PRODUCT SPECIFICATION HDR12864 128x64 GRAPHICS OLED DISPLAY MODULE HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 1 OF 9 HDR12864 DATE: 8/27/02 1. MECHANICAL DATA NO 1 2 3 4 5 6 7 8 9 10 ITEM Dot matrix Dot size Dot pitch Aperture rate Active area View area Panel size Panel thickness Module size Weight HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK SPECIFICATION 128 (W) x 64 (H) 0.48 (W) x 0.48 (H) 0.52(W) x 0.52(H) 85 66.82(W) x 33.34(H) 68.5(W) x 35.3(H) 86(W) x 52.2(H) 2.15 (with polarizer) 93(W) x 70(H) x 8.5(T) - REV.: 1.1 UNIT dot mm mm % mm mm mm mm mm g SHEET 2 OF 9 HDR12864 DATE: 8/27/02 2. MAXIMUM RATING OF MODULE ITEM Supply voltage (Vcc) Input output pin voltage Operating temp. Storage temp Operating life time Storage life time MIN MAX UNIT COMMENT -0.3 5.5 V Ta=25 °C -0.3 Vcc+0.3 V Ta=25 °C -20 70 °C -40 85 °C 10,000 Hours Ta=25 °C 20,000 Hours Ta=25 °C Note: Operation life time condition: @ 11 V HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 3 OF 9 HDR12864 DATE: 8/27/02 3. ELECTRICAL CHARACTERISTICS OF DRIVER IC D.C ELECTRICAL CHARACTERISTICS SYMBOL PARAMETERS VCC Operating voltage ICC Operating current VIH VIL Input high voltage Input low voltage Segment on output current Row on output current Input Leakage current ISEGOH IROWOL ILI TEST CONDITION MIN TYP. MAX UNIT 4.5 5.0 VCC=5V XSCL=1MHZ No output load VSEGOH= 7V VROWOL= 0.4V VCC=5V 2.4 0 -30 5.5 V 1 mA VCC 0.8 -300 100 2 V V uA mA uA A.C ELECTRICAL CHARACTERISTICS SYMBOL TSD TDH TWCP TCL TWLD TCDH TLSEG TLCOM PARAMETERS Data latch in setup time Data latch in hold time XSCL pulse cycle time XSCL low to LP high LP high width Common scan pulse latch hold time LP low to segment outputs LP low to common outputs HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK MIN. 50 50 140 20 140 50 200 10 TYP. REV.: 1.1 MAX. UNIT ns ns ns ns ns ns ns ns SHEET 4 OF 9 HDR12864 DATE: 8/27/02 4. ELECTRO-OPTICAL CHARATERISTICS OF MODULE GENERAL ELECTRICAL SPECIFICATION Minimum luminance (with circular polarizer) Forward voltage Duty Frame rate 30 cd/m2 11 V 1/64 120 Hz PULSED ELECTRICAL SPECIFICATIONS AND OPTICAL CHARACTERISTICS PARAMETER MIN TYP. MAX UNITS COMMENTS V Initial All pixels on All pixels on whole module Forward voltage 11 Ivp 10 15 mA Ivcc 26 30 mA Emissive power 90 135 consumption Pixel luminance 30 35 Peak emission frequency 524 Emission frequency 503-553 range Pixel color coordinates 0.23 0.28 0.30 0.62 0.67 0.71 Dark room contrast >1:100 Viewing angle uniformity >160 mW cd/m nm nm All pixels on 2 Display average Green 1/2 max intensity x, y (CIE 1931) Degree . Note:Optical Measurment taken at 1/64 duty, 120Hz frame rate HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 5 OF 9 HDR12864 DATE: 8/27/02 5. FUNCTION BLOCK DIAGRAM D0-D7 d0-d7 D0-D7 ad0-ad12 r/w WR WR RD ce I/O1-I/O2 A0-A12 R/W CE RD CE CE C/D RST C/D FS1 ED T6963C RST HSCP FS1 LP Col-Driver CDATA C1 - C128 4MHz Vcc Vp DC-DC Vcc Row- Driver R1-R64 OLED PANEL 128 x 64 GND Power Supply (alternative Vp) HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 6 OF 9 HDR12864 DATE: 8/27/02 6. PIN ASSIGNMENTS PIN DESCRIPTION Pin Name Pin No. Description GND 1 Power supply (0V) VCC 2 Power supply (5V) NC 3 No connection WR =L C/ D= H: Command write C/D=: H Data write C/D 4 RD =L C/ D= H: Status read C/D= H: Data read WR 5 Data write. RD 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Data read. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Data I/O pin between CPU and T6963C. Chip enable for T6963C. No connection H: Normal mode. L: Initialize T6963C. No connection No connection Sleep mode controller(Active:Low) DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 CE NC RST NC NC DISB HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 7 OF 9 HDR12864 DATE: 8/27/02 7. RELIABILITY TEST ITEM High Temp operation Low Temp operation High Temp & High Humi. storage High Temp & High Humi. operation TEST CONDITION 60°C ; 24 hours -40°C ; 24 hours 85 °C/85%RH ; 24hours 65 °C/90%RH ; 24hours -40°C, +85°C 30 minutes dwell, 180 seconds transition; 20 cycles Function test OK Thermal shock Criteria for Pass/Fail Note: After test 2 hours (room temperature), check function & appearance. HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 8 OF 9 HDR12864 DATE: 8/27/02 8. EXTERNAL DIMENSION HANTRONIX, INC. 10080 BUBB RD. CUPERTINO, CA 95014 Q.A.: JK REV.: 1.1 SHEET 9 OF 9 HDR12864 DATE: 8/27/02