1N5400G THRU 1N5408G GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 3.0 ampere operation at TA=105 with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: DO-201AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042 ounce, 1.195 grams inches DIM Maximum Ratings and Electrical Characteristics Max. Min. Max. A 0.283 0.374 7.20 9.50 B 0.189 0.208 4.80 5.30 C 0.048 0.051 1.20 1.30 D 1.000 - 25.40 - @25 Symbols 1N 5400G 1N 5401G mm Min. Note unless otherwise specified 1N 5402G 1N 5404G 1N 5406G 1N 5407G 1N 5408G Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward current TA=105 IF(AV) 3.0 Amps Peak forward surge current 8.3mS half sine-wave IFSM 200.0 Amps Maximum instantaneous forward voltage IFM=3.0A; TJ=25 (Note 1) VF 1.1 Volts Maximum DC reverse current at rated DC blocking voltage TJ=25 TJ=125 IR 5.0 50.0 A CJ 40 F 30 /W Typical junction capacitance Measure at 1.0MHz, VR=4.0V Typical thermal resistance Operating and storage temperature range R JA TJ, TSTG -65 to +175 Note: (1) Pulse test: Pulse width 300uSec, Duty cycle 1% 1 RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3