TI TS5A3153DCUR

W www.ti.com
SCDS215 – OCTOBER 2005
Description
The TS5A3153 is a single-pole double-throw (SPDT)
analog switch that is designed to operate from 1.65 V
to 5.5 V. The device offers a low ON-state resistance
and an excellent on-resistance matching with the
break-before-make feature, to prevent signal distortion
during the transferring of a signal from one channel to
another. The device has an excellent total harmonic
distortion (THD) performance and consumes very low
power. These features make this device suitable for
portable audio applications.
Features
D Isolation in the Powered-Off Mode, V+ = 0
D Specified Break-Before-Make Switching
D Low ON-State Resistance (1 W)
D Control Inputs Are 5.5-V Tolerant
D Low Charge Injection
D Excellent ON-State Resistance Matching
D Low Total Harmonic Distortion (THD)
D 1.65-V to 5.5-V Single-Supply Operation
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Performance Tested Per JESD 22
Applications
D
D
D
D
D
D
D
D
D
D
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
Cell Phones
PDAs
Portable Instrumentation
Audio and Video Signal Routing
Low-Voltage Data Acquisition System
Communication Circuits
Summary of Characteristics
V+ = 5 V, TA = 25°C
2:1 Multiplexer/
Demultiplexer
(SPDT)
Configuration
Modems
Number of channels
Hard Drives
1
1.1 Ω
ON-state resistance (ron)
Computer Peripherals
Wireless Terminals and Peripherals
ON-state resistance match (∆ron)
0.1 Ω
ON-state resistance flatness (ron(flat))
0.15 Ω
Turn-on/turn-off time (tON/tOFF)
SSOP OR VSSOP PACKAGE
(TOP VIEW)
20 ns/15 ns
Break-before-make time (tBBM)
12 ns
Charge injection (QC)
36 pC
Bandwidth (BW)
100 MHz
COM 1
8
V+
OFF isolation (OISO)
−65 dB at 1 MHz
EN 2
7
NC
Crosstalk (XTALK)
−66 dB at 1 MHz
6
NO
Total harmonic distortion (THD)
0.01%
IN
Leakage current(ICOM(OFF)/INO(OFF))
±20 nA
GND 3
Logic
Control
GND 4
5
0.1 µA
Power-supply current (I+)
Package option
YEA, YEP, YZA, OR YZP PACKAGE
(BOTTOM VIEW)
8-pin SSOP, VSSOP, or
DSBGA
FUNCTION TABLE
5
IN
EN
IN
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
3
6
NO
L
L
ON
OFF
EN
2
7
NC
L
H
OFF
ON
COM
1
8
V+
H
X
OFF
OFF
GND
4
GND
Logic
Control
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
!"#$ % &'!!($ #% )'*+&#$ ,#$( !,'&$%
&!" $ %)(&&#$% )(! $-( $(!"% (.#% %$!'"($% %$#,#!, /#!!#$0
!,'&$ )!&(%%1 ,(% $ (&(%%#!+0 &+',( $(%$1 #++ )#!#"($(!%
Copyright  2005, Texas Instruments Incorporated
W www.ti.com
SCDS215 – OCTOBER 2005
ORDERING INFORMATION
PACKAGE(1)
TA
ORDERABLE PART NUMBER
NanoStar − WCSP (DSBGA)
0.17−mm Small Bump − YEA
NanoFree − WCSP (DSBGA)
0.17-mm Small Bump − YZA (Pb-free)
−40°C to 85°C
NanoStar − WCSP (DSBGA)
0.23-mm Large Bump − YEP
TOP-SIDE MARKING(2)
TS5A3153YEAR
PREVIEW
TS5A3153YZAR
PREVIEW
TS5A3153YEPR
PREVIEW
TS5A3153YZPR
PREVIEW
Tape and reel
NanoFree − WCSP (DSBGA)
0.23-mm Large Bump − YZP (Pb-free)
SSOP − DCT
Tape
TS5A3153DCT
PREVIEW
VSSOP − DCU
Tape and reel
TS5A3153DCUR
JCD
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
(2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character
to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
Absolute Minimum and Maximum Ratings(1)(2)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
V+
VNC
VNO
VCOM
IK
Supply voltage range(3)
−0.5
6.5
V
Analog voltage range(3)(4)(5)
−0.5
V+ + 0.5
V
INC
INO
ICOM
VI
On-state switch current
IIK
I+
Digital input clamp current
IGND
Continuous current through GND
θJA
Analog port diode current
On-state peak switch current(6)
VNC, VNO, VCOM < 0
VNC, VNO, VCOM = 0 to V+
Digital input voltage range(3)(4)
VI < 0
−50
mA
−200
200
−400
400
−0.5
6.5
mA
−50
Continuous current through V+
Package thermal impedance(7)
UNIT
−100
V
mA
100
mA
100
mA
DCT package
220
DCU package
227
YEA/YZA package
140
YEP/YZP package
102
°C/W
Tstg
Storage temperature range
−65
150
°C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified
is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) Pulse at 1 ms duration < 10% duty cycle
(7) The package thermal impedance is calculated in accordance with JESD 51-7.
