RL101FG THRU RL107FG GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Glass passivated junction 1.0 ampere operation at TA=55 with no thermal runaway Fast switching for high efficiency Mechanical Data DIMENSIONS Case: Molded plastic, A-405 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.008 ounce, 0.235 gram DIM inches mm Note Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - RL 103FG RL 104FG RL 105FG RL 106FG RL 107FG Units Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL 101FG RL 102FG Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum forward voltage at 1.0A VF 1.30 Volts IR 5.0 100.0 A Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Maximum reverse recovery time (Note 1) Trr Typical junction capacitance (Note 2) CJ Typical thermal resistance (Note 3) Operating and storage temperature range R 150 JA TJ, TSTG 250 1 nS F 67.0 /W -55 to +150 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted 500 10.0 RATINGS AND CHARACTERISTIC CURVES 2