CE RS1A THRU RS1K CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 800 Volts Forward Current - 1.0Ampere FEATURES . For surface mounted applications . Low profile package . Built-in strain relief , ideal for automated placement . Fast switching speed . Plastic package has Underwrites Laboratory Flammability Classification 94V-0 . Glass passivated chip junction . High temperature soldering guaranteed: 250 /10 seconds, at terminals MECHANICAL DATA . Case: JEDEC SMA(DO-214AC) molded plastic . Terminals: Plated axial leads,solderable per MIL-STD-750,method 2026 . Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) . Weight: 0.002 ounce, 0.064 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive) load. For capacitive load,derate current by 20%) Symbols RS1A RS1B RS1D RS1G RS1J RS1K Units Maximum Recurrent peak reverse voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 Volts VDC 50 100 200 400 600 800 Volts Maximum DC blocking voltage Maximum average forward I(AV) 1.0 Amp IFSM 30.0 Amps VF 1.30 Volts current of TL=90 Peak forward surge current (8.3ms single half sing wave superimposed on rated load (JEDEC method) at TL=90 Maximum instantaneous forward voltage at 1.0 A Maximum reverse recovery time(Note 1) TA=25 current at rated DC Blocking Voltage TA=125 5.0 IR R Typical Thermal Resistance( Note 3) R Typical reverse recovery time(Note 2) A 50 JL JA Trr TJ TSTG Operating and storage temperature range 27.0 30.0 25.0 85.0 /W 150.0 250 500 nS -55 to +150 Notes: 1.Test conditions:IF=0.5A,IR=1.0A,Irr=0.25A. 2.Measured at 1MHz and applied reverse voltage of 4.0 Volts. 3.Thermal resistance from junction to ambient and from junction to lead mounted on PCB mounted on 0.2 X 0.2"(5.0 X 5.0mm) copper pad areas. Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE RS1A THRU RS1K CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 800 Volts Forward Current - 1.0Ampere RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1K FLG.1-FORWARD CURRENT FIG.2-MAXIMUM NON-REPETITIVE DERATING CURVE FORWARD SURGE CURRENT FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL JUNCTION CAPACITANCE FIG.2-TYPICAL REVERSE CHARACTERISTICS FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2