2
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 5-V Supply(1)
V+ = 4.5 V to 5.5 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
0 ≤ (VNO or VNC) ≤ V+,
ICOM = −100 mA,
Switch ON,
See Figure 13
25 °C
VNO or VNC = 2.5 V,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
ron
VNO or VNC = 2.5 V,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
∆ron
0 ≤ (VNO or VNC) ≤ V+,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 1 V, 1.5 V, 2.5 V,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
VNC or VNO = 1 V, VCOM = 4.5 V,
or
VNC or VNO = 4.5 V, VCOM = 1 V,
Switch OFF,
See Figure 14
25°C
Switch OFF,
See Figure 14
25°C
Peak ON
resistance
rpeak
ON-state
resistance
ON-state
resistance match
between channels
ON-state
resistance flatness
NC, NO
OFF leakage
current
NC, NO
ON leakage
current
COM
OFF leakage
current
COM
ON leakage
current
0
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF), VNC or VNO = 0 to 5.5 V,
INO(PWROFF) VCOM = 5.5 V to 0,
Full
Full
0.9
1.1
0.05
4.5 V
Switch ON,
See Figure 14
25°C
Switch OFF,
See Figure 14
25°C
0.09
−20
2
Ω
0.15
Ω
20
nA
−150
−5
0V
25°C
150
0.7
−25
−20
5
25
2
Full
nA
−150
−20
150
2
20
5.5 V
Full
nA
−150
−5
0V
25°C
mA
A
20
5.5 V
Full
Ω
0.15
Full
VNC or VNO = 4.5 V, VCOM = 1 V,
or
VNC or VNO = 1 V, VCOM = 4.5 V,
Ω
0.15
5.5 V
Full
V
0.10
0.10
Full
ICOM(OFF)
Switch ON,
See Figure 15
0.8
4.5 V
Full
Switch ON,
See Figure 15
ICOM(ON)
1.1
1.3
Full
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 4.5 V,
VCOM = Open,
VNC or VNO = Open, VCOM = 1 V,
or
VNC or VNO = Open,
VCOM = 4.5 V,
0.9
4.5 V
4.5 V
INC(ON),
INO(ON)
VNC or VNO = 0 to 5.5 V,
ICOM(PWROFF)
VCOM = 5.5 V to 0,
V+
150
0.7
−25
−20
5
25
2
mA
A
20
5.5 V
nA
Full
−150
150
Full
2.4
5.5
V
0.8
V
Digital Control Inputs (IN, EN)(2)
Input logic high
Input logic low
Input leakage
current
VIH
VIL
IIH, IIL
VI = 5.5 V or 0
Full
0
25°C
−100
Full
5.5 V
−100
25
100
100
nA
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications
of Slow or Floating CMOS Inputs, literature number SCBA004.
