.5
Peak output current
VI – VO ≤ 15 V,
PD < PMAX (see Note 1)
VI – VO ≤ 40 V, PD < PMAX (see Note 1), TJ = 25°C
Output noise voltage (RMS)
f = 10 HZ to 10 kHZ,
VO = 10 V,
V
%/V
CADJ = 10 µF
µ §,
TJ = 25°C
ADJUST terminal current
Ripple rejection
UNIT
1.2
1.5
2.2
0.15
0.4
TJ = 25°C
f = 120 HZ
0.003
CADJ = 0 µF§
CADJ = 10 µF§
57
62
64
%VO
10
mA
A
%VO
dB
Long-term stability
TJ = 25°C
0.3
1 %/1k Hrs
† Unless otherwise noted, the following test conditions apply: |VI – VO| = 5 V and IOMAX = 1.5 A, TJ = 0°C to 125°C. Pulse testing techniques are
used to maintain the junction temperature as close to the ambient temperature as possible.
‡ Input regulation is expressed here as the percentage change in output voltage per 1-V change at the input.
§ CADJ is connected between the ADJUST terminal and GND.
NOTE 4: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
LM317
VI
VO
OUTPUT
INPUT
ADJUST
R1
240 Ω
Cin (Note A)
0.1 µF
Vref = 1.25 V
IAdj
CO (Note B)
1.0 µF
R2
NOTES: A. Cin is not required if the regulator is close enough to the power-supply filter.
B. CO improves transient response, but is not needed for stability.
Vout is calculated as:
V out
+V
ref
ǒ ) Ǔ)
1
R2
R1
(I Adj
R2)
Since IAdj is typically 50 µA, it is negligible in most applications.
Figure 1. Adjustable Voltage Regulator
LM317
+35 V
VO
OUTPUT
INPUT
ADJUST
R1
120 Ω
–10 V
C1
0.1 µF
ǒ)
Vout is calculated as:
V out
+V
ref
1
R2
Ǔ
) R3 ) I
R1
Adj(R2
R3
680 Ω
R2
3 kΩ
) R3) – 10 V
Since IAdj is typically 50 µA, it is negligible in most applications.
Figure 2. 0-V to 30-V Regulator Circuit
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
LM317
VI
INPUT
VO
OUTPUT
ADJUST
R1
240 Ω
D1
1N4002
(see Note A)
C1
0.1 µF
C3
1 µF
R2
5 kΩ
C2
10 µF
NOTE A: D1 discharges C2 if the output is shorted to ground.
Figure 3. Adjustable Regulator Circuit With Improved Ripple Rejection
LM317
VI
INPUT
I limit
OUTPUT
R1
ADJUST
+ 1.2
R1
Figure 4. Precision Current-Limiter Circuit
R2
720 Ω
ADJUST
VI
INPUT
R1
240 Ω
OUTPUT
LM317
LM317
OUTPUT
INPUT
R3
120 Ω
ADJUST
C1
0.1 µF
VO
C2
1 µF
Output
Adjust
R4
1 kΩ
Figure 5. Tracking Preregulator Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
LM317
OUTPUT
INPUT
VI
ADJUST
VO
R1
1.2 kΩ
R2
20 kΩ
Figure 6. 1.2-V to 20-V Regulator Circuit With Minimum Program Current
LM317
VI
INPUT
LM317
VO†
OUTPUT
INPUT
VI
R1
120 Ω
ADJUST
OUTPUT
LM317
VO†
VI
ADJUST
INPUT
OUTPUT
ADJUST
R2
1 kΩ
† Minimum load current from each output is 10 mA. All output voltages are within 200 mV of each other.
Figure 7. Adjusting Multiple On-Card Regulators With a Single Control
LM317
VI
INPUT
RS
0.2 Ω
(see Note A)
OUTPUT
R1
240 Ω
ADJUST
R2
2.4 kΩ
ǒ) Ǔ
NOTE A: RS controls the output impedance of the charger.
Z OUT
R S 1 R2
R1
The use of RS allows for low charging rates with a fully charged battery.
+
Figure 8. Battery-Charger Circuit
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
VO†
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
LM317
VI
INPUT
24 Ω
OUTPUT
ADJUST
Figure 9. 50-mA Constant-Current Battery-Charger Circuit
LM317
VI
INPUT
OUTPUT
VO = 15 V
R1
240 Ω
ADJUST
D1
1N4002
R3
50 kΩ
R2
2.7 kΩ
2N2905
C1
25 µF
Figure 10. Slow Turn-On 15-V Regulator Circuit
LM317
VI
INPUT
OUTPUT
ADJUST
480 Ω
12 VI(PP)
ADJUST
VI
INPUT
120 Ω
120 Ω
480 Ω
6 VO(PP)
2 W (TYP)
OUTPUT
LM317
Figure 11. AC Voltage-Regulator Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
LM317
VI+
INPUT
OUTPUT
ADJUST
R1
240 Ω
R2
1.1 kΩ
R3
(see Note A)
VI–
NOTE A: R3 sets the peak current (0.6 A for a 1-Ω resistor).
Figure 12. Current-Limited 6-V Charger Circuit
LM317
VI
INPUT
0.2 Ω
OUTPUT
ADJUST
LM317
INPUT
0.2 Ω
OUTPUT
ADJUST
4.5 V to 25 V
LM317
INPUT
0.2 Ω
OUTPUT
ADJUST
5 kΩ
100 Ω
5 kΩ
_
TL080
+
2N2905
150 Ω
200 pF
1.5 kΩ
Figure 13. Adjustable 4-A Regulator Circuit
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LM317
3-TERMINAL ADJUSTABLE REGULATOR
SLVS044H – SEPTEMBER 1997 – REVISED DECEMBER 2001
APPLICATION INFORMATION
TIP73
2N2905
VI
500 Ω
5 kΩ
22 Ω
LM317
INPUT
VO
OUTPUT
ADJUST
120 Ω
1N4002
10 µF
10 µF
(see Note B)
See
Note A
47 µF
NOTES: A. The minimum load current is 30 mA.
B. This optional capacitor improves ripple rejection.
Figure 14. High-Current Adjustable Regulator Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright  2001, Texas Instruments Incorporated