HITACHI HD74LV1GT66A

HD74LV1GT66A
Analog Switch
ADE-205-565B (Z)
3rd. Edition
October 2000
Description
The HD74LV1GT66A has an analog switch in a 5 pin package. Switch section has its enable input control
(C). High level voltage applied to C turns on the switch section. Applications include signal gating,
chopping, modulation or demodulation (modem), and signal multiplexing for analog to digital and digital to
analog conversion systems. Low voltage and high speed operation is suitable for the battery powered
products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as hitachi uni logic series.
• Supplied on emboss taping for high speed automatic mounting.
• TTL compatible control input level.
Supply voltage range : 4.5 to 5.5 V
Operating temperature range : –40 to +85°C
• Control inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• Control inputs has hysteresis voltage for the slow transition.
HD74LV1GT66A
Outline and Article Indication
• HD74LV1GT66A
Index band
Marking
T
9
= Control code
(
or blank)
CMPAK–5
• HD74LV1GT66A
Marking
T
= Control code
VSON–5
Function Table
Control
Switch
L
OFF
H
ON
H : High level
L : Low level
2
9
HD74LV1GT66A
Pin Arrangement
IN/OUT 1
5
VCC
OUT/IN 2
GND
4 Control
3
(Top view)
3
HD74LV1GT66A
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
VCC
–0.5 to 7.0
V
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
Output : H or L
Input clamp current
I IK
–20
mA
VI < 0
Output clamp current
I OK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
I CC or IGND
±50
mA
Maximum power dissipation
at Ta = 25°C (in still air) *3
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Supply voltage range
Input voltage range
*1
Output voltage range
Notes:
*1, 2
Test Conditions
The absolute maximum ratings are values which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
4.5
5.5
V
Input voltage range
VI
0
5.5
V
Input / output voltage range
VI/O
0
VCC
V
Input transition rise or fall rate ∆t / ∆v
0
20
ns / V
Operating free-air temperature Ta
–40
85
°C
Note: Unused or floating inputs must be held high or low.
4
Conditions
VCC = 4.5 to 5.5 V
HD74LV1GT66A
Electrical Characteristics
Item
Input voltage
Symbol VCC (V)
Ta = 25°C
Ta = –40 to 85°C
Min Typ Max Min
Typ
Max
VIH
4.5 to 5.5
—
—
—
2.0
—
—
VIL
4.5 to 5.5
—
—
—
—
—
0.8
VH
5.0
—
—
—
—
On-state switch RON
resistance
4.5
—
40
75
Peak on
resistance
RON (P)
4.5
—
Off-state switch I s (OFF)
leakage current
5.5
On-state switch I s (ON)
leakage current
Input current
Quiescent
supply current
Unit Test Conditions
V
Control input only
0.15 —
V
VT+ – VT–
—
—
100
Ω
VIN = VCC or GND
VC = VIH
I T = 1 mA
50
100 —
—
125
Ω
VIN = VCC to GND
VC = VIH
I T = 1 mA
—
—
±0.1 —
—
±1.0 µA
VIN = VCC, VOUT = GND
or V IN = GND,
VO = VCC, VC = VIL
5.5
—
—
±0.1 —
—
±1.0 µA
VIN = VCC or GND
VC = VIH
I IN
0 to 5.5
—
—
±0.1 —
—
±1.0 µA
VIN = 5.5 V or GND
I CC
5.5
—
—
—
—
—
10
µA
∆I CC
5.5
—
—
—
—
—
1.5
mA VIN = 3.4 V
CIC
—
—
3.5
—
—
—
—
pF