3
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 5-V Supply(1) (continued)
V+ = 4.5 V to 5.5 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
12.5
MAX
UNIT
Dynamic
Turn-on time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
5V
1
tON
Full
4.5 V to 5.5 V
1
Turn-off time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
5V
tOFF
Full
4.5 V to 5.5 V
Break-beforemake time
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
5V
tBBM
Full
4.5 V to 5.5 V
See Figure 22
25°C
5V
12
pC
See Figure 16
25°C
5V
19
pF
2.5
8.5
2
1
16
17.5
15
18
7
0.5
ns
ns
12
15
ns
Charge injection
QC
NC, NO
OFF capacitance
CNC(OFF),
CNO(OFF)
VGEN = 0, RGEN = 0,
CL = 1 nF,
VNC or VNO = V+ or GND,
Switch OFF,
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
5V
57
pF
COM
OFF capacitance
CCOM(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
5V
36
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
5V
57
pF
VI = V+ or GND,
See Figure 16
25°C
5V
2
pF
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
5V
97
MHz
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
5V
−64
dB
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
5V
−64
dB
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to
20 kHz,
See Figure 23
25°C
5V
0.004
%
Digital input
capacitance
Bandwidth
OFF isolation
Crosstalk
Total harmonic
distortion
CI
Supply
25°C
Positive supply
Switch ON or
I+
VI = V+ or GND,
5.5 V
current
OFF
Full
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
4
0.02
0.10
0.50
µA
A
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 3.3-V Supply(1)
V+ = 3 V to 3.6 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance match
between channels
ON-state
resistance flatness
NC, NO
OFF leakage
current
NC, NO
ON leakage
current
COM
OFF leakage
current
COM
ON leakage
current
∆ron
ron(flat)
INO(OFF),
INC(OFF)
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = −100 mA,
Switch ON,
See Figure 13
25 °C
VNO or VNC = 2 V,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 2 V, 0.8 V
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
0 ≤ (VNO or VNC) ≤ V+,
ICOM = 100 mA,
Switch ON,
See Figure 13
VNO or VNC = 2 V, 0.8 V,
ICOM = 100 mA,
Switch ON,
See Figure 13
25°C
VNC or VNO = 1 V, VCOM = 3 V,
or
VNC or VNO = 3V, VCOM = 1 V,
Switch OFF,
See Figure 14
25°C
Switch OFF,
See Figure 14
25°C
INO(PWROFF), VNC or VNO = 0 to 3.6 V,
INC(PWROFF) VCOM = 3.6 V to 0,
Full
Full
1.2
3V
1.5
1.7
0.08
3V
0.09
0.15
−20
Full
VNC or VNO = 3 V, VCOM = 1 V,
or
VNC or VNO = 1 V, VCOM = 3 V,
Switch ON,
See Figure 14
25°C
ICOM(OFF)
Switch OFF,
See Figure 14
25°C
2
Switch ON,
See Figure 15
25°C
Ω
Ω
20
nA
−50
−1
0V
50
0.2
−15
−20
1
15
2
Full
nA
−50
−20
50
2
20
3.6 V
Full
nA
−50
−1
0V
mA
A
20
3.6 V
Full
Ω
0.15
3.6 V
25°C
Ω
0.2
Full
Full
V
0.15
0.15
25°C
Switch ON,
See Figure 15
VNC or VNO = Open, VCOM = 1 V,
or
VNC or VNO = Open, VCOM = 3 V,
1.6
1.8
Full
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 3 V, VCOM = Open,
ICOM(ON)
1.3
3V
3V
INC(ON),
INO(ON)
VNC or VNO = 3.6 to 0 V,
ICOM(PWROFF)
VCOM = 0 to 3.6 V,
V+
50
0.2
−15
−20
1
15
2
mA
A
20
3.6 V
nA
Full
−50
50
Full
2
5.5
V
Full
0
0.8
V
Digital Control Inputs (IN, EN)(2)
Input logic high
Input logic low
VIH
VIL
Input leakage
current
IIH, IIL
25°C
VI = 5.5 V or 0
Full
−100
3.6 V
−100
25
100
100
nA
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications
of Slow or Floating CMOS Inputs, literature number SCBA004.
