HD74LV2GT66A 2–channel Analog Switch ADE-205-698 (Z) Rev.0 Jul. 2002 Description The HD74LV2GT66A has 2–channel analog switch in a 8 pin package. Each switch section has its own enable input control (C). High level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog to digital and digital to analog conversion systems. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • The basic gate function is lined up as hitachi uni logic series. • Supplied on emboss taping for high speed automatic mounting. • Control input is TTL compatible input level. Supply voltage range : 4.5 to 5.5 V Operating temperature range : –40 to +85°C • Control inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) • Control inputs have hysteresis voltage for the slow transition. • Package type Package type Package code Package suffix Taping code SSOP-8 pin TTP-8DBV US E (3,000 pcs / Reel) HD74LV2GT66A Outline and Article Indication • HD74LV2GT66A Index band Lot No. Y M W T 6 6 SSOP–8 Type No. Function Table Control Switch L OFF H ON H : High level L : Low level Rev.0, Jul. 2002, page 2 of 10 Y : Year code (the last digit of year) M : Month code W : Week code HD74LV2GT66A Pin Arrangement IN / OUT1 1 8 VCC OUT / IN1 2 7 CONT1 CONT2 3 6 OUT / IN2 GND 4 5 IN / OUT2 (Top view) Rev.0, Jul. 2002, page 3 of 10 HD74LV2GT66A Absolute Maximum Ratings Item Symbol Ratings Unit VCC –0.5 to 7.0 V VI –0.5 to 7.0 V VO –0.5 to VCC + 0.5 V Output : H or L IIK –20 mA VI < 0 Output clamp current IOK ±50 mA VO < 0 or VO > VCC Continuous output current IO ±25 mA VO = 0 to VCC Continuous current through VCC or GND ICC or IGND ±50 mA Maximum power dissipation *3 at Ta = 25°C (in still air) PT 200 mW Storage temperature Tstg –65 to 150 °C Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Notes: Test Conditions The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Symbol Min Max Unit Supply voltage range VCC 4.5 5.5 V Input voltage range VI 0 5.5 V Input / output voltage range VI/O 0 VCC V Input transition rise or fall rate ∆t / ∆v 0 20 ns / V Operating free-air temperature Ta –40 85 °C Note: Unused or floating control inputs must be held high or low. Rev.0, Jul. 2002, page 4 of 10 Conditions VCC = 4.5 to 5.5 V HD74LV2GT66A Electrical Characteristics Item Input voltage Symbol VCC (V) Ta = 25°C Ta = –40 to 85°C Min Typ Max Min Typ Max VIH 4.5 to 5.5 — — — 2.0 — — VIL 4.5 to 5.5 — — — — — 0.8 VH 5.0 — — — — On-state switch RON resistance 4.5 — 40 75 Peak on resistance RON (P) 4.5 — Difference of on-state resistance between switches ∆RON 4.5 Off-state switch Is (OFF) leakage current Unit Test Conditions V Control input only 0.15 — V VT – VT — — 100 Ω VIN = VCC or GND VC = VIH IT = 1 mA 50 100 — — 125 Ω VIN = VCC to GND VC = VIH IT = 1 mA — 7 15 — — 20 Ω VIN = VCC to GND VC = VIH IT = 1 mA 5.5 — — ±0.1 — — ±1.0 µA VIN = VCC, VOUT = GND or VIN = GND, VO = VCC, VC = VIL On-state switch Is (ON) leakage current 5.5 — — ±0.1 — — ±1.0 µA VIN = VCC or GND VC = VIH Input current IIN 0 to 5.5 — — ±0.1 — — ±1.0 µA VIN = 5.5 V or GND Quiescent supply current ICC 5.5 — — — — — 10 µA ∆ICC 5.5 — — — — — 1.5 mA VIN = 3.4 V CIC — — 3.5 — — — — pF Switch terminal CIN / OUT capacitance — — 4.0 — — — — pF Feedthrough capacitance — — 0.5 — — — — pF Hysteresis voltage Control input capacitance CIN–OUT + – VIN = VCC or GND Rev.0, Jul. 2002, page 5 of 10 HD74LV2GT66A Switching Characteristics • VCC = 5.0 ± 0.5 V Item Symbol Ta = 25°C Ta = –40 to 85°C Unit Test Min Typ Max Min Max Propagation delay time tPLH tPHL — 1.0 4.0 — 7.0 — 3.0 6.0 — 8.0 Enable time tZH tZL — 3.0 7.0 — 10.0 — 5.0 12.0 — 16.0 tHZ tLZ — 4.0 7.0 — 10.0 — 6.0 12.0 — 16.0 Disable time FROM Conditions (Input) ns CL = 15 pF CL = 50 pF ns CL = 15 pF IN/OUT OUT/IN or OUT/IN or IN/OUT C IN/OUT or OUT/IN C IN/OUT or OUT/IN CL = 50 pF ns CL = 15 pF TO (Output) CL = 50 pF Operating Characteristics • CL = 50 pF Item Power dissipation capacitance Symbol CPD Rev.0, Jul. 2002, page 6 of 10 VCC (V) 5.0 Ta = 25°C Min Typ Max — 4.0 — Unit Test Conditions pF f = 10 MHz HD74LV2GT66A Test Circuit • R ON VCC VC =VIH VCC VIN =VCC (ON) VOUT VIN–OUT R ON = 10 –3 GND 1.0 mA + (Ω) − V VIN – VOUT • I S (off), I S (on) VCC VCC VC =VIL VC =VIH VCC A VCC (OFF) VIN =VCC or GND GND A VOUT =GND or VCC (ON) VIN =VCC or GND GND VOUT OPEN • t PLH ,t PHL VCC VC =VIH tr VIN VCC VIN (ON) GND VOUT CL= 15 or 50 pF 10% VOUT tf 90% 90% 1.5 V 1.5 V t PLH 50% 3V 10% t PHL GND VOH 50% VOL t r = t f = 3 ns Rev.0, Jul. 2002, page 7 of 10 HD74LV2GT66A • t ZH ,t ZL / t HZ ,t LZ VCC VC S1 VIN R L= 1kΩ VCC VOUT GND Item t ZH t ZL S1 VCC t HZ GND VCC t LZ GND VC 10% S2 CL=15 or 50 pF tf tr 90% 1.5 V t ZH R L= 1kΩ GND VCC t r = t f = 3 ns CIN–OUT VCC VCC (OFF) Rev.0, Jul. 2002, page 8 of 10 VOH –0.3 V t LZ • C IN/OUT , C IN–OUT CIN/OUT GND GND VOH GND t ZL 50% GND VCC VC =GND 10% t HZ 50% VOUT S2 3V 90% 1.5 V CIN/OUT VCC VOL +0.3 V VOL HD74LV2GT66A Package Dimensions 2.0 ± 0.2 1.5 ± 0.2 + 0.1 (0.17) 8 − 0.2 − 0.05 + 0.1 0.13 − 0.05 0 − 0.1 0.7 ± 0.1 (0.4) 2.3 ± 0.1 (0.5) (0.5) (0.5) 3.1 ± 0.3 (0.4) Unit: mm Hitachi Code JEDEC JEITA Mass (reference value) TTP-8DBV 0.010 g Rev.0, Jul. 2002, page 9 of 10 HD74LV2GT66A Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 URL http://www.hitachisemiconductor.com/ For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-6538-6533/6538-8577 Fax : <65>-6538-6933/6538-3877 URL : http://semiconductor.hitachi.com.sg Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen Postfach 201, D-85619 Feldkirchen Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-2735-9218 Fax : <852>-2730-0281 URL : http://semiconductor.hitachi.com.hk Copyright © Hitachi, Ltd., 2002. All rights reserved. Printed in Japan. Colophon 6.0 Rev.0, Jul. 2002, page 10 of 10