RL201G THRU RL207G GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound 2.0 ampere operation at TA=75 with no thermal runaway Glass passivated junction in DO-15 package Mechanical Data DIM ENSIONS Case: Molded plastic, DO-15 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.014 ounce, 0.395 gram inches DIM Maximum Ratings and Electrical Characteristics Symbols RL 201G RL 202G mm Min. Max. Min. Max. A 0.228 0.299 5.8 7.6 B 0.102 0.142 2.6 3.6 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - @25 Note unless otherwise specified RL 203G RL 204G RL 205G RL 206G RL 207G Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward current TA=75 I(AV) 2.0 Amps Peak forward surge current 8.3mS half sine-wave IFSM 60.0 Amps Maximum instantaneous forward voltage IFM=2.0A; TA=25 (Note 1) VF 1.0 Volts Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 IR 5.0 50.0 A CJ 20 F 50 /W Typical junction capacitance Measure at 1.0MHz, VR=4.0V Typical thermal resistance Operating and storage temperature range R JA TJ, TSTG -65 to +175 Note: (1) Pulse test: Pulse width 300uSec, Duty cycle 1% 1 RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3