5
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 3.3-V Supply(1) (continued)
V+ = 3 V to 3.6 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
17
22
UNIT
Dynamic
Turn-on time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
3.3 V
1
tON
Full
3 V to 3.6 V
1
Turn-off time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
3.3 V
tOFF
Full
3 V to 3.6 V
4
Break-beforemake time
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
3.3 V
2
tBBM
Full
3 V to 3.6 V
1
See Figure 22
25°C
3.3 V
8
pC
See Figure 16
25°C
3.3 V
19
pF
4.3
24
9.5
16
19
12
ns
ns
22
25
ns
Charge injection
QC
NC, NO
OFF capacitance
CNC(OFF),
CNO(OFF)
VGEN = 0, RGEN = 0,
CL = 1 nF,
VNC or VNO = V+ or GND,
Switch OFF,
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
3.3 V
57
pF
COM
OFF capacitance
CCOM(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
3.3 V
36
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
3.3 V
57
pF
VI = V+ or GND,
See Figure 16
25°C
3.3 V
2
pF
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
3.3 V
97
MHz
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
3.3 V
−64
dB
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
3.3 V
−64
dB
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20
kHz,
See Figure 23
25°C
3.3 V
0.010
%
Digital input
capacitance
Bandwidth
OFF isolation
Crosstalk
Total harmonic
distortion
CI
Supply
25°C
Positive supply
Switch ON or
I+
VI = V+ or GND,
3.6 V
current
OFF
Full
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
6
0.01
0.10
0.25
µA
A
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 2.5-V Supply(1)
V+ = 2.3 V to 2.7 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
0 ≤ (VNO or VNC) ≤ V+,
ICOM = −8 mA,
Switch ON,
See Figure 13
25 °C
VNO or VNC = 1.8 V,
ICOM = 8 mA,
Switch ON,
See Figure 13
25°C
ron
VNO or VNC = 0.8 V,
ICOM = 8 mA,
Switch ON,
See Figure 13
25°C
∆ron
0 ≤ (VNO or VNC) ≤ V+,
ICOM = 8 mA,
Switch ON,
See Figure 13
VNO or VNC = 0.8 V, 1.8 V,
ICOM = 8 mA,
Switch ON,
See Figure 13
25°C
VNC or VNO = 0.5 V, VCOM = 2.2 V,
or
VNC or VNO = 2.2 V, VCOM = 0.5 V,
Switch OFF,
See Figure 14
25°C
Switch OFF,
See Figure 14
25°C
Peak ON
resistance
rpeak
ON-state
resistance
ON-state
resistance match
between channels
ON-state
resistance flatness
NC, NO
OFF leakage
current
NC, NO
ON leakage
current
COM
OFF leakage
current
COM
ON leakage
current
0
ron(flat)
INO(OFF),
INC(OFF)
INO(PWROFF), VNC or VNO = 0 to 2.7 V,
INC(PWROFF) VCOM = 2.7 V to 0,
Full
Full
1.6
2.3 V
2.1
2.5
0.12
2.3 V
0.5
1
−20
Full
VNC or VNO = 2.2 V, VCOM = 0.5 V,
or
VNO = 0.5 V, VCOM = 2.2 V,
Switch ON,
See Figure 14
25°C
ICOM(OFF)
Switch OFF,
See Figure 14
25°C
2
Switch ON,
See Figure 15
25°C
Ω
Ω
20
nA
−50
−1
0V
50
0.1
−10
−20
1
10
2
Full
nA
−50
−20
50
2
20
2.7 V
Full
nA
−50
−1
0V
mA
A
20
2.7 V
Full
Ω
1
2.7 V
25°C
Ω
0.65
Full
Full
V
0.2
0.2
25°C
Switch ON,
See Figure 15
VNC or VNO = Open, VCOM = 0.5 V,
or
VNC or VNO = Open, VCOM = 2.2 V,
2.5
2.7
Full
VNC or VNO = 0.5 V, VCOM = Open,
or
VNC or VNO = 2.2 V, VCOM = Open,
ICOM(ON)
1.9
2.3 V
2.3 V
INC(ON),
INO(ON)
VNC or VNO = 2.7 V to 0,
ICOM(PWROFF)
VCOM = 0 to 2.7 V,
V+
50
0.1
−10
−20
1
10
2
mA
A
20
2.7 V
nA
Full
−50
50
Full
1.8
5.5
V
Full
0
0.6
V
Digital Control Inputs (IN, EN)(2)
Input logic high
Input logic low
VIH
VIL
Input leakage
current
IIH, IIL
25°C
VI = 5.5 V or 0
Full
−100
2.7 V
−100
25
100
100
nA
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications
of Slow or Floating CMOS Inputs, literature number SCBA004.
