ETC HD74HCT1G66CM

HD74HCT1G66
Analog Switch
ADE-205-308C (Z)
4th. Edition
April 2001
Description
The HD74HCT1G66 is high speed CMOS analog switch using silicon gate CMOS process. With CMOS
low power dissipation, it provides high speed. The device has low ON resistance for good transfer
characteristics and can take wide range of input voltage.
Features
• The basic gate function is lined up as hitachi uni logic series.
• Supplied on emboss taping for high speed automatic mounting.
• Control input is TTL compatible input level.
Supply voltage range : 4.5 to 5.5 V
Operating temperature range : –40 to +85°C
• |IOH| = IOL = 2 mA (min)
Outline and Article Indication
• HD74HCT1G66
Index band
Marking
F
CMPAK–5
9
= Control code
(
or blank)
HD74HCT1G66
Function Table
Control
Switch
L
OFF
H
ON
H : High level
L : Low level
GND ≤ VIN ≤ VCC
GND ≤ VOUT ≤ VCC
Pin Arrangement
IN/OUT 1
5
VCC
OUT/IN 2
GND
4 Control
3
(Top view)
2
HD74HCT1G66
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
VCC
–0.5 to 7.0
V
VI
–0.5 to VCC + 0.5
V
VO
–0.5 to VCC + 0.5
V
Output : H or L
Input clamp current
I IK
±20
mA
VI < 0 or VI > VCC
Output clamp current
I OK
±20
mA
VO < 0 or VO >VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through I CC or IGND
VCC or GND
±25
mA
Maximum power dissipation PT
at Ta = 25°C (in still air) *3
200
mW
Storage temperature
–65 to 150
°C
Supply voltage range
Input voltage range
*1
Output voltage range
Notes:
*1, 2
Tstg
Test Conditions
The absolute maximum ratings are values which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was caluculated using a junction temperature of
150°C.
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
4.5
5.5
V
Input voltage range
VI
0
5.5
V
Output voltage range
VI/O
0
VCC
V
Input rise / fall time
(Control input 0.3 V to 2.7 V)
t r, t f
0
500
ns
Operating temperature
Ta
–40
85
°C
Test Conditions
VCC = 4.5 to 5.5 V
Note: Unused or floating control inputs must be held high or low.
3
HD74HCT1G66
Electrical Characteristics
Item
Symbol VCC
Ta = 25°C
Ta = –40 to 85°C Unit Test Conditions
(V)
Min
Typ
Max
Min
Max
VIH
4.5 to
5.5
2.0
—
—
2.0
—
VIL
4.5 to
5.5
—
—
0.8
—
0.8
On resistance RON
4.5 to
5.5
—
100
200
—
Leak current
I S (off)
5.5
—
—
±0.1
I S (on)
5.5
—
—
Input current
I IN
5.5
—
Operating
current
I CC
5.5
5.5
Input voltage
Quiescent
I CCT
supply current
4
V
Control input only
250
Ω
VC = VIH
VIN = 0 to VCC
I IN/OUT = 1 mA
—
±1.0
µA
VC = VIL
VIN = VCC, VOUT = GND
or V IN = GND, VOUT = VCC
±0.1
—
±1.0
µA
VC = VIH
VIN = VCC or GND
—
±0.1
—
±1.0
µA
VIN = VCC or GND
—
—
1.0
—
10.0
µA
VIN = VCC or GND
—
—
2.0
—
2.9
mA
VC = 2.4 V,
VIN (switch) = VCC or GND
HD74HCT1G66
Switching Characteristics
Item
Symbol VCC
Ta = 25°C
(V)
Ta = –40 to 85°C Unit Test Conditions
Min
Typ
Max Min
Max
Propagation delay time
t PLH , t PHL 4.5
—
4
10
—
13
ns
RL = 10 kΩ
Output enable time
t ZH , t ZL
4.5
—
10
23
—
29
ns
RL = 1 kΩ
Output disable time
t HZ , t LZ
4.5
—
14
23
—
29
ns
RL = 1 kΩ
4.5
—
30
—
—
—
MHz
Control input capacitance CIN
—
2.5
5
—
5
pF
Switch I/O capacitance
CIN/OUT
—
2.5
—
—
—
pF
Feed through capacitance CIN–OUT
—
0.5
—
—
—
pF
Power dissipation
capacitance
—
5
—
—
—
pF
Maximum control
frequency
CPD
Test Circuit
• R ON
VCC
VC =VIH
VCC
VIN =VCC
(ON)
VOUT
GND
+
1.0 mA
V
R ON =
VIN–OUT
10 -3
(Ω)
—
VIN–OUT
5
HD74HCT1G66
• I S (off), I S (on)
VCC
VCC
VC =VIL
VC =VIH
VCC
A
VCC
A
(OFF)
VIN =VCC
or GND
GND
VOUT =GND
or VCC
(ON)
VIN =VCC
or GND
GND
VOUT
OPEN
• t PLH ,t PHL
VCC
t r = 6 ns
VC =VIH
VIN
VCC
VIN
VOUT
(ON)
GND
RL=
10 k Ω
CL=
50 pF
10%
VOUT
t f = 6 ns
90% 90%
1.3V
1.3V
t PLH
1.3V
3V
10%
t PHL
GND
VOH
1.3V
VOL
6
HD74HCT1G66
• t ZH ,t ZL / t HZ ,t LZ
VCC
VC
S1
VIN
R L=
1kΩ
VCC
GND
VOUT
CL=
50 pF
S2
t r = 6 ns
VC
10%
90%
1.3V
t ZH
R L=
1kΩ
S1
VCC
t LZ
GND
GND
VCC
S2
GND
VCC
3V
90%
1.3V
10%
90%
VOUT
Waveform - B
GND
t HZ
VOH
1.3V
Waveform - A
Item
t ZH
t ZL
t HZ
t f = 6 ns
GND
t ZL
t LZ
1.3V
VCC
10%
GND
VCC
VOL
Notes: 1. Waveform — A is for an output with internal conditions such that the output is high
except when disabled by the output control.
2. Waveform — B is for an output with internal conditions such that the output is low
except when disabled by the output control.
7
HD74HCT1G66
• Maximum control frequency
VCC
VC
VCC
VC
VCC
VIN =VCC
GND
GND
VOUT
RL=
1 kΩ
CL=
15 pF
VOUT
VCC /2
• C IN/OUT , C IN–OUT
CIN–OUT
VC =GND
VCC
VCC
(OFF)
CIN/OUT
8
GND
CIN/OUT
HD74HCT1G66
Package Dimensions
As of January, 2001
(0.65)
1.25 ± 0.1
(0.65)
0 – 0.1
(0.2)
2.0 ± 0.2
0.9 ± 0.1
(0.425)
5 – 0.2 ± 0.05
+ 0.1
0.15– 0.05
2.1 ± 0.3
1.3 ± 0.2
(0.425)
Unit: mm
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
CMPAK-5
—
Conforms
0.006 g
9
HD74HCT1G66
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia
Japan
:
:
:
:
http://semiconductor.hitachi.com/
http://www.hitachi-eu.com/hel/ecg
http://sicapac.hitachi-asia.com
http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585200
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straße 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00,
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road,
Hung-Kuo Building,
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower,
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon,
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://semiconductor.hitachi.com.hk
Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan.
Colophon 3.0
10