ETC MSM486SL2

MICROSPACE PC/104
486CPU-66MHz
MSM486SL
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AMD Elan™SC400, 3.3V, 66MHz
Video: LCD (CGA, ¼ VGA) STN 8bit
DRAM: 2, 8, (16)MB (soldered)
1st Level Cache: 8kBytes
SSD: DIL Socket for DOC2000
IDE (ISA): Hard Drive, Flash
Floppy Disk Interface (3.5”)
COM1, COM2, COM3
LPT1 bi-directional
LCD Character Interface
Key Matrix Scanner
RTC with Back-up Li-Battery
Watchdog with Power Failure Detection
Power Management (Suspend)
Form Factor: PC/104
BUS PC/104
EEPROM for Setup Values
Operating Temperature: -25°C to +70°C
Extend. Temp.: -40°C to +85°C (33MHz)
available
Description
Ordering Information
The low power, low cost 486 CPU MSM486SL
integrates all functions of a standard PC on one
board, except CRT, though a STN flat panel
(monochrome) can be connected — the
adjustable LCD-BIAS voltage generator is onboard. Most remarkable is its low power
consumption (5V only) and wide operating
temperature range — no cooling needed. Power
management and a programmable watchdog
timer are standard. The operating system and
the application program can be booted from
floppy disk, hard disk, or an optional SSD (DOC)
with up to 144MB flash memory, which can be
programmed on-board. In addition, an IDE flash
disk 16MB (no FFS needed) can be connected to
the IDE port and directly mounted onto the board.
Besides a AT/PS2 keyboard controller, a key
matrix scanner (8 x 16) is on-board. The CPU
runs on operating systems such as MS-DOS,
Windows, Windows NT, Windows CE (min.
DRAM 8MB), and real time systems such as
QNX or Linux, to name a few. Min. quantities of
50 units per order are required for extended
temperature range and coating.
Item codes
MSM486SL2
MSM486SL8
MSM486SL16
Options
MSM486SVPC
Part #
Desription
801088
Board mounted, dual slot PCMCIA adapter
801102
801108
801116
486 CPU, 2MB DRAM, CGA-1/4VGA, no CRT/LCD
486 CPU, 8MB DRAM, CGA-1/4VGA, no CRT/LCD
486 CPU, 16MB DRAM, CGA-1/4VGA, no CRT/LCD
Solid State Flash Disk (32 pin DIL) - DiskOnChip
MD-2800-D08
MD-2202-D16
MD-2200-D24
MD-2202-D32
MD-2202-D48
MD-2202-D72
MD-2202-D96
MD-2203-D144
MD-2203-D192
MD-2203-D224
MD-2203-D288
IDE Flash Modules
DiskOnChip “Millenium”, 8MB
DiskOnChip 2000, 16MB
DiskOnChip 2000, 24MB
DiskOnChip 2000, 32MB
DiskOnChip 2000, 48MB
DiskOnChip 2000, 72MB
DiskOnChip 2000, 96MB
DiskOnChip 2000, 144MB
DiskOnChip 2000, 192MB
DiskOnChip 2000, 224MB
DiskOnChip 2000, 288MB
MSFLASH16
MSFLASH32
MSFLASH64
080509
808532
808564
IDE Flash Disk 16MB (2" x 1.2" x 0.5")
IDE Flash Disk 32MB (2" x 1.2" x 0.5")
IDE Flash Disk 64MB (2" x 1.2" x 0.5")
MSM-CK
802605
Cable kit, including cable for 1.8"/2.5" Hard Drive
Cables
MSM486SL
Technical Specifications
Features
General
Functions
Remarks
Options
CPU
Clock Frequency
Math. Co-processor
DRAM
Solid State Disk
DMA/IRQ Available
Cache (Level 1)
Counters/Timers
Zero Wait State Signal
Watchdog Timer
Setup Saves
BUS System
AMD ElanSC400
66MHz
none
2, 8, (16) MB
32-pin DIL-Socket for DOC
1 DMA (8bit); 2 IRQ (programmable)
8kB Write-back
3 programmable
not available
Enable/disable (softw.); power fail indication
EEPROM 2kB (1kB for user)
PC/104
Video Controller
Mode
Resolution
Video Memory
Bias-Voltage LCD
LCD-Character Interface
Hard Disk Controller
Floppy Disk Controller
Serial Ports
Parallel Port
Keyboard Controller
KB-Matrix Controller
Mouse
CGA, ¼ VGA (monochrome)
Flat Panel, 8bit STN
320 x 240 monochrome
UMA
On-board (-18V to -30V)
8 bit (bi-directional)
IDE, AT-Type (1.3”/1.8”/2.5” Hard Disk)
3.5”, micro floppy
COM1: RS485
COM2/3: RS232C
LPT1 (SPP, EPP bi-directional)
AT or PS2
8 x 16 keys
PS/2
Power Requirement
Power Management
RTC Back-up Battery
5V/510mA (typical)
Suspend: 5V/350mA
Lithium 220mAh on-board
2MB
2MB
Approx. 5 years
Dimensions
Weight
MTBF
3.8” x 3.6” x 0.5” (96x90x11mm)
2.3 oz. (65g)
200,000 hours
from Surface
Operating Temperature
Extended Temperature
Storage Temperature
Relative Humidity
Vibration
Shock
-25°C to 70°C
-40°C to +85°C (33MHz) available
-55°C to +85°C
5 - 90% non-condensing
5 to 2000Hz
10 G
Burn-in; no cooling
min. qty.
PC-Interfaces
Electrical
Physical Characteristics
Operating Environment
Manufacturer
USA Distributor & Support Center
DIGITAL-LOGIC AG
Nordstrasse 4/F
CH-4708 Luterbach
Switzerland
Advanced Digital Logic, Inc.
4411 Morena Blvd., Suite 230
San Diego, CA 92117-4328
P: 858.490.0597 F: 858.490.0599
Email: [email protected]
http://www.adlogic-pc104.com
33MHz (selectable)
no floating point
soldered
2 to 144MB
customer
no 2nd Level
Strobe 800ms
104 pins
5V or 3.3V
640 x 200 mono
adjustable
44 pins (RM2)
26 pins (FCC)
2 pins
10 pins
1x26 pins
IDE Flash 16MB
Adapt. for reg. floppy
external
Representative
msm486sl rev11/01