7
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 2.5-V Supply(1) (continued)
V+ = 2.3 V to 2.7 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
24
MAX
UNIT
Dynamic
Turn-on time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
2.5 V
1.7
tON
Full
2.3 V to 2.7 V
1.5
Turn-off time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
2.5 V
5.2
tOFF
Full
2.3 V to 2.7 V
5
Break-beforemake time
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
2.5 V
3
tBBM
Full
2.3 V to 2.7 V
2
VGEN = 0, RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
2.5 V
6
pC
Charge injection
QC
31
33.5
10.5
17
20
10
ns
ns
30
40
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
2.5 V
19
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
2.5 V
57
pF
COM
OFF
capacitance
CCOM(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
2.5 V
36
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
2.5 V
57
pF
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 16
25°C
2.5 V
2
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
2.5 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
2.5 V
−64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
2.5 V
−64
dB
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 23
25°C
2.5 V
0.020
%
Total harmonic
distortion
Supply
25°C
0.001
Positive supply
I+
VI = V+ or GND,
Switch ON or OFF
2.7 V
current
Full
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
8
0.05
0.15
µA
A
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 1.8-V Supply(1)
V+ = 1.65 V to 1.95 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
NC, NO
ON leakage
current
COM
OFF leakage
current
COM
ON leakage
current
∆ron
ron(flat)
INO(OFF),
INC(OFF)
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = −2 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 1.5 V,
ICOM = 2 mA,
Switch ON,
See Figure 13
25°C
VNO or VNC = 0.6 V, 1.5 V,
ICOM = 2 mA,
Switch ON,
See Figure 13
0 ≤ (VNO or VNC) ≤ V+,
ICOM = 2 mA,
Switch ON,
See Figure 13
VNO or VNC = 0.6 V, 1.5 V,
ICOM = 2 mA,
Switch ON,
See Figure 13
25°C
VNC or VNO = 0.3 V, VCOM = 1.65 V,
Switch OFF,
or
See Figure 14
VNC or VNO = 1.65 V, VCOM = 0.3 V,
25°C
Full
Full
20
2
1.65 V
2.7
3.1
0.16
1.65 V
0.3
3
6
1.5
20
1.95 V
VNC or VNO = 1.65 V, VCOM = 0.3 V,
Switch ON,
or
See Figure 14
VNC or VNO = 0.3 V, VCOM = 1.65 V,
25°C
ICOM(OFF)
nA
−50
−1
0V
50
0.1
−10
−20
1
10
1.5
Full
nA
−50
−20
50
1.5
20
1.95 V
25°C
VNC or VNO = Open, VCOM = 0.3 V,
Switch ON,
or
See Figure 15
VNC or VNO = Open, VCOM = 1.65 V,
25°C
Full
nA
−50
Full
−1
0V
mA
A
20
1.95 V
Switch OFF,
See Figure 14
Ω
8
−20
Full
25°C
Ω
3
Full
VNC or VNO = 0.3 V, VCOM = Open,
Switch ON,
or
See Figure 15
VNC or VNO = 1.65 V, VCOM = Open,
Ω
Ω
25°C
Full
V
0.3
Full
INC(ON),
INO(ON)
ICOM(ON)
15
1.65 V
25°C
VNC or VNO = 1.95 V to 0,
ICOM(PWROFF)
VCOM = 0 to 1.95 V,
5.2
1.65 V
25°C
Switch OFF,
See Figure 14
INO(PWROFF), VNC or VNO = 0 to 1.95 V,
INC(PWROFF) VCOM = 1.95 V to 0,
V+
50
0.06
−10
−20
1
10
1.5
mA
A
20
1.95 V
nA
Full
−50
50
Full
1.5
5.5
V
0.6
V
Digital Control Inputs (IN, EN)(2)
Input logic high
Input logic low
Input leakage
current
VIH
VIL
IIH, IIL
VI = 5.5 V or 0
Full
0
25°C
−100
Full
1.95 V
−100
25
100
100
nA
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications
of Slow or Floating CMOS Inputs, literature number SCBA004.
