CLARE CPC1230N

CPC1230N
4 Pin SOP OptoMOS® Relay
Load Voltage
Load Current
Max RON
CPC1230
350
120
30
Description
The CPC1230N is a miniature 1-Form-A solid state relay
in a 4 pin SOP package that employs optically coupled
MOSFET technology to provide 1500V of input to output
isolation and is BSI certified for supplemental insulation in
accordance with EN60950. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS®
architecture. The optically coupled input is controlled by a
highly efficient GaAIAs infrared LED. The CPC1230N
uses Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest 4 pin
relay. The CPC1230N offers board space savings of at
least 20% over the competitor’s larger 4 pin SOP relay.
Units
V
mA
Ω
Features
• Small 4 Pin SOP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• Supplemental Isolation
• FCC Compatible
• 1500VRMS Input/Output Isolation
• 0.4mm Distance Through Insulation
• FCC Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Version Available
Approvals
• UL/C-UL Recognized Component
File #: E76270
• BSI Certified - Certificate #: 8416
(Supplementary Isolation Requirement of EN60950)
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
Description
CPC1230N
4 Pin SOP (100/tube)
CPC1230NTR 4 Pin SOP (2,000/reel)
Pin Configuration
CPC1030N Pinout
+ Control
Ð Control
1
4
2
3
Load
Load
Switching Characteristics of
Normally Open (Form A) Devices
10ms
CONTROL
LOAD 10%+
+90%
TON
DS-CPC1230N-R2
www.clare.com
10%+
TOFF
1
CPC1230N
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Input Power Dissipation
Input Control Current
Peak (10ms)
Reverse Input Voltage
Total Power Dissipation
Capacitance
Input to Output
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
(10 Seconds Max.)
1
Derate Linearly 1.33 mw / oC
2
Derate Linearly 6.67 mw / oC
Min
-
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Typ Max Units
- 1501 mW
50
mA
1
A
5
V
- 4002 mW
-
1
1500
-40
-40
-
-
-
pF
VRMS
+85
°C
+125 °C
+220 °C
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Voltage (Peak)
Load Current (Continuous)
AC Peak 1
Peak Load Current
On-Resistance2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Voltage
Reverse Input Current
2
Conditions
Symbol
Min
Typ
Max
Units
-
VL
-
-
350
V
10ms
IL=120mA
VL=350V
IL
ILPK
RON
ILEAK
-
25
-
120
350
30
1
mA
mA
Ω
µA
IF=5mA, VL=10V
IF=5mA, VL=10V
50V; f=1MHz
TON
TOFF
COUT
-
25
2
1.0
-
ms
ms
pF
IL=120mA
IF=5mA
VR=5V
IF
IF
VF
VR
IR
2
0.3
0.9
-
0.9
1.2
-
50
1.4
5
10
mA
mA
V
V
µA
1
Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC.
2
Measurement taken within 1 second of on time.
3
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recomended.
www.clare.com
Rev. 2
CPC1230N
PERFORMANCE DATA*
CPC1230N
Typical On-Resistance Distribution
(Ambient Temperature = 25 C)
(Load Current = 120mA)
CPC1230N
Typical LED Forward Voltage Drop
(Ambient Temperature = 25 C)
IF = 5mADC
o
35
35
30
30
30
25
20
15
10
25
20
15
10
5
5
0
0
1.17
1.19
1.21
1.23
Device Count (N)
35
Device Count (N)
Device Count (N)
o
20
15
10
0
24
24.5
25
25.5
26
o
20
10
15
10
5
5
0
0
0.75
0.80
0.85
Device Count (N)
25
20
Device Count (N)
25
15
395
400
15
10
0
0.70
0.75
0.80
0.85
0.90
0.95
0.85
0.90
1.00
LED Current (mA)
LED Current (mA)
CPC1230N
Typical Turn-Off Time
(Ambient Temperature = 25 C)
(Load Current = 120mA; IF = 5mA)
390
5
0.65
0.90
385
o
20
0.70
380
CPC1230N
Typical Turn-On Time
(Ambient Temperature = 25 C)
(Load Current = 120mA; IF = 5mA)
o
25
0.65
375
Blocking Voltage (V)
CPC1230N
Typical IF for Switch Dropout
