HITACHI HD74LVC16540

HD74LVC16540
16-bit Buffers / Line Drivers with 3-state Outputs
ADE-205-057B(Z)
Rev.2
September 1995
Description
The HD74LVC16540 has sixteen inverter drivers with three state outputs in a 48 pin package. When G1
and G 2 is low level, this drivers set up output is enable. Low voltage and high speed operation is suitable
at the battery drive product (note type personal computer) and low power consumption extends the life of a
battery for long time operation.
Features
•
•
•
•
•
VCC = 2.0 V to 5.5 V
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
High output current ±24 mA (@VCC = 3.0 V to 5.5 V)
Function Table
Inputs
G1
G2
A
Output Y
L
L
L
H
L
L
H
L
H
X
X
Z
X
H
X
Z
H:
L:
X:
Z:
High level
Low level
Immaterial
High impedance
HD74LVC16540
Pin Arrangement
1G1 1
48 1G2
1Y1 2
47 1A1
1Y2 3
46 1A2
GND 4
45 GND
1Y3 5
44 1A3
1Y4 6
43 1A4
VCC 7
42 VCC
1Y5 8
41 1A5
1Y6 9
40 1A6
GND 10
39 GND
1Y7 11
38 1A7
1Y8 12
37 1A8
2Y1 13
36 2A1
2Y2 14
35 2A2
GND 15
34 GND
2Y3 16
33 2A3
2Y4 17
32 2A4
VCC 18
31 VCC
2Y5 19
30 2A5
2Y6 20
29 2A6
GND 21
28 GND
2Y7 22
27 2A7
2Y8 23
26 2A8
2G1 24
25 2G2
(Top view)
2
HD74LVC16540
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage
VCC
–0.5 to 6.0
V
Input diode current
I IK
–50
mA
Input voltage
VI
–0.5 to 6.0
V
Output diode current
I OK
–50
mA
VO = –0.5 V
50
mA
VO = VCC +0.5 V
Output voltage
VO
–0.5 to VCC +0.5
V
Output current
IO
±50
mA
VCC, GND current / pin
I CC or IGND
100
mA
Storage temperature
Tstg
–65 to +150
°C
Conditions
VI = –0.5 V
Note: The absolute maximum ratings are values which must not individually be exceeded, and furthermore,
no two of which may be realized at the same time.
Recommended Operating Conditions
Item
Symbol
Ratings
Unit
Conditions
Supply voltage
VCC
1.5 to 5.5
V
Data retention
2.0 to 5.5
V
At operation
VI
0 to 5.5
V
G, A
VO
0 to V CC
V
Y
Operating temperature
Ta
–40 to 85
°C
Output current
I OH
–12
mA
VCC = 2.7 V
–24
mA
VCC = 3.0 V to 5.5 V
12
mA
VCC = 2.7 V
24
mA
VCC = 3.0 V to 5.5 V
10
ns/V
Input / output voltage
*2
I OL
*2
Input rise / fall time
*1
t r, t f
Notes: 1. This item guarantees maximum limit when one input switches.
Waveform : Refer to test circuit of switching characteristics.
2. duty cycle ≤ 50%
3
HD74LVC16540
Electrical Characteristics
Ta = –40 to 85°C
Item
Symbol VCC (V)
Min
Max
Unit Test Conditions
Input voltage
VIH
2.7 to 3.6
2.0
—
V
4.5 to 5.5
VCC×0.7
—
V
2.7 to 3.6
—
0.8
V
4.5 to 5.5
—
VCC×0.3
V
2.7 to 5.5
VCC –0.2 —
V
I OH = –100 µA
2.7
2.2
—
V
I OH = –12 mA
3.0
2.4
—
V
3.0
2.0
—
V
4.5
3.8
—
V
2.7 to 5.5
—
0.2
V
I OL = 100 µA
2.7
—
0.4
V
I OL = 12 mA
3.0
—
0.55
V
I OL = 24 mA
4.5
—
0.55
V
VIL
Output voltage
VOH
VOL
I OH = –24 mA
Input current
I IN
0 to 5.5
—
±5.0
µA
VIN = 5.5 V or GND
Off state output current
I OZ
5.5
—
±10
µA
VIN = VCC, GND
VOUT = VCC or GND
Quiescent supply current I CC
5.5
—
40
µA
VIN = VCC or GND
3.0 to 3.6
—
500
µA
VIN = one input at(VCC–0.6)V,
other inputs at V CC or GND
∆I CC
4
HD74LVC16540
Switching Characteristics
Ta = –40 to 85°C
Item
Symbol VCC (V)
Min
Typ Max Unit
From (Input)
To (Output)
Propagation delay time
t PLH
2.7
—
4.5
7.5
ns
A
Y
t PHL
3.3±0.3
1.5
3.5
6.5
ns
5.0±0.5
—
2.5
5.5
ns
t ZH
2.7
—
5.5
9.0
ns
G
Y
t ZL
3.3±0.3
1.5
4.0
8.0
ns
5.0±0.5
—
3.0
6.5
ns
t HZ
2.7
—
4.0
8.5
ns
G
Y
t LZ
3.3±0.3
1.5
3.5
7.5
ns
5.0±0.5
—
2.5
6.0
ns
Output enable time
Output disable time
Input capacitance
CIN
2.7
—
3.0
—
pF
Output capacitance
CO
2.7
—
15.0 —
pF
Test Circuit
VCC
VCC
G1
Pulse Generator
Zout = 50 Ω
Output
See Function Table
Input
A1
500 Ω S1
Y1
CL =
50 pF
450 Ω
OPEN
*1 See under table
GND
50 Ω Scope
G2
Symbol
t PLH / t PHL
t ZH/ t HZ
t ZL / t LZ
Notes:
1.
