HD74HC245 Octal Bus Transceivers (with 3-state outputs) Description Each device has an active low enable input G and a direction control input, DIR. When DIR is high, data flows from the A inputs to the B outputs. When DIR is low, data flows from the B inputs to the A outputs. The HD74HC245 transfers true data from one bus to the other. This device does not have schmitt trigger inputs. Features • • • • • High Speed Operation: tpd = 8 ns typ (CL = 50 pF) High Output Current: Fanout of 15 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Function Table Enable G Direction Control DIR Operation L L B data to A bus L H A data to B bus X Isolation H H : L : X : high level low level irrelevant HD74HC245 Pin Arrangement DIR 1 20 VCC A1 2 19 Enable G A2 3 18 B1 A3 4 17 B2 A4 5 16 B3 A5 6 15 B4 A6 7 14 B5 A7 8 13 B6 A8 9 12 B7 GND 10 11 B8 (Top view) Absolute Maximum Ratings Item Symbol Rating Unit Supply voltage range VCC –0.5 to +7.0 V Input voltage VIN –0.5 to VCC + 0.5 V Output voltage VOUT –0.5 to VCC + 0.5 V DC current drain per pin I OUT ±35 mA DC current drain per VCC, GND I CC, I GND ±75 mA DC input diode current I IK ±20 mA DC output diode current I OK ±20 mA Power dissipation per package PT 500 mW Storage temperature Tstg –65 to +150 °C 2 HD74HC245 DC Characteristics Ta = –40 to +85°C Ta = 25°C Item Symbol VCC (V) Min Typ Max Min Max Unit Input voltage VIH 2.0 1.5 — — 1.5 — V 4.5 3.15 — — 3.15 — 6.0 4.2 — — 4.2 — 2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35 6.0 — — 1.8 — 1.8 2.0 1.9 2.0 — 1.9 — 4.5 4.4 4.5 — 4.4 — 6.0 5.9 6.0 — 5.9 — 4.5 4.18 — — 4.13 — I OH = –6 mA 6.0 5.68 — — 5.63 — I OH = –7.8 mA 2.0 — 0.0 0.1 — 0.1 4.5 — 0.0 0.1 — 0.1 6.0 — 0.0 0.1 — 0.1 4.5 — — 0.26 — 0.33 I OL = 6 mA 6.0 — — 0.26 — 0.33 I OL = 7.8 mA VIL Output voltage VOH VOL Test Conditions V V V Vin = VIH or VIL I OH = –20 µA Vin = VIH or VIL I OL = 20 µA Off-state output current I OZ 6.0 — — ±0.5 — ±5.0 µA Vin = VIH or VIL, Vout = VCC or GND Input current Iin 6.0 — — ±0.1 — ±1.0 µA Vin = VCC or GND Quiescent supply current I CC 6.0 — — 4.0 40 µA Vin = VCC or GND, Iout = 0 µA — 3 HD74HC245 AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = –40 to +85°C Ta = 25°C VCC (V) Min Typ Max Min Max Unit Propagation delay t PLH 2.0 — — 90 — 115 ns time 4.5 — 8 18 — 23 6.0 — — 15 — 20 2.0 — — 90 — 115 4.5 — 8 18 — 23 6.0 — — 15 — 20 2.0 — — 150 — 190 4.5 — 16 30 — 38 6.0 — — 26 — 32 2.0 — — 150 — 190 4.5 — 12 30 — 38 6.0 — — 26 — 32 2.0 — — 150 — 190 4.5 — 17 30 — 38 6.0 — — 26 — 32 2.0 — — 150 — 190 4.5 — 18 30 — 38 6.0 — — 26 — 32 Item Symbol t PHL Output enable t ZL time t ZH Output disable t LZ time t HZ Output rise/fall t TLH 2.0 — — 60 — 75 time t THL 4.5 — 4 12 — 15 6.0 — — 10 — 13 — — 5 10 — 10 Input capacitance 4 Cin ns ns ns ns ns ns pF Test Conditions Unit: mm 24.50 25.40 Max 6.30 11 1 7.00 Max 20 10 1.30 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 1.27 Max 2.54 Min 5.08 Max 0.89 7.62 + 0.11 0.25 – 0.05 0° – 15° Hitachi Code JEDEC EIAJ Weight (reference value) DP-20N — Conforms 1.26 g Unit: mm 12.6 13 Max 11 1 10 1.27 *0.42 ± 0.08 0.40 ± 0.06 0.10 ± 0.10 0.80 Max *0.22 ± 0.05 0.20 ± 0.04 2.20 Max 5.5 20 0.20 7.80 +– 0.30 1.15 0° – 8° 0.70 ± 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DA — Conforms 0.31 g Unit: mm 12.8 13.2 Max 11 1 10 0.20 ± 0.10 0.935 Max 1.27 *0.42 ± 0.08 0.40 ± 0.06 *0.27 ± 0.05 0.25 ± 0.04 2.65 Max 7.50 20 0.25 10.40 +– 0.40 1.45 0° – 8° 0.57 0.70 +– 0.30 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DB Conforms — 0.52 g Unit: mm 6.50 6.80 Max 11 1 10 4.40 20 0.65 *0.22+0.08 –0.07 0.20 ± 0.06 1.0 0.13 M 6.40 ± 0.20 *Dimension including the plating thickness Base material dimension 0.07 +0.03 –0.04 0.10 *0.17 ± 0.05 0.15 ± 0.04 1.10 Max 0.65 Max 0° – 8° 0.50 ± 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) TTP-20DA — — 0.07 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.