6A05G THRU 6A10G GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes Features High surge current capability Plastic package has Underwriters Laboratory Flammability classification 94V-0 utilizing Flame retardant epoxy molding compound Glass passivated junction in R-6 package High current operation 6.0 ampere @ TA=75 Mechanical Data DIM ENSIONS Case: Molded plastic, R-6 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.074 ounce, 2.105 grams DIM inches mm Min. Max. Min. Max. A 0.339 0.358 8.6 9.1 B 0.339 0.358 8.6 9.1 C 0.047 0.052 1.2 1.3 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics * @TA=25 unless otherwise specified. Single phase, half-wave, 60Hz, resistive or inductive load. Symbols 6A05G 6A1G 6A2G 6A4G 6A6G 6A8G 6A10G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at 75 I(AV) 6.0 Amps Maximum overload surge current at 1 cycle (Note 1) IFSM 400.0 Amps Maximum forward voltage at 6.0A DC VF 1.0 Volt Maximum full load reverse current, full cycle average at 25 IR 10 A Maximum DC reverse current at rated DC blocking voltage and 100 IR 500 A CJ 150.0 F 20.0 4.0 /W Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating temperature range Storage temperature range R R JA JL TJ -55 to +150 TSTG -55 to +175 Notes: (1) Peak forward surge current, per 8.3 ms single half sine-wave superimposed on rated load (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length P.C.B. mounted with 1.1X1.1 (30X30mm) copper pads 1 RATINGS AND CHARACTERISTIC CURVES 2