HT82V804 CCD 4CH Vertical Driver Features · Operating voltage: 3.0V~5.5V - 2-level output: 1 circuit for shutter driver output voltage level (typ.) = -9V to 15V · Built-in seven circuits - 2-level output: · Switchable between NTSC (EIA) and PAL (CCIR) 2 circuits for vertical CCD clock driver output voltage level (typ.) = -9V to 0V - 3-level output: 2 circuits for vertical CCD clock driver output voltage level (typ.) = -9V to 15V modes · 16-pin SSOP (150mil) package General Description HT82V804 is a CMOS vertical clock driver and shutter driver IC for CCD area sensors. It has the capability of converting the voltage and impedance from the CMOS level. Block Diagram V S S V H P O F D O F D X V L V 2 V 2 X V 1 X V 1 A V H 1 A X V M E V 3 X V 3 A V H 3 A X V 4 X V 4 Pin Assignment V S S 1 1 6 V H O F D X 2 1 5 P O F D V 2 X 3 1 4 V L V 1 X 4 1 3 V 2 V H 1 A X 5 1 2 V 1 A V 3 X 6 1 1 V M E V H 3 A X 7 1 0 V 3 A V 4 X 8 9 V 4 H T 8 2 V 8 0 4 1 6 S S O P -A Rev. 1.00 1 April 15, 2004 HT82V804 Pin Description Pin No. Pin Name I/O ¾ Description 1 VSS Negative power supply, ground 2 OFDX I Electronic shutter pulse input 4, 3, 6, 8 V1X, V2X, V3X, V4X I Vertical transfer pulse input 5, 7 VH1AX, VH3AX I Pulse that transfers the charge of the photo-diode to the vertical shift register. 9 V4 O Pulse to drive vertical CCD shift register (2 level: VME, VL) 10 V3A O Pulse to drive vertical CCD shift register (3 level: VME, VL, VH) 11 VME ¾ Power supply for intermediate level of V1A, V3A 12 V1A O Pulse to drive vertical CCD shift register (3 level: VME, VL, VH) 13 V2 O Pulse to drive vertical CCD shift register (2 level: VME, VL) 14 VL ¾ Power supply for all low level output pulses 15 POFD O Electronic shutter pulse output (2 level: VL, VH) 16 VH ¾ Power supply for high level of V1A, V3A Absolute Maximum Ratings Supply Voltage .............................VSS-0.3V to VL+35V Storage Temperature ...........................-55°C to 150°C Input Voltage ...............................VSS-0.3V to VH+0.3V Operating Temperature ..........................-25°C to 70°C Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Recommended Operating Conditions Symbol Parameter VDD VH Supply Voltage VL VME V1A, V2, V3A, V4, POFD Output Voltage Value Unit 3.0 ~ 5.5 V -0.3 ~ VL+35 V 0 ~ -10 V VL-0.3 ~ 3.0 V VL-0.3 ~ VH+0.3 V Logic Function Table Input Output V1X, V3X VH1AX, VH3AX V2X, V4X OFDX V1A, V3A V2, V4 POFD ¾ ¾ L L ¾ ¾ VH H L ¾ ¾ Z ¾ ¾ L H ¾ ¾ VME ¾ ¾ H H ¾ ¾ VL ¾ ¾ ¾ ¾ L ¾ ¾ VME ¾ ¾ ¾ H ¾ ¾ VL ¾ ¾ ¾ ¾ L ¾ ¾ VH ¾ ¾ ¾ H ¾ ¾ VL Rev. 1.00 2 April 15, 2004 HT82V804 D.C. Characteristics Symbol Parameter VH=15V, VL=-9V, VME=0V, Ta=25°C Test Conditions Min. Typ. Max. Unit VDD Logic Supply Voltage ¾ 3.0 3.3 5.5 V VH Supply Voltage ¾ 14.5 15 15.5 V VL Supply Voltage ¾ -9.5 -8.5 -7.5 V VIH High Level Input Voltage ¾ 2.3 ¾ ¾ V VIL Low Level Input Voltage ¾ ¾ ¾ 1.2 V ¾ 2.0 3.5 mA ¾ 4.5 5.0 mA ¾ -6.5 ¾ mA IVH IVL Operating Current Shutter speed=100kHz IVME IOL V1A, V2, V3A, V4=-9.0V ¾ 37 ¾ mA IOM1 V1A, V2, V3A, V4=-0.5V ¾ -15 -10 mA V1A, V3A=0.5V ¾ 13.5 ¾ mA IOH V1A, V3A=14.5V ¾ -18 -12 mA IOSL OFDX=-8.0V ¾ 18 ¾ mA IOSH OFDX=14.5V ¾ -10.5 -7 mA IOM2 Output Current A.C. Characteristics Symbol Parameter Ta=25°C Test Conditions Min. Typ. Max. Unit tPLM VH=15V, VL=-8.5V, VME=0V ¾ 40 80 ns tPMH VH=15V, VL=-8.5V, VME=0V ¾ 30 80 ns VH=15V, VL=-8.5V, VME=0V ¾ 40 120 ns tPML VH=15V, VL=-8.5V, VME=0V ¾ 100 240 ns tPHM VH=15V, VL=-8.5V, VME=0V ¾ 100 210 ns tPHL VH=15V, VL=-8.5V, VME=0V ¾ 60 