LM107, LM207, LM307 HIGH-PERFORMANCE OPERATIONAL AMPLIFIERS SLOS060 – D962, DECEMBER 1970 – REVISED SEPTEMBER 1990 • • • • • • Low Input Currents No Frequency Compensation Required Low Input Offset Parameters Short-Circuit Protection No Latch-Up Wide Common-Mode and Differential Voltage Ranges LM107 . . . J OR W PACKAGE (TOP VIEW) NC NC NC IN – IN + VCC – NC description The LM107, LM207, and LM307 are high-performance operational amplifiers featuring very low input bias current and input offset voltage and current to improve the accuracy of high-impedance circuits using these devices. 14 2 13 3 12 4 11 5 10 6 9 7 8 NC NC NC VCC + OUT NC NC LM107 . . . JG PACKAGE LM207, LM307 . . . D OR P PACKAGE (TOP VIEW) NC IN – IN + VCC – The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. 1 8 2 7 3 6 4 5 NC VCC + OUT NC LM107 . . . U FLAT PACKAGE (TOP VIEW) The LM107 is characterized for operation over the full military temperature range of – 55°C to 125°C, the LM207 is characterized for operation from – 25°C to 85°C, and the LM307 is characterized for operation from 0°C to 70°C. NC NC IN – IN + VCC – symbol 1 10 2 9 3 8 4 7 5 6 NC COMP VCC + OUT NC NC – No internal connection + IN + 1 OUT – IN – AVAILABLE OPTIONS TA VIO max AT 25°C 0°C to 70°C PACKAGE SMALL-OUTLINE (D) CERAMIC (J) CERAMIC DIP (JG) PLASTIC DIP (P) FLAT PACK (U) FLAT PACK (W) 7.5 mV LM307D — — LM307P — — – 25°C to 85°C 2 mV LM207D — — LM207P — — – 55°C to 125°C 2 mV — LM107J LM107JG — LM107U LM107W The D package is available taped and reeled. Add the suffix R to the device type, (e.g., LM307DR). Copyright 1990, Texas Instruments Incorporated BASIC5 PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 LM107, LM207, LM307 HIGH-PERFORMANCE OPERATIONAL AMPLIFIERS SLOS060 – D962, DECEMBER 1970 – REVISED SEPTEMBER 1990 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) LM107 LM207 LM307 UNIT Supply voltage, VCC + (see Note 1) 22 22 18 V Supply voltage, VCC – (see Note 1) – 22 – 22 – 18 V Differential input voltage (see Note 2) ± 30 ± 30 ± 30 V V ± 15 ± 15 ± 15 unlimited unlimited unlimited Input voltage (either input, see Notes 1 and 3) Duration of output short circuit (see Note 4) Continuous total dissipation See Dissipation Rating Table Operating free-air temperature range – 55 to 125 – 25 to 85 0 to 70 °C Storage temperature range – 65 to 150 – 65 to 150 – 65 to 150 °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J, JG, U, or W package Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package NOTES: 1. 2. 3. 4. °C 300 260 °C 260 All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC –. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output may be shorted to ground or either power supply. For the LM107 only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature. For the LM207 only, the unlimited duration of the short circuit applies at (or below) 85°C case temperature or 75°C free air temperature. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR D J JG P U W 500 mW 500 mW 500 mW 500 mW 500 mW 500 mW 5.8 mW/°C 11.0 mW/°C 8.4 mW/°C N/A 5.4 mW/°C 8.0 mW/°C DERATE ABOVE TA 64°C 105°C 90°C N/A 57°C 87°C TA = 70°C POWER RATING TA = 85°C POWER RATING TA = 125°C POWER RATING 464 mW 500 mW 500 mW 500 mW 432 mW 500 mW 377 mW 500 mW 500 mW 500 mW 351 mW 500 mW — 275 mW 210 mW — 135 mW 200 mW recommended operating conditions MIN NOM MAX UNIT Supply voltage, VCC + 2 18 V Supply voltage, VCC – –2 – 18 V 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 LM107, LM207, LM307 HIGH-PERFORMANCE OPERATIONAL AMPLIFIERS SLOS060 – D962, DECEMBER 1970 – REVISED SEPTEMBER 1990 electrical characteristics at specified free-air temperature (see Note 5) PARAMETER TEST CONDITIONS† LM107, LM207 MIN MAX 0.6 2 25°C VIO Input offset voltage VO = 0 Full range αVIO Average temperature coefficient of input offset voltage VO = 0 Full range IIO Input offset current VO = 0 Full range αIIO Average g temperature coefficient of input offset current TA = – 55°C to 25°C TA = 25°C to MAX TA = 0°C to 25°C LM307 TYP MIN Input bias current VICR Common-mode input voltage range VO(PP) AVD rI Maximum peak-to-peak output voltage swing Large-signal Large signal differential voltage am lification amplification 25°C Common mode rejection ratio Common-mode kSVR Supply y voltage g rejection j ratio (∆VCC/∆VIO) ICC Supply current 2 7.5 10 3 15 6 30 1.5 10 3 50 20 0.02 0.2 0.01 0.1 70 0.002 25°C 30 Full range 75 0.3 70 250 100 ± 15 300 ± 12 Full range VCC ± = ± 15 V, RL = 10 kΩ VCC ± = ± 15 V, 25°C 24 Full range 24 25°C 20 RL = 2 kΩ Full range 20 25°C 50 Full range 25 25°C 1.5 4 0.5 2 25°C 80 98 70 90 Full range 80 25°C 80 Full range 80 VCC ± = ± 15 V, VO = ± 10 V, 0.6 0.001 See Note 6 28 24 20 mV µV/°C nA nA/°C nA V 28 24 26 UNIT V 26 20 200 25 200 15 V/mV RL = 2 kΩ Input resistance CMRR MAX 3 TA = 25°C to 70°C IIB TYP VIC = VICRmin ΜΩ dB 70 98 70 96 dB 70 No load, 25°C 1.8 3 VO = 0, See Note 6 MAX 1.2 2.5 1.8 3 mA † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for LM107 is – 55°C to 125°C, for LM207 is –25°C to 85°C, and for LM307 is 0°C to 70°C. NOTES: 5. Unless otherwise noted VCC± = ± 5 V to ± 20 V for LM107 and LM207, and VCC± = ± 5 V to ± 15 V for LM307. All typical values are at VCC ± = ± 15 V. 6. For the LM107 and LM207, VCC± = ± 20 V. For the LM307, VCC± = ± 15 V. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated