ETC TUD4010

T
Seerrvveerr
dee S
Bllaad
nccee B
maan
orrm
Peerrffo
hP
gh
Hiig
D--44001100 H
UD
TU
((pprreelliim
miinnaarryy SSppeecc -- TTaattuunngg C
Coonnffiiddeennttiiaall))
TThhee hhiigghh ppeerrffoorrm
maannccee bbllaaddee sseerrvveerr ffoorr eenntteerrpprriissee,, ddaattaa cceenntteerr aanndd HHPPCC aapppplliiccaattiioonnss
TTU
UD
D--44001100 S
Syysstteem
mH
Hiigghhlliigghhttss
•
Accommodates up to 10 independent server blades in
a 4U chassis with integrated switch blades and
management blades; delivering up to 100 high
performance dual CPU server blade per rack
•
Modular design helps to reduce the total cost of
ownership.
•
Breakthrough levels of manageability delivered by
Amphus’ ManageSite solution
•
Reduce weight up to 2.6 times per server
•
Ideal for front-end data center applications, application
servers, server farms, grid computing and compute
cluster applications
•
Dual Gigabit Ethernet-Switch Blades enable
! 10:1 Ethernet cable consolidation; eliminating the
cable management problem for IT administrators
!
Separation of front-end client traffic from backend storage traffic
•
3+1 maximum 1800Watts redundant Power Supplies;
designed for peak power consumption
•
Dual high performance fan modules with dual fans
each
•
All blades, power supplies and fan modules are hotswappable
•
Inherent Scalability and Serviceability by virtue of
modular bladed design and hot-swappability
•
High Availability built inmultiple server blades, dual
switch blades, management blades, power supplies
and fan modules, means no single point of failure
•
Support Linux and Windows 2000 and Windows
server 2003
•
Lowest TCO high performance platform for data
centers and high performance computing
THE TUD-4010 DEFINES THE SUPERLATIVE,
NEXT-GENERATION, HIGH PERFORMANCE
BLADE SERVER PLATFORM. Tatung proudly
announces our new Blade server, TUD-4010, to meet the
challenging requirements of data center market.
The
TUD-4010 has been designed to deliver the high CPU
density, high performance, low power consumption,
and high manageability products for data center and
enterprise customers.
High Performance and density TUD-4010 integrates
10 server blades in a 4U chassis, delivering the computing
power of 200 Xeon processors in a standard 42U height
rack up to 2.4 times what is currently achievable with the
“thinnest” 1U servers today. Effective density is even
higher since the TUD-4010 also integrates dual Gigabit
Ethernet switches and dual Management blades, each of
which would normally consume an additional 1U of rack
space.
Low Power Consumption and high performance 
Based on Intel’s LV Xeon 2.4GHz processors, each TUD4010 server blade consumes low power but with the high
performance of a Xeon processor. This power efficiency
not only yields a direct savings in power costs for the data
center, but also reduces air conditioning costs by a similar
factor and minimizes UPS or backup generator
provisioning.
Highest Manageability
TUD-4010-based blade servers
deliver unmatched levels of manageability, through the use
of Amphus’ ManageSite product. Consisting of the
Management blade (that “plugs-in” to the server chassis
just like a server blade) and network-based management
software, ManageSite delivers integrated
! Deployment management
! Platform Management
ManageSite will enable data centers to: (a) reduce capital
expenditure on servers; (b) minimize recurring power costs;
and (c) increase server uptime and availability.
T
Seerrvveerr
dee S
Bllaad
nccee B
maan
orrm
Peerrffo
hP
gh
Hiig
D--44001100 H
UD
TU
TTU
UD
D--44001100 S
Sppeecciiffiiccaattiioonnss
Chassis Overall
•
•
•
•
•
Accommodates hot-pluggable slots:
TUD-4010 Rear View
!
10 Server Blades at the front
!
2 Switch Blades at the rear
!
2 Management Blades at the rear
!
3+1 redundant power supplies at the rear
!
2 (1+1) high performance fan modules at the rear
Passive mid-plane supports dual gigabit LAN and dual
AMPC management
(3+1) Power Supply maximum output: 1800W+600W
!
!
Auto-sensing 110-240V AC
600W maximum rate power per power supply
•
•
•
•
•
•
•
•
•
•
•
CPU: High performance and low power consumption Intel
LV Xeon processor running at 2.4GHz
Memory: Supports up to 8GB of ECC registered DDR266
memory (Four DIMM slots)
Intel chipset: E7501
One low-profile PCI-X Slot
Accommodates single IDE, 2.5” hard disk drive
Dual 1Gbs Ethernet NICsConnect to 2 switch blades
Integrated MCOP (Management CO-Processor): Custom
chip facilitating server blade management by ManageSite
Video controller with VGA and SVGA resolutions
Integrated KVM (USB Keyboard, Video, USB mouse)
connector at frontenables attended installation of OS and
applications
Supports external USB CDROM , flash memory and FDD
Activity indicator LEDsfor CPU, primary and secondary
networks, and HDD
Dimensions: 6.5”(H) x 1.65”(W) x 15.6”(D)
Software
•
•
•
•
•
•
•
Rack mountable 4U chassis: 6.88”(H) x 16.7”(W)
x 27.5”(D)
Weight: 128lbs (Full load); 80lbs (Base unit)
Server Blade Specification (SB4010Xe)
•
Switch Blades Specification
• IEEE Layer 2 Ethernet switch
OS support: Windows™ 2000, Windows Server 2003 and
Linux.
