HSM101 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS HSM106 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES * * * * ldeal for surface mounted applications Low leakage current Fast switching for high efficiency Glass passivated junction SM-1(DO-213AB) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.12 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL HSM101 HSM102 HSM103 HSM104 HSM105 HSM106 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 Volts Maximum RMS Volts VRMS 35 70 140 210 280 420 Volts VDC 50 100 200 300 400 600 Volts Maximum DC Blocking Voltage Maximum Average Forward Current at T A = 50 oC IO Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A =125 o C I FSM VF Amps 30 Amps 1.0 1.3 1.7 5.0 IR Volts uAmps 100 Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ Operating and Storage Temperature Range 1.0 T J , T STG 50 75 nSec 15 pF -65 to + 175 0 C NOTES : 1. Test Conditions: IF=0.5A, I R=1.0A, IRR=0.25A. 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 286 NEXT BACK NEXT EXIT BACK RATING AND CHARACTERISTIC CURVES ( HSM101 THRU HSM106 ) DC COMPONENTS CO., LTD. R 287 NEXT NEXT BACK BACK EXIT EXIT