2.
S1
Vcc=2.7V,
3.3±0.3V
Vcc=5.0±0.5V
OPEN
GND
OPEN
GND
6V
2×Vcc
CL includes probe and jig capacitance.
A2-Y2 to A8-Y8 are identical to above load circuit.
5
HD74LVC16540
Waveforms – 1
tf
tr
Input A
VIH
90 %
90 %
Vref
Vref
10 %
10 %
GND
t PHL
t PLH
VOH
Output Y
Vref
Vref
VOL
Notes:
1.
2.
t r = 2.5 ns, tf = 2.5 ns
Input waveform : PRR = 10 MHz, duty cycle 50%
Waveforms – 2
tf
tr
90 %
Vref
10 %
Input G
VIH
90 %
Vref
10 %
t ZL
GND
t LZ
≈V OH1
Vref
Waveform - A
t ZH
Waveform - B
VOL + 0.3 V
t HZ
VOH – 0.3 V
Vref
VOL
VOH
≈V OL1
TEST
VIH
Vref
VOH1
VOL1
Notes:
1.
2.
3.
4.
6
Vcc=2.7V,
3.3±0.3V
Vcc=5.0±0.5V
2.7 V
Vcc
1.5 V
3V
50%Vcc
GND
GND
Vcc
t r = 2.5 ns, tf = 2.5 ns
Input waveform : PRR = 10 MHz, duty cycle 50%
Waveform – A shows input conditions such that the output is "L" level when enable by the
output control.
Waveform – B shows input conditions such that the output is "H" level when enable by the
output control.
Unit: mm
12.5
12.7 Max
25
6.10
48
1
*0.21 +0.04
–0.05
0.19 +0.03
–0.05
0.50
24
0.08 M
1.0
8.10 ± 0.20
0.65 Max
*Dimension including the plating thickness
Base material dimension
0.13 ± 0.05
0.10
*0.17 ± 0.05
0.15 ± 0.04
1.20 Max
0° – 8°
0.50 ± 0.1
Hitachi Code
JEDEC
EIAJ
Weight (reference value)
TTP-48DB
—
—
0.20 g
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
: http:semiconductor.hitachi.com/
Europe
: http://www.hitachi-eu.com/hel/ecg
Asia (Singapore)
: http://www.has.hitachi.com.sg/grp3/sicd/index.htm
Asia (Taiwan)
: http://www.hitachi.com.tw/E/Product/SICD_Frame.htm
Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm
Japan
: http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe GmbH
Electronic components Group
Dornacher Stra§e 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 778322
Hitachi Asia Pte. Ltd.
16 Collyer Quay #20-00
Hitachi Tower
Singapore 049318
Tel: 535-2100
Fax: 535-1533
Hitachi Asia Ltd.
Taipei Branch Office
3F, Hung Kuo Building. No.167,
Tun-Hwa North Road, Taipei (105)
Tel: <886> (2) 2718-3666
Fax: <886> (2) 2718-8180
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower, World Finance Centre,
Harbour City, Canton Road, Tsim Sha Tsui,
Kowloon, Hong Kong
Tel: <852> (2) 735 9218
Fax: <852> (2) 730 0281
Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.