120 ns tTLM VH=15V, VL=-8.5V, VME=0V ¾ 700 1110 ns tTMH VH=15V, VL=-8.5V, VME=0V ¾ 650 1110 ns VH=15V, VL=-8.5V, VME=0V ¾ 50 120 ns tTML VH=15V, VL=-8.5V, VME=0V ¾ 300 600 ns tTHM VH=15V, VL=-8.5V, VME=0V ¾ 600 980 ns tTHL VH=15V, VL=-8.5V, VME=0V ¾ 50 120 ns tPLH tTLH Rev. 1.00 Delay Time Rising Time 3 April 15, 2004 HT82V804 Timing Diagrams V 5 V , V 1 X V 2 X , V 3 X 5 0 % 4 X G N D 5 0 % (0 .0 V ) 5 V V H , V H 1 A X 5 0 % 3 A X G N D (0 .0 V ) V tP L M tT (1 5 .0 V ) H tT V 1 A , V V 3 A M E V V 2 , V (0 .0 V ) M E tP L M tP M H tT 9 0 % M H 1 0 % 9 0 % H M H M tP 9 0 % tT (0 .0 V ) tP L M M L 9 0 % tP tT M L 1 0 % 1 0 % (- 9 .0 V ) L V 5 0 % H L L M 1 0 % tT 9 0 % H L 9 0 % 4 L 1 0 % 1 0 % (- 9 .0 V ) V 5 V O F D X 5 0 % G N D 5 0 % (0 .0 V ) tP tP L H tT V (1 5 .0 V ) H V L tT L H 9 0 % P O F D H L 1 0 % (- 9 .0 V ) H L 9 0 % 1 0 % Application Circuits V 1 3 4 V H P O F D V L V 2 V 1 X X V 1 5 6 X V 3 Rev. 1.00 (1 5 V ) (-9 V ) V 2 X X S G 1 T im in g G e n e r a to r L O F D X X V 2 X V 4 H V S S 2 X S U B X S G 3 V 8 7 V H 1 A X V 1 A V 3 X V M E V H 3 A X V 3 A V 4 X V 4 H T 8 2 V 8 0 4 1 6 1 m F 1 5 1 4 1 3 0 .1 m F V S U B V 2 1 2 V 1 1 1 1 0 9 V 3 V 4 C C D 4 April 15, 2004 HT82V804 Equivalent Circuits V 1 5 0 0 p F V 2 7 W 1 5 0 0 p F 2 7 W 1 A 2 7 W 2 7 W 1 5 0 0 p F 2 3 3 0 0 p F V 4 P O F D 1 5 0 0 p F 3 3 0 0 p F 3 3 0 0 p F V 5 0 0 p F 3 A 3 3 0 0 p F 5 W Rev. 1.00 5 April 15, 2004 HT82V804 Package Information 16-pin SSOP (150mil) Outline Dimensions 9 1 6 A B 1 8 C C ' G H D E Symbol Rev. 1.00 a F Dimensions in mil Min. Nom. Max. A 228 ¾ 244 B 150 ¾ 157 C 8 ¾ 12 C¢ 189 ¾ 197 D 54 ¾ 60 E ¾ 25 ¾ F 4 ¾ 10 G 22 ¾ 28 H 7 ¾ 10 a 0° ¾ 8° 6 April 15, 2004 HT82V804 Product Tape and Reel Specifications Reel Dimensions D T 2 A C B T 1 SSOP 16S Symbol Description Dimensions in mm A Reel Outer Diameter 330±1.0 B Reel Inner Diameter 62±1.5 C Spindle Hole Diameter 13.0+0.5 -0.2 D Key Slit Width 2.0±0.5 T1 Space Between Flange 12.8+0.3 -0.2 T2 Reel Thickness 18.2±0.2 Rev. 1.00 7 April 15, 2004 HT82V804 Carrier Tape Dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 SSOP 16S Symbol Description Dimensions in mm W Carrier Tape Width 12.0+0.3 -0.1 P Cavity Pitch 8.0±0.1 E Perforation Position 1.75±0.1 F Cavity to Perforation (Width Direction) 5.5±0.1 D Perforation Diameter 1.55±0.1 D1 Cavity Hole Diameter 1.5+0.25 P0 Perforation Pitch 4.0±0.1 P1 Cavity to Perforation (Length Direction) 2.0±0.1 A0 Cavity Length 6.4±0.1 B0 Cavity Width 5.2±0.1 K0 Cavity Depth 2.1±0.1 t Carrier Tape Thickness C Cover Tape Width Rev. 1.00 0.30±0.05 9.3 8 April 15, 2004 HT82V804 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shanghai Sales Office) 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China 200233 Tel: 021-6485-5560 Fax: 021-6485-0313 http://www.holtek.com.cn Holtek Semiconductor Inc. (Shenzhen Sales Office) 43F, SEG Plaza, Shen Nan Zhong Road, Shenzhen, China 518031 Tel: 0755-8346-5589 Fax: 0755-8346-5590 ISDN: 0755-8346-5591 Holtek Semiconductor Inc. (Beijing Sales Office) Suite 1721, Jinyu Tower, A129 West Xuan Wu Men Street, Xicheng District, Beijing, China 100031 Tel: 010-6641-0030, 6641-7751, 6641-7752 Fax: 010-6641-0125 Holmate Semiconductor, Inc. (North America Sales Office) 46712 Fremont Blvd., Fremont, CA 94538 Tel: 510-252-9880 Fax: 510-252-9885 http://www.holmate.com Copyright Ó 2004 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek¢s products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.00 9 April 15, 2004