Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet Designation System: CA 06 P 4 S...A 17 LC G K2 = Chip Array = Dimensions of the device 06x12 (Length x width in 1/100 inch) = Design (Parallel internal structure) = Number of elements = Special tolerance A of the varistor voltage = Max. operating voltage = Low Capacitance = Taped version (blister tape, 7” reel, 3000 pieces/reel) = Silver-platinum termination (Ag/Pt) Figure: l= b= s= d= e= 3,2 ± 0,2 1,6 ± 0,15 0,9 max. 0,4 ± 0,15 0,76 ± 0,15 Coplanarity < 0.1 (All dimensions in mm) As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 1/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet V-I-Characteristic: VAR9436A 200 V v 100 80 60 40 20 10 8 6 4 2 1 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 A 10 3 i Derating Field: 10 3 A i max i max tr 2 10 5 1 1x 10 5 10 2 2 3 10 4 5 10 10 6 10 10 0 ∞ 5 10 10 -1 10 5 100 5 1000 5 µs 10000 tr ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 2/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet Electrical Data Max. operating voltage RMS voltage DC voltage Veff = 17 V VDC = 22 V Varistor voltage (@ 1 mA) VV = 25 - 40 V Max. clamping voltage (@ 1 A) VC = 50 V Max. average power dissipation Pmax = 3 mW Max. surge current (8/20 µs) Îmax = 1 x 30 A Max. energy absorption (2 ms) Emax = 1 x 0.075 J Capacitance (@ 1MHz, 0.5 V) < 75 pF Response time < 0.5 ns Operating temperature -30 ... +85 °C Storage temperature (mounted parts) -40 ... +125 °C Termination material AgPt (thickness not specified, adjusted to fulfill wettability specification acc. to IEC 60068-2-58) Part weight 0.02 g Max. current, energy, operating voltage and average depending on ambient temperature % 100 90 80 70 60 50 40 30 20 10 0 -55 ISSUE DATE 12.07.02 70 80 ISSUE 90 100 110 120 Ambient temperature e 130 PUBLISHER 140 150 °C KB VS PE PAGE 3/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet Recommended Geometry of Solder Pads E A B A = 0,5 mm B = 0,7 mm C = 1,2 mm E = 0,76 mm C Recommended Soldering Temperature Profiles 300 °C 250 T 200 ca. 225 °C ca. 40 s 180 °C ca. 100 s 150 100 max 2°C/s 50 0 0 50 100 150 200 s 250 t This component is only suited for IR-soldering at relatively low temperatures and must not be wave soldered because of dissolution of the metallization! Max. reflow temperature: 235° C, 30 sec 220° C, 45 sec. Max. reflow cycles: 2x. As far as possible, the components shall be employed within 6 months. They should be left in their original packings to avoid soldering problems due to oxidized contacts. Storage temperature: -25 to 45°C Relative humidity: <75% annual average, <95% on max. 30 days in a year. The usage of mild, non activated fluxes for soldering is recommended, as well as a proper cleaning of the PCB. ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 4/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet Taping According to IEC 60286-3 P 0 T P 2 E D 0 F B 0 W Dimensions and tolerances G Tape material: plastic embossed T 1 T A 0 1 P1 T 2 Direction of unreeling Definition Symbol Dim. Tolerance Compartment width A0 1.9 ± 0.2 Compartment length B0 3.5 ± 0.2 Compartment height K0 1.3 max. Sprocket hole diameter D0 1.5 +0.1 /-0 Compartment hole diameter D1 1.0 min. Sprocket hole pitch P0 4.0 ± 0.1 1) Distance center hole to center compartment P2 2.0 ± 0.05 Pitch of the component compartments P1 4.0 ± 0.1 W E 8.0 ± 0.3 1.75 ± 0.1 F T2 3.5 2.5 Tape width Distance edge to center of hole Distance center hole to center compartment Overall thickness 1) ± 0.05 max. ≤ ± 0.2 mm over any 10 pitches Tape end (trailer) l l 40 min. empty cavities Leader l 25 min. empty cavities ISSUE DATE 12.07.02 ISSUE e PUBLISHER 300 mm cover tape KB VS PE PAGE 5/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination CA06P4S17ALCGK2 B72728A2170S162 Data sheet Package Each reel in airtight plastic bag with desiccant bag. Dimensions approx. 220 x 200 mm. Package: 8 mm tape Reel material: plastic Definition Reel diameter Reel width (inside) Reel width (outside) Symbol A W1 Dim. 180 8.4 Tol. -2 +1.5 /-0 W2 14.4 max. EPCOS AG 2002. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 6/6