Rapid deployment support: Windows® 2000, Windows
Server 2003 and Linux Redhat™9.0, AS2.1 and AS3.0
PXE-enabled BIOSfacilitates network-based OS and
application installation
Server Management Agent (SMA): Optional software
component works in conjunction with MCOP chip to facilitate
server blade management by ManageSite™
•
•
•
•
•
Supports VLAN, trunking and mirroring
The VLAN and trunking configuration can be done through a
local serial port or remote management software
(ManageSite)
Delivers 10:1 Ethernet cable consolidation for TUD-4010
based servers, eliminating the cable management problem
for data centers
1Gbs ports support:
!
3 RJ45 external uplink ports
!
10 Ser/Des to Server Blades
!
2 Ser/Des to Management Blades
!
1 Ser/Des to the other switch blades
Supports half-duplex and full-duplex communication
Auto-negotiation for speed, flow and duplex control for 1Gbs
ports
Supports IEEE 802.1 and IEEE 802.3x flow control
Up to 2 redundant, hot-swap switch blades
Same switch blade with TUD-3114
Management Blades
•
•
•
•
•
•
•
•
•
•
High performance embedded processor / IO processors for
hardware and routing control
Internal AMPC serial channel (star network) communication
controller to monitor voltage, temperature, speed of each
blade and module. It has the capability to cycle power, shut
down and reset any module.
Two internal Ethernet ports to provide redundant
communication to internal and external networks. One
external Ethernet for remote out of band control
Automatic switch over for high availability
Redirect serial console of any server blade over Ethernet for
remote terminal server function
One DB9 serial port for software installation
Supports Wake on LAN
Up to 2 redundant, hot-swap
Supported by ManageSite™ Software
Same management blade with TUD-3114
T
Seerrvveerr
dee S
Bllaad
nccee B
maan
orrm
Peerrffo
hP
gh
Hiig
D--44001100 H
UD
TU
AApppplliiccaattiioonn ooff BBllaaddee SSeerrvveerr
(B) Terminal Server Farm
" Enterprise Computing
" High Performance Computing
-Bio-informatics and Computational Biology Solutions
Storage
-Computational Search Solutions
-Modeling and Simulation Solution
" Utility Computing
- Computing on Demand
" Grid Computing
" Game Server
" Terminal Server Farm
" Distributed Database Server
" Stream Media Application
-Video On Demand, Music On Demand
" Internet Server Application
-Security, Virus, SPAM, Content Filtering Gateway
" Application and Database Server
Any device, any place, any connection, any information on client
The Blade Server can run multiple applications simultaneously
(C) Server and Storage
Office A
Office B
Office C
Office D
Office E
-ERP, SCM, BI, ECAD, MCAD, GIS
" Front End Server
-Web Server, Mail Server, Ftp Server, etc.
Ser
!Integrated monitoring for a single point
ver
management across all IT systems
/St
!Server site consolidation reduces the number ora
of locations
ge
!Storage consolidation reduces application
software license fees
!Single point of management and data
backup
Application Examples
Serve Storag
The following are a few examples which can illustrate the
advantages of using blade servers to save space, power, weight
and remote management to have a significant saving in the total
cost of ownership (TCO) for corporations and data centers.
Blade
S
(A) Cluster Computing Example
(D ) G r id C o n fig u r a tio n fo r G a m e S e rv e rs
1000 node virtual mesh cluster
Cluster Module 1
Cluster Module n
Cluster Control Module
10 Giga Switch
10 Giga Switch
Dual 2 x 10Gigabit
- 10 TUD-4010 with
Each cluster module is a rack mount cabinet consisting of
100 nodes (200 CPU) or 14 TUD-3114 with 196 nodes
The ManageSite can assist the overall server management for the cluster
control module
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
G a tew a y S er v er
Backbone
Aggregator
SB
a n d F irew a ll
Cluster Mesh
Management
D ata b a se S e rv er
Image Distribution
& Monitor
NAS/SAN
/iSCSI/IB
G a m e se rv e r re sp o n se to ru n g a m e w ith in G rid .
W h e n a g a m e se rv e r is o v e r u tiliz e d o r o u t o f fu n c tio n ,
T h e g a m e m a n a g e m e n t s o ftw a re a b le to sw itc h th e g a m e to n e w se rv e r.
Tatung Science and Technology, Inc. (TSTI
)
436 Kato Terrace, Fremont, CA. 94539, USA
Tel: 510-687-9688; 1-800-659-5902
Fax: 510-687-9588
Email: [email protected]
http:// www.tsti.com
* Features and specifications include standard and optional items and are subject to change without notice.
* All other products or service names mentioned herein are trademarks of their respective owners.