(Ambient Temperature = 25 C)
(Load Current = 120mA)
CPC1230N
Typical IF for Switch Operation
(Ambient Temperature = 25 C)
(Load Current = 120mA)
0.60
370
26.5
On-Resistance (Ω)
LED Forward Voltage Drop (V)
Device Count (N)
25
5
23.5
1.25
CPC1230N
Typical Blocking Voltage Distribution
(Ambient Temperature = 25oC)
1.10
1.15
1.20
1.25
Turn-On (ms)
o
CPC1230N
Typical Load Current vs. Temperature
10
5
0
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.014
IF = 10mA
IF = 5mA
Turn-On (ms)
Blocking Voltage (VRMS)
400
395
390
385
380
375
370
365
-40
-20
0
20
40
60
Temperature (oC)
80
100
5.000
4.500
4.000
3.500
3.000
2.500
2.000
1.500
1.000
0.500
0
-40
0.010
0.008
0.006
0.004
20
40
60
Temperature (oC)
80 100 120
0
-40
5mA
10mA
0
20
40
-20
0
20
40
60
80
100
Temperature (oC)
CPC1230N
Typical Turn-On vs. Temperature
(Load Current = 80mA)
-20
0.012
0.002
0
Turn-Off (ms)
CPC1230N
Typical Blocking Voltage
vs. Temperature
CPC1230N
Typical Leakage vs. Temperature
(Measured across Pins 3 & 4) IL = max rated
0.016
Leakage (µA)
15
180
160
140
120
100
80
60
40
20
0
-40 -20
60
Temperature (o C)
80
100
Turn-Off (ms)
20
Load Current (mA)
Device Count (N)
25
1.000
0.900
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
0
-40
CPC1230N
Typical Turn-Off vs. Temperature
(Load Current = 80mA)
10mA
-20
0
20
40
60
Temperature (oC)
80
5mA
100
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 2
www.clare.com
3
CPC1230N
PERFORMANCE DATA*
CPC1230N
Typical Turn-On vs. LED Forward Current
(Load Current = 120mA)
1.6
1.4
50mA
30mA
20mA
10mA
5mA
1.2
1.0
0.8
-40
-20
0
20
40
60
80
100
120
LED Forward Current (mA)
CPC1230N
Typical IF for Switch Operation
vs. Temperature
(Load Current = 80mA)
CPC1230N
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 80mA)
3.000
60
3.000
2.500
40
30
20
2.500
LED Current (mA)
LED Current (mA)
50
2.000
1.500
1.000
0.500
10
-20
0
20
40
60
80
Load Current (A)
100
50
0
-50
-100
-2
-1
0
1
Load Voltage (V)
2
3
1.000
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Temperature (oC)
CPC1230N
Energy Rating Curve
150
-3
0
Temperature ( C)
CPC1230N
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25oC)
IF = 5mA
-150
-20
o
Temperature ( C)
1.500
0
-40
100
o
2.000
0.500
0
0
-40
5 10 15 20 25 30 35 40 45 50
LED Forward Current (mA)
CPC1230N
Typical On-Resistance vs. Temperature
(Load Current = 80mA; IF = 10mA)
On-Resistance (Ω)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
5 10 15 20 25 30 35 40 45 50
Temperature (oC)
Load Current (mA)
CPC1030N
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mA)
Turn-Off (ms)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1.8
Turn-On (ms)
LED Forward Voltage Drop (V)
CPC1230N
Typical LED Forward Voltage Drop
vs. Temperature
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10µs 100µs 1ms 10ms 100ms 1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
4
www.clare.com
Rev. 2
CPC1230N
Mechanical Dimensions
.38 TYP.
(.015 TYP.)
4 Pin SOIC Narrow (“N” Suffix)
6.09 ± .25
(.240 ± .010)
3.81 ± .13
(.150 ± .005)
.38 x 45
(.015 x 45 )
1.01 ± .025
(.040 ± .001)
4.09 ± 0.20
(0.161 ± 0.008)
2.18 MAX.
(.086)
0.432 ± 0.127
(.017 ± .005)
.20 ± .025
(.008 ± .001)
2.54 TYP.
(.100 TYP.)
PC Board Pattern
(Top View)
2.54 ± 0.127
(0.100 ± 0.005)
5.66 ± 0.14
(0.223 ± 0.005)
1.448
(0.057)
0.889
(0.035)
Dimensions
mm
(inches)
Rev. 2
www.clare.com
5
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-CPC1230N-R2
©Copyright 2000, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
1/12/01