HER601 THRU HER608 HIGH EFFICIENCY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes Features Plastic package has Underwriters Laboratory Flammability classification 94V-0 utilizing Flame retardant epoxy molding compound Void-free plastic in R-6 package 6.0 ampere operation at TA=55 with no thermal runaway Ultra fast swithcing for high efficiency Mechanical Data DIM ENSIONS Case: Molded plastic, R-6 Terminals: Axial leads, solderable per MIL-STD-202, mehtod 208 Polarity: Band denotes cathode Mounting Position: Any Weight: 0.074 ounce, 2.1 grams inches DIM mm Min. Max. Min. Max. A 0.339 0.358 8.6 9.1 B 0.339 0.358 8.6 9.1 C 0.047 0.052 1.2 1.3 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Symbols HER 601 HER 602 HER 603 HER 604 HER 605 HER 606 HER 607 HER 608 Units Peak reverse voltage, Repetitive; VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 210 280 420 560 700 Volts DC reverse voltage VDC 50 100 200 300 400 600 800 1000 Volts Average forward current, IO@TA=55 3/8" lead length, 60Hz, resistive or inductive load I(AV) 6.0 Amps Peak forward surge current, IFM (surge) 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 300.0 Amps Maximum forward voltage @6.0A, 25 VF Maximum reverse current. @rated reverse voltage Tj=25 Tj=100 Reverse recovery time IF=0.5A, IR=1A, IRR=0.25A Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating and storage temperature range 1.00 1.10 Trr 50 CJ R 1.70 10.0 500.0 IR JA TJ, TSTG 1 A 75 nS 300 F 10.0 /W -55 to +150 Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (2) Thermal resistance from junction to ambient and from junction to lead length 0.375 (9.5mm) P.C.B. mounted Volts RATINGS AND CHARACTERISTIC CURVES 2