FR101G THRU FR107G GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature metallurgically bonded construction Capable of meeting environmental standards of MIL-S-19500 For use in high frequency rectifier circuits Fast switching for high efficiency Glass passivated cavity-free junction 1.0 ampere operation at TA=55 with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension. Mechanical Data DIMENSIONS DIM Case: DO-41 molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.335 gram Maximum Rating and Electrical Characteristics @25 Symbols FR 101G FR 102G inches mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note unless otherwise specified FR 103G FR 104G FR 105G FR 106G FR 107G Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward rectified current at TA=55 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave IFSM 30.0 Amps Maximum instantaneous forward voltage IFM=1.0A; TA=25 (Note 1) VF 1.3 Volts Maximum DC reverse current at rated DC blocking voltage IR 5.0 100.0 TA=25 TA=100 Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance Trr Measured at 1.0MHz, VR=4.0V Operating and storage temperature range 150 250 CJ 15.0 TJ, TSTG -65 to +150 Note: (1) Pulse test: Pulse width 300uSec, Duty cycle 1% 1 A 500 nS F RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3