9
W www.ti.com
SCDS215 – OCTOBER 2005
Electrical Characteristics for 1.8-V Supply(1) (continued)
V+ = 1.65 V to 1.95 V, TA = −40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA
V+
MIN
TYP
MAX
4.5
45
61
UNIT
Dynamic
Turn-on time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
1.8 V
tON
Full
1.65 V to 1.95 V
Turn-off time
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 17
25°C
1.8 V
tOFF
Full
1.65 V to 1.95 V
5
Break-beforemake time
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
25°C
1.8 V
4
tBBM
Full
1.65 V to 1.95 V
3
VGEN = 0, RGEN = 0,
CL = 1 nF,
See Figure 22
25°C
1.8 V
4
pC
Charge injection
QC
4
5.4
63
12
19
21
31
ns
ns
60
65
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
1.8 V
19
pF
NC, NO
ON capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 16
25°C
1.8 V
57
pF
COM
OFF
capacitance
CCOM(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 16
25°C
1.8 V
36
pF
COM
ON capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 16
25°C
1.8 V
57
pF
VI = V+ or GND,
See Figure 16
25°C
1.8 V
2
pF
BW
RL = 50 Ω,
Switch ON,
See Figure 19
25°C
1.8 V
100
MHz
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 20
25°C
1.8 V
−64
dB
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 21
25°C
1.8 V
−64
dB
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to
20 kHz,
See Figure 23
25°C
1.8 V
0.060
%
Digital input
capacitance
Bandwidth
OFF isolation
Crosstalk
Total harmonic
distortion
CI
Supply
25°C
0.001
Positive supply
Switch ON or
I+
VI = V+ or GND,
1.95 V
current
OFF
Full
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
10
0.05
0.1
µA
A
W www.ti.com
SCDS215 – OCTOBER 2005
TYPICAL PERFORMANCE
3.5
1.6
1.4
V+ = 1.8 V
3.0
2.0
V+ = 2.5 V
ron (W)
ron (Ω)
2.5
1.5
V+ = 3.3 V
1.0
1.2
TA = 855C
1.0
TA = 255C
0.8
TA = –405C
0.6
0.4
V+ = 5 V
0.5
0.2
0.0
0.0
0
1
2
3
4
5
6
0
1
2
VCOM (V)
VCOM (V)
1.2
TA = 255C
TA = –405C
0.6
50
45
40
35
30
25
20
15
10
5
0
Leakage Current (nA)
ron (W)
TA = 855C
0.8
0.4
0.2
0.0
0
1
2
3
VCOM (V)
4
5
ICOM(OFF)
INO/NC(OFF)
INO/NC(ON)
ICOM(ON)
6
Figure 3. ron vs VCOM (V+ = 5 V)
−40
25
TA (°C)
50
.5
0
.5
1
tON
40
0
−10
V+ = 5 V
−20
−30
−40
V+ = 3 V
−50
tON/tOFF (ns)
1
Charge Injection (QC)
10
.5
85
Figure 4. Leakage Current vs Temperature
(V+ = 5.5 V)
20
2
4
Figure 2. ron vs VCOM (V+ = 3 V)
Figure 1. ron vs VCOM
1.0
3
30
20
tOFF
10
−60
−70
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VCOM (V)
Figure 5. Charge Injection (QC) vs VCOM
0
0
1
2
3
4
5
V+ (V)
Figure 6. tON and tOFF vs Supply Voltage
11
W www.ti.com
SCDS215 – OCTOBER 2005
TYPICAL PERFORMANCE
16
2
2.0
14
tON/tOFF (ns)
12
10
tOFF
8
1.8
Logic-Level Threshold
tON
6
4
VIH
1.6
1.4
VIL
1.2
1
1.0
0.8
0.6
0.4
2
0.2
0
−40
25
TA (5C)
0.0
0
85
0
Figure 7. tON and tOFF vs Temperature
(V+ = 4.5 V)
1
2
3
V+ (V)
4
5
6
Figure 8. Logic-Level Threshold vs V+
0
0
−2
−10
−20
−30
Gain (dB)
Gain (dB)
−4
−6
−8
−40
−50
−60
−10
−70
−12
−80
−14
−90
0.1
1
10
Frequency (MHz)
100
1000
0.1
Figure 9. Bandwidth (Gain vs Frequency)
(V+ = 5 V)
1
10
Frequency (MHz)
100
1000
Figure 10. OFF Isolation vs Crosstalk
(V+ = 5 V)
0.010
V+ = 3 V
0.009
140
120
0.007
100
0.006
I+ (nA)
THD + Noise (%)
0.008
0.005
0.004
0.003
V+ = 5 V
80
60
40
0.002
20
0.001
0.000
0
0.001
0
0.1
1
Frequency (kHz)
10
Figure 11. Total Harmonic Distortion
vs Frequency
12
100
0
0.5
1
1.5
2
TA (5C)
2.5
3
Figure 12. Power-Supply Current
vs Temperature (V = 5 V)
3.5
4
W www.ti.com
SCDS215 – OCTOBER 2005
