HITTITE HMC128G8

HMC128G8
v01.0701
MICROWAVE CORPORATION
GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz
Typical Applications
Features
The HMC128G8 is ideal for:
Conversion Loss: 10 dB
• Base Station
LO to RF and IF Isolation: >30 dB
• MMDS
High Third-Order Intercept: +18 dB
• WirelessLAN
• Wireless Local Loop
Functional Diagram
The HMC128G8 is a miniature double-balanced
mixer in a hermetic surface mount package that
can be used as an upconverter or downconverter. The device is a passive diode/balun type
mixer with high dynamic range. Noise figure is
essentially equal to the conversion loss. The
mixer can handle larger signal levels than most
active mixers due to the high third order intercept.
MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and
LO/IF isolations.
12
MIXERS - SMT
General Description
Electrical Specifications, TA = +25° C, LO Drive = +15 dBm
Parameter
Min.
Frequency Range, RF & LO
Frequency Range, IF
12 - 2
Typ.
Max.
Units
1.8 - 5.0
GHz
DC - 2
GHz
Conversion Loss
10
12
dB
Noise Figure (SSB)
10
12
dB
LO to RF Isolation
28
40
dB
LO to IF Isolation
20
30
dB
IP3 (Input)
13
18
dBm
IP2 (Input)
35
40
dBm
1 dB Gain Compression (Input)
5
10
dBm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC128G8
v01.0701
MICROWAVE CORPORATION
GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz
Conversion Gain
Isolation
0
RF/IF
-10
-5
LO= +15dBm
ISOLATION (dB)
-10
LO= +10dBm
-15
-20
0
1
2
3
4
RF FREQUENCY (GHz)
-20
-30
LO/IF
-40
LO/RF
-50
-60
5
6
0
1
2
3
4
5
6
FREQUENCY (GHz)
Distortion and 1dB
Compression vs. LO Drive Level
Return Loss
0
RETURN LOSS (dB)
Distortion
-5
LO
Drive
IF
-10
LO
RF(f1) = 3.01 GHz
RF(f2) = 3.00 GHz
LO = 3.5 GHz
RF Level = 0 dBm
1 dB
Compression
(dBm)
IP3 (dBm)
IP2 (dBm)
P1dB (dBm)
+10
16
38
8
+13
18
40
10
+15
18
40
10
RF
-15
-20
0
1
2
3
4
FREQUENCY (GHz)
5
6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12
MIXERS - SMT
CONVERSION GAIN (dB)
0
12 - 3
MICROWAVE CORPORATION
HMC128G8
v01.0701
GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz
Absolute Maximum Ratings
LO Drive
+27 dBm
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +125 °C
12
MIXERS - SMT
Outline Drawing
NOTES:
1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS.
2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING).
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 50 MICROINCHES MIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
12 - 4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
v01.0701
HMC128G8
GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz
Evaluation PCB
MIXERS - SMT
12
List of Material
Item
Description
J1 - J3
PC Mount SMA RF Connector
U1
HMC128G8 Mixer
PCB*
104880 Evaluation Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 5