SG160160B (160 DOTS X160 DOTS ) ■ FEATURES ■ MECHANICAL DATA ◆ BUILT-IN CONTROLLER (SED1335 OR EQUIVALENT ) ITEM DIMENSIONS UNIT ◆ +5 V POWER SUPPLY Module Size (W x H x T) 88.8 x 88.8 x 9.4(13.8) mm ◆ 1/160 DUTY CYCLE Viewing Area ( W x H ) 62.0 x 62.0 mm ◆ EDGE LIGHTING TYPE LED BACKLIGHT Active Area ( W x H ) ■ INTERFACE PIN CONNECTIONS NO. SYMBOL LEVEL 60.76 x 60.76 mm Dot Size ( W x H ) 0.34 x 0.34 mm Dot Pitch ( W x H ) 0.38 x 0.38 mm ■ ABSOLUTE MAXIMUM RATINGS FUNCTION ITEM SYMBOL MIN. TYP. MAX. UNIT Power Supply Ground Supply Voltage For Logic VDD-VSS 0 - 7 V VDD-Vo 0 V Vss - 21 VI VDD V 1 VSS 0V 2 VDD 5V Power Supply Voltage Supply Voltage For LCD Drive 3 Vo - Contrast Adjustment Voltage Input Voltage 4 /RD L Read Signal ■ ELECTRICAL CHARACTERISTICS 5 /WR L Write Signal 6 /CS L Chip Signal 7 Ao H/L Data Type Select 8~15 DB0~DB7 H/L 16 /RES 17 VEE 18 A 4.2V LED Power (+) Voltage 19 K 0V LED Power (-) Output 20 NC - No Connection Voltage "LOW" Level SYMBOL CONDITION MIN. TYP. Supply Voltage For Logic VDD-VSS - 4.5 5 5.5 V Data Bus Line LCD Supply Voltage VDD-Vo VDD=5V Ta=25℃ 17.4 18 24.3 V L Reset Signal Supply Current - Power Supply Voltage For LCD ■ EXTERNAL DIMENSIONS ITEM Input MAX. UNIT IDD VDD=5V - 14 23 mA VIH - 2.2 - VDD V "LOW" Level VIL - - - 0.6 V "HIGH" Level VOH - 2.4 - - V VOL - - - 0.4 V "HIGH" Level SG160160B ( 160 DOTS X 160 DOTS ) ■ TIMING CHARACTERISTICS ITEM System Cycle Time Address Set-up Time Address Hold Time Data Set-up Time Data Hold Time Output Disable Time Access Time Enable Pulse Width Read Write ■ BLOCK DIAGRAM SYMBOL MIN. TYP. MAX. UNIT. tCYC tAW tAH tDS tDH tOH tACC tEW 425 - - ns 30 - - ns 10 - - ns 120 - - ns 10 - - ns 10 - 50 ns - - 120 ns 220 - - ns 220 - - ns