RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072 – MARCH 1978 – REVISED SEPTEMBER 1990 D D D D D D D D D RM4136 . . . J OR W PACKAGE ALL OTHERS . . . D OR N PACKAGE Continuous-Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity Gain Bandwidth . . . 3 MHz Typ Gain and Phase Match Between Amplifiers Designed To Be Interchangeable With Raytheon RC4136, RM4136, and RV4136 Low Noise . . . 8 nV√Hz Typ at 1 kHz (TOP VIEW) 1IN – 1IN + 1OUT 2OUT 2IN + 2IN – VCC – 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4IN – 4IN + 4OUT VCC+ 3OUT 3IN + 3IN – RM4136 . . . FK PACKAGE (TOP VIEW) 1IN + 1IN – NC 4IN – 4IN + description The RC4136, RM4136, and RV4136 are quad general-purpose operational amplifiers with each amplifier electrically similar to the µA741 except that offset null capability is not provided. 1OUT NC 2OUT NC 2IN + 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4OUT NC VCC + NC 3OUT 2IN – VCC– NC 3IN – 3IN + The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short circuit protected and the internal frequency compensation ensures stability without external components. 4 The RC4136 is characterized for operation from 0°C to 70°C, the RM4136 is characterized for operation over the full military temperature range of – 55°C to 125°C, and the RV4136 is characterized for operation from – 40°C to 85°C. NC – No internal connection symbol (each amplifier) IN+ + IN – – OUT AVAILABLE OPTIONS PACKAGE TA VIOmax AT 25°C 25 C SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (J) PLASTIC DIP (N) FLAT (W) 0°C to 70°C 6 mV RC4136D — — RC4136N — – 40 °C to 85°C 6 mV RV4136D — — RV4136N — – 55 °C to 125°C 4 mV — RM4136FK RM4136J — RM4136W The D packages are available taped and reeled. Add the suffix R to the device type (e.g., RC4136DR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072 – MARCH 1978 – REVISED SEPTEMBER 1990 schematic (each amplifier) VCC+ IN+ IN– OUT VCC– absolute maximum ratings over operating free-air temperature range (unless otherwise noted) RC4136 RM4136 RV4136 UNIT Supply voltage VCC + (see Note 1) 18 22 18 V Supply voltage VCC – (see Note 1) – 18 – 22 – 18 V Differential input voltage (see Note 2) ± 30 ± 30 ± 30 V Input voltage (any input, see Notes 1 and 3) ± 15 ± 15 ± 15 V Duration of output short circuit to ground, one amplifier at a time (see Note 4) unlimited Continuous total dissipation unlimited unlimited See Dissipation Rating Table Operating free-air temperature range 0 to 70 – 55 to 125 – 40 to 85 °C – 65 to 150 – 65 to 150 – 65 to 150 °C Case temperature for 60 seconds FK package — 260 — °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package — 300 — °C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or N package 260 — 260 °C Storage temperature range NOTES: 1. 2. 3. 4. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC – . Differential voltages are at IN+ with respect to IN –. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. DISSIPATION RATING TABLE 2 PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70°C POWER RATING TA = 85°C POWER RATING TA = 125°C POWER RATING D 800 mW 7.6 mW/°C 45°C 608 mW 494 mW — FK 800 mW 11.0 mW/°C 77°C 800 mW 715 mW 275 mW J 800 mW 11.0 mW/°C 77°C 800 mW 715 mW 275 mW N 800 mW 9.2 mW/°C 63°C 736 mW 598 mW — W 800 mW 8.0 mW/°C 50°C 640 mW 520 mW 200 mW POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072 – MARCH 1978 – REVISED SEPTEMBER 1990 recommended operating conditions MIN MAX Supply voltage, VCC + 5 15 UNIT V Supply voltage, VCC – –5 – 15 V electrical characteristics at specified free-air temperature, VCC+ = 15 V, VCC– = –15 V PARAMETER TEST CONDITIONS† RC4136 MIN 25°C VIL Input offset voltage VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 Vi Input voltage range VOM Maximum peak out ut voltage output swing RM4136 TYP MAX 0.5 6 Full range MIN MAX 0.5 4 7.5 25°C 5 Full range 140 Full range 200 5 500 140 800 MAX 0.5 6 7.5 1.50 5 400 140 ± 12 ± 14 ± 12 ± 14 ± 12 ± 14 RL = 10 kΩ 25°C ± 12 ± 14 ± 12 ± 14 ± 12 ± 14 RL = 2 kΩ 25°C ± 10 ± 13 ± 10 ± 13 ± 10 ± 13 RL ≥ 2 kΩ Full range ± 10 25°C 20 Full range 15 ± 10 300 50 350 Unity-gain bandwith 25°C ri Input resistance 25°C 0.3* 5 0.3* 5 RS = 50 Ω 25°C 70 90 70 90 VO = 0, kSVS Supplyy voltage g sensitivity (∆VIO/∆VCC) VCC = ± 9 V to ± 15 V, V VO = 0 25°C 30 Vn Equivalent input noise voltage (closed-loop) AVD = 100, BW = 1 Hz, f = 1 kHz, RS = 100 Ω 25°C 8 ICC Supply current am lifiers) (all four amplifiers) VO = 0, Total power dissipation (all four amplifiers) VO = 0, Crosstalk attenuation (VO1/ VO2) AVD = 100, f = 10 kHz, RS = 1 kΩ No load No load 20 25 3 nA V V 300 V/mV 15 3.5 150 nA ± 10 B1 VO = ± 10 V V, RL ≥ 2 kΩ mV 500 1500 25°C UNIT 200 500 1500 Large-signal g g differential voltage amplification PD TYP 500 AVD Common-mode CMRR rejection ratio MIN 6 300 25°C RV4136 TYP 30 150 8 3 MHz 0.3* 5 MΩ 70 90 dB 30 150 8 nV√Hz 25°C 5 11.3 5 11.3 5 11.3 MIN TA 6 13.7 6 13.3 6 13.7 MAX TA 4.5 10 4.5 10 4.5 10 25°C 150 340 150 340 150 340 MIN TA 180 400 180 400 180 400 MAX TA 135 300 135 300 135 300 25°C 105 105 105 µ µV/V mA mW dB * This parameter is not production tested. † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range is 0°C to 70°C for RC4136, – 55°C to 125°C for RM4136, and – 40°C to 85°C for RV4136. Minimum TA is 0°C for RC4136, – 55°C for RM4136, and – 40°C for RV4136. Maximum TA is 70°C for RC4136, 125°C for RM4136, and 85°C for RV4136. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072 – MARCH 1978 – REVISED SEPTEMBER 1990 operating characteristics, VCC+ = 15 V, VCC– = –15 V, TA = 25°C PARAMETER tr Rise time Overshoot factor SR 4 Slew rate at unity gain TEST CONDITIONS VI = 20 mV,, CL = 100 pF RL = 2 kΩ,, VI = 10 V, CL = 100 pF RL = 2 kΩ, POST OFFICE BOX 655303 RC4136, RV4136 MIN • DALLAS, TEXAS 75265 TYP MAX RM4136 MIN TYP 0.13 0.13 5% 5% 17 1.7 17 1.7 MAX UNIT µs V/µs IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated