JZX-140FF MINIATURE INTERMEDIATE POWER RELAY Features File No.:E133481 • 10A switching capabilities • DPST-NO File No.:R9659298 • 5KV and DPDT configurations dielectric between coil to contacts • Sealed & Unsealed types available File No.:CH0023315-2002A CONTACT DATA COIL Contact Arrangement Initial Contact Resistance Max. 2A, 2C Coil power 0.55W 50m (1A 24VDC) Contact Material AgCdO Contact Rating (Res. Load) 5A 220VAC/30VDC General Purpose Power Relays Max. switching voltage 250VAC/30VDC Max. switching current 10A Max. switching power COIL DATA Nominal Pick-up Voltage Voltage VDC VDC Drop-out Voltage VDC 2500VAC/300W Max. Coil allowable Resistance Voltage VDC(at 20 ) JZX-140FF 3 2.25 0.3 3.9 17 10% 5 3.75 0.5 6.5 47 10% TV-3, 125VAC 6 4.50 0.6 7.8 68 10% 5A 250VAC/30VDC 9 6.75 0.9 11.7 160 10% Mechanical life 1 x 107OPS 12 9.00 1.2 15.6 275 10% Electrical life 1 x 105OPS 18 13.5 1.8 23.4 650 10% 24 18.0 2.4 31.2 1100 10% 48 36.0 4.8 62.4 4170 10% 60 45.0 6.0 78.0 7000 10% 10A 250VAC/30VDC 8A 30VDC UL/CUR rating TUV rating CHARACTERISTICS Initial Insulation Resistance Between coil and Contacts Dielectric Between contacts sets Strength Between open contacts 1000M , 500 VDC 5000VAC 1min. 3000VAC 1min. 1000VAC 1min. Surge Voltage betweenContacts and coil 10000V(at 1.2 x 50 µs) Operate time (at nomi. Volt.) 15ms Release time (at nomi. Volt.) 5ms 98%, +40 Humidity Ambient temperature Shock Resistance Vibration Resistance -40 to +70 Functional 100 m/s2 Destructive 1000 m/s2 1.5mm, 10 to 55Hz Termination PCB Unit weight Approx. 18g Construction Sealed & Unsealed HONGFA RELAY ISO9001/QS9000/ISO14000 CERTIFIED 86 Note:When require pick-up voltage < 75% of nominal voltage, special order allowed. ORDERING INFORMATION JZX-140FF / 012 2H S Type Coil voltage 3,5,6,9,12,18,24, 48, 60VDC Contact arrangement 2H:2 Form A 2Z:2 Form C Structure Nil: Unsealed S: Sealed OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 2H 2HS 13max. 13max. 0.3 0.5 1 4 4 25.5max. 4 1 0.3 0.5 1 Wiring Diagram 2Z 2H(S) 4 NO COM NC COM PCB layout 1 20 5 2.1 20 2.1 7.5 7.5 5 5 6-Ø1.3 8-Ø1.3 CHARACTERISTICS CURVE COIL TEMPERATURE RISE MAXIMUM SWITCHING POWER LIFE CURVE 100 60 50 UL load AC Resistive 100 50 10 250VAC Inductive Load (cosø=0.4) 5 0 2 3 4 Contact Current (A) 5 6 AC Resistive Load 10A 5A 0A ) 250VAC/30VDC Resistive Load 40 10 Temperature( Contact Current (A) Operations (X10000 OPS) 500 5 DC Resistive Load AC Inductive Load(p.f=0.4) 1 DC Inductive Load L/R=7ms 30 20 10 10 100 Contact Voltage (V) 1000 0 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage 87 JZX-140FF 25.5max. NO 0.3 0.5 2Z(S) 13max. 29max. General Purpose Power Relays 0.3 0.5 2ZS 29max. 13max. 25.5max. 29max. 25.5max. 29max.