HITACHI HA17904PSJ

HA17358, HA17904 Series
Dual Operational Amplifier
Description
HA17904 and HA17358 are dual operational amplifiers which, provide internal phase compensation and
high gain, and mono power source operation is possible. It can be widely applied to control equipment and
to general use.
Features
• Wide range of operating supply voltage and mono power source operation is possible.
• Wide range of common mode input voltage possible to operate with an input around 0V, and output
around 0V is available.
• Frequency characteristics and input bias currrent are temperature compensated.
Ordering Information
Type No.
Application
Package
HA17904PSJ
Car use
DP-8
HA17904FPJ
Car use
FP-8D
HA17904FPK
Car use
HA17904PS
Industrial use
DP-8
HA17904FP
Industrial use
FP-8D
HA17358
Commercial use
DP-8
HA17358F
Commercial use
FP-8D
HA17358, HA17904 Series
Pin Arrangement
Vout1
1
Vin(–)1
2
Vin(+)1
3
GND
4
1
– +
2
+ –
8
VCC
7
Vout2
6
Vin(–)2
5
Vin(+)2
(Top View)
Circuit Schematic (1/2)
Q5
Vin(–)
Q1
Q2
Q3
Q4
Q6
Q7
C
R1
Vin(+)
Vout
Q11
Q10
Q8
2
Q9
Q13
Q12
HA17358, HA17904 Series
Absolute Maximum Ratings (Ta = 25°C)
Ratings
HA17358
HA17358
F
HA17904
PS
HA17904
FP
HA17904
PSJ
HA17904
FPJ
HA17904
FPK
Unit
32
32
32
32
32
32
32
V
I O sink
50
50
50
50
50
50
50
mA
Commonmode input
voltage
VCM
–0.3 to
VCC
–0.3 to
VCC
–0.3 to
VCC
–0.3 to
VCC
–0.3 to
VCC
–0.3 to
VCC
–0.3 to
VCC
V
Commonmode
differential
voltage
V
±VCC
±VCC
±VCC
±VCC
±VCC
±VCC
±VCC
V
Power
dissipation
PT
570* 1
385* 2
570* 1
385* 2
570* 1
385* 2
385* 2
mW
Operating
temperature
range
Topr
–20 to
+75
–20 to
+75
–20 to
+75
–20 to
+75
–40 to
+85
–40 to
+85
–40 to
+125
°C
Storage
temperature
range
Tstg
–55 to
+125
–55 to
+125
–55 to
+125
–55 to
+125
–55 to
+125
–55 to
+125
–55 to
+150
°C
Item
Symbol
Supply
voltage
VCC
Output sink
current
IN(diff)
Notes: 1. These are the allowable values up to Ta = 55 °C. Derate by 8.3mW/°C above that temperature.
2. These are the allowable values up to Ta = 45 °C mounting on 30% wiring density glass epoxy
board. Derate by 7.14mW/°C above that temeperature.
3
HA17358, HA17904 Series
Electrical Characteristics 1 (VCC = +15V, Ta = 25°C)
Item
Symbol
Min
Typ
Max
Unit
Test Conditions
Input offset voltage
VIO
—
3
7
mV
VCM = 7.5V, RS = 50Ω, Rf = 50kΩ
Input offset current
I IO
—
5
50
nA
VCM = 7.5V, IIO = | II (+) – I I (–) |
Input bias current
I IB
—
30
250
nA
VCM = 7.5V
Power source rejection
ratio
PSRR
—
93
—
dB
RS = 1kΩ, Rf = 100kΩ
Voltage gain
AVD
75
90
—
dB
RL = ∞, RS = 1kΩ, Rf = 100kΩ
Common mode rejection
ratio
CMR
—
80
—
dB
RS = 50Ω, Rf = 5kΩ
Common mode input
voltage range
VCM (+)
13.5
—
—
V
RS = 1kΩ, Rf = 100kΩ
VCM (–)
—
—
–0.3
V
RS = 1kΩ, Rf = 100kΩ
Peak-to-peak output
voltage
Vop-p
—
13.6
—
V
f = 100Hz, RL = 20kΩ, RS = 1kΩ,
Rf = 100kΩ
Output source current
Iosource
20
40
—
mA
VIN+ = 1V, VIN– = 0V, VOH = 10V
Output sink current
Iosink
10
20
—
mA
VIN– = 1V, VIN+ = 0V, VOL = 2.5V
Output sink current
Iosink
15
50
—
µA
VIN– = 1V, VIN+ = 0V,
Vout = 200mV
Supply current
I CC
—
0.8
2
mA
VIN = GND, RL = ∞
Slew rate
SR
—
0.2
—
V/µs
RL = ∞, VCM = 7.5V, f = 1.5kHz
Channel separation
CS
—
120
—
dB
f = 1kHz
Note: As for the characteristic curve, refer to HA17902.