Switch terminal CIN / OUT
capacitance
—
—
4.0
—
—
—
—
pF
Feedthrough
capacitance
—
—
0.5
—
—
—
—
pF
Hysteresis
voltage
Control input
capacitance
CIN–OUT
VIN = VCC or GND
5
HD74LV1GT66A
Switching Characteristics
• VCC = 5.0 ± 0.5 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
t PLH
—
1.0
4.0
—
7.0
delay time
t PHL
—
3.0
6.0
—
8.0
Enable time
t ZH
—
3.0
7.0
—
10.0
t ZL
—
5.0
12.0
—
16.0
t HZ
—
4.0
7.0
—
10.0
t LZ
—
6.0
12.0
—
16.0
Disable time
Unit Test
ns
ns
FROM
TO
Conditions (Input)
(Output)
CL = 15 pF
IN/OUT
OUT/IN
CL = 50 pF
or OUT/IN or IN/OUT
CL = 15 pF
C
IN/OUT
CL = 50 pF
ns
CL = 15 pF
or OUT/IN
C
IN/OUT
CL = 50 pF
or OUT/IN
Operating Characteristics
• CL = 50 pF
Item
Symbol
Power dissipation
capacitance
CPD
VCC (V)
5.0
Ta = 25°C
Min
Typ
Max
—
4.0
—
Unit
Test Conditions
pF
f = 10 MHz
Test Circuit
• R ON
VCC
VC =VIH
VCC
VIN =VCC
(ON)
VOUT
GND
+
1.0 mA
–
V
VIN – VOUT
6
R ON =
VIN–OUT
10 -3
(Ω)
HD74LV1GT66A
• I S (off), I S (on)
VCC
VCC
VC =VIL
VC =VIH
VCC
A
VCC
A
(OFF)
VIN =VCC
or GND
VOUT =GND
or VCC
GND
(ON)
VIN =VCC
or GND
GND
VOUT
OPEN
• t PLH ,t PHL
VCC
VC =VIH
tr
10%
VOUT
(ON)
CL=
15 or 50 pF
GND
3V
90% 90%
1.5 V
1.5 V
VIN
VCC
VIN
tf
10%
t PHL
t PLH
VOUT
50%
GND
VOH
50%
VOL
t r = t f = 3 ns
• t ZH ,t ZL / t HZ ,t LZ
VCC
VC
S1
VIN
R L=
1kΩ
VCC
GND
Item
t ZH
t ZL
t HZ
t LZ
S1
VCC
GND
VCC
GND
VOUT
CL=15 or
50 pF
S2
GND
VCC
GND
VCC
S2
tr
VC
10%
tf
90%
1.5 V
t ZH
R L=
1kΩ
3V
90%
1.5 V
10%
VOH –0.3 V
50%
VOUT
GND
t HZ
VOH
GND
t ZL
t LZ
50%
VCC
VOL +0.3 V
VOL
t r = t f = 3 ns
7
HD74LV1GT66A
• C IN/OUT , C IN–OUT
CIN–OUT
VC =GND
VCC
VCC
(OFF)
CIN/OUT
8
GND
CIN/OUT
HD74LV1GT66A
Package Dimensions
Unit : mm
(0.425)
1.3 ± 0.2
+ 0.1
1.25 ± 0.1
0.15– 0.05
0 – 0.1
(0.425)
5 – 0.2 ± 0.05
2.1 ± 0.3
(0.65)
(0.65)
0.9 ± 0.1
(0.2)
2.0 ± 0.2
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
0.12 ± 0.05
1.60 ± 0.05
0.50
1.20 ± 0.05
0.50
CMPAK-5
—
Conforms
0.006 g
5 – 0.2 ± 0.05
0.55 ± 0.05
1.6 ± 0.05
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
TNP-5D



9
HD74LV1GT66A
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia
Japan
:
:
:
:
http://semiconductor.hitachi.com/
http://www.hitachi-eu.com/hel/ecg
http://www.hitachi.com.sg/grp3/sicd
http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe GmbH
Electronic Components Group
Dornacher Stra§e 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Asia Ltd.
16 Collyer Quay #20-00
Hitachi Tower
Singapore 049318
Tel: 535-2100
Fax: 535-1533
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585160
Hitachi Asia Ltd.
Taipei Branch Office
3rd Flr, Hung Kuo Building, No.167,
Tun Hwa North Road, Taipei (105)
Taiwan
Tel: <886> (2) 2718-3666
Fax: <886> (2) 2718-8180
Telex: 23222 HAS-TP
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7th Flr, North Tower, World Finance Centre,
Harbour City, Canton Road, Tsim Sha Tsui,
Kowloon, Hong Kong
Tel: <852> (2) 735 9218
Fax: <852> (2) 730 0281
Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 1.0
10