TE150R THRU TE158R GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT - 1.5 Amperes DO-15 FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound l 1.5 ampere operation at TA=55 with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Fast switching for high efficiency l Glass passivated junction in DO-15 package MECHANICAL DATA Case: Molded plastic, DO-15 Terminals: axial leads, solderable per MIL-STD-202, Method 208 Polarity: denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. TE150R TE151R TE152R TE154R TE156R TE158R UNITS Peak Reverse Voltage, Repetitive; VRM Maximum RMS Voltage DC Reverse Voltage; VR Average Forward Current, IO @ TA=55 3.8”lead length 60 Hz, resistive or inductive load Peak Forward Surge Current, IFM (surge) 8.3msec. single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage VF @1.5A, 25 Maximum Reverse Current, @Rated Ta=25 Reverse Voltage Ta=100 Typical Junction capacitance (Note 1) CJ Typical Thermal Resistance (Note 2) R JA Reverse Recovery Time IF=.5A, IR=1A, Irr=.25A Operating and Storage Temperature Range 50 35 50 150 100 70 100 150 200 140 200 150 400 280 400 1.5 V V V A 50 A 1.3 5.0 150 V A 25 45 PF 150 600 420 600 250 -55 to +150 NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted 800 560 800 500 /W ns RATING AND CHARACTERISTIC CURVES TE150R THRU TE158R Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM Fig. 2- FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 4-TYPICAL JUNCTION CAPACITANCE vs. REVERSE VOLTAGE Fig. 5-PEAK FORWARD SURGE CURRENT