PIN DESCRIPTION
PIN
NUMBER
NAME
1
COM
DESCRIPTION
Common
2
EN
3
GND
Enable control input
Digital ground
4
GND
Digital ground
5
IN
Digital control to connect COM to NO or NC
6
NO
Normally open
7
NC
Normally closed
8
V+
Power supply
PARAMETER DESCRIPTION
SYMBOL
DESCRIPTION
VCOM
Voltage at COM
VNC
Voltage at NC
VNO
Voltage at NO
ron
Resistance between COM and NC or COM and NO ports when the channel is ON
rpeak
Peak on-state resistance over a specified voltage range
∆ron
Difference of ron between channels in a specific device
ron(flat)
Difference between the maximum and minimum value of ron in a channel over the specified range of conditions
INC(OFF)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state under worst-case
input and output conditions
INC(PWROFF)
Leakage current measured at the NC port during the power-off condition, V+ = 0
INO(OFF)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state under
worst-case input and output conditions
INO(PWROFF)
Leakage current measured at the NO port during the power-off condition, V+ = 0
INC(ON)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output
(COM) open
INO(ON)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output
(COM) open
ICOM(ON)
Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state
and the output (NC or NO) open
ICOM(OFF)
Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the OFF state
and the output (NC or NO) open
ICOM(PWROFF)
Leakage current measured at the COM port during the power-off condition, V+ = 0
VIH
Minimum input voltage for logic high for the control input (IN, EN)
VIL
Maximum input voltage for logic low for the control input (IN, EN)
VI
Voltage at the control input (IN, EN)
IIH, IIL
Leakage current measured at the control input (IN, EN)
tON
Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation
delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning ON.
tOFF
Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation
delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning OFF.
tBBM
Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation delay
between the output of two adjacent analog channels (NC and NO) when the control signal changes state.
QC
Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO, or COM)
output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input.
Charge injection, QC = CL × ∆VCOM, CL is the load capacitance, and ∆VCOM is the change in analog output voltage.
13
W www.ti.com
SCDS215 – OCTOBER 2005
PARAMETER DESCRIPTION (continued)
SYMBOL
DESCRIPTION
CNC(OFF)
CNO(OFF)
Capacitance at the NC port when the corresponding channel (NC to COM) is OFF
CNC(ON)
CNO(ON)
Capacitance at the NC port when the corresponding channel (NC to COM) is ON
CCOM(ON)
Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON
CCOM(OFF)
Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is OFF
CI
Capacitance of control input (IN, EN)
OISO
OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency,
with the corresponding channel (NC to COM or NO to COM) in the OFF state.
XTALK
Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to NC). This
is measured in a specific frequency and in dB.
BW
Bandwidth of the switch. This is the frequency in which the gain of an ON channel is −3 dB below the DC gain.
THD
Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root mean
square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the fundamental harmonic.