Electrical Characteristics 2 (VCC = +15V, Ta =–40 to +125°C)
Item
Symbol
Min
Typ
Max
Unit
Test Conditions
Input offset voltage
VIO
—
—
7
mV
VCM = 7.5V, RS = 50Ω, RL = 50kΩ
Input offset current
I IO
—
—
200
nA
VCM = 7.5V, IIO = | II (+) – I I (–) |
Input bias current
I IB
—
—
500
nA
VCM = 7.5V
Common mode input
voltage range
VCM
0
—
13.0
V
RS = 1kΩ, Rf = 100kΩ
Supply current
I CC
—
—
4
mA
VIN = GND, RL = ∞
Note: As for the characteristic curve, refer to HA17904FPK.
4
HA17358, HA17904 Series
Package Dimensions
Unit: mm
4.85
4.4
5.25 Max
5
8
1
0.75 Max
*0.22 ± 0.05
0.20 ± 0.04
2.03 Max
4
0.25
6.50 +– 0.15
1.05
0.10 ± 0.10
0° – 8°
1.27
*0.42 ± 0.08
0.40 ± 0.06
0.25
0.60 +– 0.18
0.15
0.12 M
*Dimension including the plating thickness
Base material dimension
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
FP-8D
—
Conforms
0.10 g
Unit: mm
4.85
4.4
5.25 Max
5
8
1
0.75 Max
*0.22 ± 0.05
0.20 ± 0.04
2.03 Max
4
0.25
6.50 +– 0.15
1.05
1.27
*0.42 ± 0.08
0.40 ± 0.06
0.10 ± 0.10
0° – 8°
0.25
0.60 +– 0.18
0.15
0.12 M
*Dimension including the plating thickness
Base material dimension
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
FP-8D
—
Conforms
0.10 g
5
HA17358, HA17904 Series
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
: http:semiconductor.hitachi.com/
Europe
: http://www.hitachi-eu.com/hel/ecg
Asia (Singapore)
: http://www.has.hitachi.com.sg/grp3/sicd/index.htm
Asia (Taiwan)
: http://www.hitachi.com.tw/E/Product/SICD_Frame.htm
Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm
Japan
: http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe GmbH
Electronic components Group
Dornacher Straβe 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 778322
Hitachi Asia Pte. Ltd.
16 Collyer Quay #20-00
Hitachi Tower
Singapore 049318
Tel: 535-2100
Fax: 535-1533
Hitachi Asia Ltd.
Taipei Branch Office
3F, Hung Kuo Building. No.167,
Tun-Hwa North Road, Taipei (105)
Tel: <886> (2) 2718-3666
Fax: <886> (2) 2718-8180
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower, World Finance Centre,
Harbour City, Canton Road, Tsim Sha Tsui,
Kowloon, Hong Kong
Tel: <852> (2) 735 9218
Fax: <852> (2) 730 0281
Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1998. All rights reserved. Printed in Japan.
6