MBRF1535CT-MBRF15150CT Isolated 15.0AMP.Schottky Barrier Rectifiers ITO-220AB Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for transient protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case Mechanical Data Cases: ITO-220AB molded plastic body Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRF MBRF MBRF MBRF MBRF MBRF MBRF Units Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at TC=105 C Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=105oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) IF=7.5A, Tc=25oC IF=7.5A, Tc=125oC IF=15A, Tc=25oC IF=15A, Tc=125oC O Maximum Instantaneous Reverse Current @ Tc=25 C at Rated DC Blocking Voltage (Note 2) @ Tc=125 OC VRRM VRMS VDC I(AV) 1550 CT 50 35 50 1560 CT 60 42 60 1590 15100 15150 CT CT CT 90 100 150 63 70 105 90 100 150 V 15.0 A IFSM IRRM 150 1.0 A 0.5 VF － 0.57 0.84 0.72 0.75 0.65 － － IR 0.5 10 0.3 7.5 10,000 RθJC TJ TSTG A 0.92 0.82 － － 0..95 0..92 － 0.1 5.0 3.5 -65 to +150 -65 to +175 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case with Heatsink size of 2 in x 3 in x 0.25 in Al-Plate. http://www.luguang.cn V IFRM dV/dt Storage Temperature Range V A Maximum Thermal Resistance Per Leg (Note 3) Notes: 1545 CT 45 31 45 15 Voltage Rate of Change (Rated VR) Operating Junction Temperature Range 1535 CT 35 24 35 mail:[email protected] V mA mA V/uS o C/W o C o C MBRF1535CT-MBRF15150CT Isolated 15.0AMP.Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (MBRF1535CT THRU MBRF15150CT) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG FIG.1- FORWARD CURRENT DERATING CURVE 300 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 25 20 15 10 5 200 150 100 50 0 0 0 50 100 o CASE TEMPERATURE. ( C) 150 1 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG Tj=125 0C 10 INSTANTANEOUS REVERSE CURRENT. (mA) 10 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBRF1535CT-MBRF1545CT MBRF1550CT-MBRF1560CT Tj=125 0C 1 0.1 Tj=75 0C MBRF1535CT-MBRF1545CT MBRF1550CT-MBRF15150CT 0.01 Tj=25 0C MBRF1590CT-MBRF15150CT 0.01 0 0.001 0.1 0.2 0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 100 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 100 40 MBRF1535CT-MBRF1560CT MBRF1590CT-MBRF15150CT 10 1.0 10 REVERSE VOLTAGE. (V) http://www.luguang.cn 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 4,000 0.1 100 10 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 50 40 INSTANTANEOUS FORWARD CURRENT. (A) Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 250 100 10.0 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) mail:[email protected] Version: A06 100