I+
Static power-supply current with the control (IN, EN) pin at V+ or GND
14
Capacitance at the NO port when the corresponding channel (NO to COM) is OFF
Capacitance at the NO port when the corresponding channel (NO to COM) is ON
W www.ti.com
SCDS215 – OCTOBER 2005
PARAMETER MEASUREMENT INFORMATION
V+
VNC NC
COM
+
VCOM
Channel ON
VNO NO
r on +
IN or EN
VI
ICOM
VCOM * VNO or VNC
W
I COM
VI = VIH or VIL
+
GND
Figure 13. ON-State Resistance (ron)
V+
VNC NC
COM
+
VNO NO
VCOM
+
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
IN or EN
VI
+
GND
Figure 14. OFF-State Leakage Current (INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(PWROFF))
V+
VNC NC
+
COM
VNO NO
VCOM
ON-State Leakage Current
Channel ON
VI = VIH or VIL
IN or EN
VI
+
GND
Figure 15. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON))
15
W www.ti.com
SCDS215 – OCTOBER 2005
V+
Capacitance
Meter
VNC
NC
VNO
NO
VBIAS = V+ or GND
VI = V+ or GND
VCOM COM
VBIAS
Capacitance is measured at NC,
NO, COM, and IN inputs during
ON and OFF conditions.
VI
IN or EN
GND
Figure 16. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON))
V+
NC or NO VNC or VNO
VCOM
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
CL(2)
NC or NO
RL
IN or EN
VI
CL(2)
Logic
Input(1)
RL
GND
V+
Logic
Input
(VI)
50%
50%
0
tON
tOFF
Switch
Output
(VNC or VNO)
90%
90%
(1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
(2) CL includes probe and jig capacitance.
Figure 17. Turn-On (tON) and Turn-Off Time (tOFF)
V+
Logic
Input
(VI)
VNC or VNO
NC or NO
VCOM
V+
50%
0
COM
NC or NO
CL(2)
VI
Logic
Input(1)
IN
RL
Switch
Output
(VCOM)
90%
90%
tBBM
GND
VNC or VNO = V+
RL = 50 Ω
CL = 35 pF
(1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
(2) CL includes probe and jig capacitance.
Figure 18. Break-Before-Make Time (tBBM)
16
W www.ti.com
SCDS215 – OCTOBER 2005
V+
Network Analyzer
50 W
VNC
NC
Channel ON: NC to COM
COM
Source
Signal
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
IN or EN
VI
50 W
Source Power = 0 dBm
(632-mV P-P at 50-W load)
+
GND
DC Bias = 350 mV
Figure 19. Bandwidth (BW)
V+
Network Analyzer
Channel OFF: NC to COM
50 W
VNC NC
VI = V+ or GND
COM
Source
Signal
50 W
VCOM
NO
Network Analyzer Setup
IN or EN
Source Power = 0 dBm
(632-mV P-P at 50-W load)
VI
50 W
+
GND
DC Bias = 350 mV
Figure 20. OFF Isolation (OISO)
V+
Network Analyzer
50 W
Channel ON: NC to COM
VNC
Channel OFF: NO to COM
NC
VCOM
Source
Signal
VNO
NO
50 W
IN or EN
50 W
VI
+
VI = V+ or GND
GND
Network Analyzer Setup
Source Power = 0 dBm
(632-mV P-P at 50-W load)
DC Bias = 350 mV
Figure 21. Crosstalk (XTALK)
17
W www.ti.com
SCDS215 – OCTOBER 2005
V+
RGEN
VGEN
Logic
Input
(VI)
OFF
ON
OFF V
IL
NC or NO
COM
+
VIH
VCOM
∆VCOM
VCOM
NC or NO
CL(2)
VI
IN or EN
Logic
Input(1)
VGEN = 0 to V+
RGEN = 0
CL = 1 nF
QC = CL × ∆VCOM
VI = VIH or VIL
GND
(1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
(2) CL includes probe and jig capacitance.
Figure 22. Charge Injection (QC)
VI = VIH or VIL
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz CL = 50 pF
Channel ON: COM to NC
VSOURCE = V+ P-P
V+/2
V+
Audio Analyzer
RL
10 mF
Source
Signal
COM
600 W
600 W
NO
600 W
VI
IN
GND
(1) CL includes probe and jig capacitance.
Figure 23. Total Harmonic Distortion (THD)
18
10 mF
NC
CL(1)
PACKAGE OPTION ADDENDUM
www.ti.com
14-Nov-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TS5A3153DCUR
ACTIVE
US8
DCU
8
3000
Pb-Free
(RoHS)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3153DCURE4
ACTIVE
US8
DCU
8
3000
Pb-Free
(RoHS)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated