SG12864F ( 128 DOTS X 64 DOTS ) ■ FEATURES ■ MECHANICAL DATA ◆ BUILT-IN CONTROLLER (T6963C OR EQUIVALENT) ITEM ◆ +5 V POWER SUPPLY Module Size (W x H x T) ◆ 1/64 DUTY CYCLE Viewing Area ( W x H ) ◆ 8-BIT PARALLEL INTERFACE Active Area ( W x H ) ◆ 4.2 V LED FORWARD VOLTAGE Dot Size ( W x H ) Dot Pitch ( W x H ) ■ INTERFACE PIN CONNECTIONS NO. SYMBOL LEVEL DIMENSIONS UNIT 87.0 x 70.0 x 8.8 ( 12.7 LED ) mm 72.0 x 40.0 mm 66.52 x 33.24 mm 0.48 x 0.48 mm 0.52 x 0.52 mm ■ ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. TYP. MAX. UNIT 1 VSS 0V Power Supply Ground FUNCTION Supply Voltage For Logic VDD-VSS 0 - 7 V 2 VDD 5V Power Supply Voltage Supply Voltage For LCD Drive VDD-Vo 0 - 14 V 3 VO - Contrast Adjustment Voltage Input Voltage VI Vss - VDD V 4 C/D H/L 5 /RD L Write Signal 6 /WR L Read Signal 7~14 DB0~DB7 H/L Data Bus Line 15 /CE L H : Data, L : Instruction Code ■ ELECTRICAL CHARACTERISTICS ITEM SYMBOL CONDITION MIN. TYP. Supply Voltage For Logic VDD-VSS - 4.5 5 5.5 V Enable Signal Supply Voltage For LCD VDD-Vo VDD=5V Ta=25℃ 7.6 8.3 9.2 V Supply Current 16 /RST L Reset Signal 17 Vout - Power Supply Voltage For LCD Input "HIGH" Level MAX. UNIT IDD VDD=5V - 4.5 10 mA VIH - 2.2 - VDD V 18 MD H/L H : 32/ L : 40 Select Of Columns Voltage "LOW" Level VIL - - - 0.6 V 19 FS H/L H : 6*8 , L : 8*8 Select Of Columns Output "HIGH" Level VOH - 2.4 - - V 20 /HLT L Stop The Oscillatuion Of Clock Voltage "LOW" Level VOL - - - 0.4 V ■ EXTERNAL DIMENSIONS SG12864F ( 128 DOTS X 64 DOTS ) ■ TIMING CHARACTERISTICS ITEM C/D Setup Time C/D Hold Time CE, RD,WR Pulse Width Data Setup Time Data Hold Time Access Time Output Hold Time ■ BLOCK DIAGRAM SYMBOL tCDS tCDH tCE, tRD, tWR tDS tDH tACC tOH MIN. MAX. UNIT. 100 - ns 10 - ns 80 - ns 80 - ns 40 - ns - 150 ns 10 50 ns