® ® DMS-3019X Series Alternate Source for DP-650 Series, 3½ Digit, LCD Display Digital Panel Voltmeters Actual Size Features DATEL's new DMS-3019X Series, 3½ Digit, LCD Display, Digital Panel Voltmeters provide DP-650 users with a superior-quality alternate source. The DMS-3019X Series input/output connector is pin-compatible with nearly all DP-650 applications. Only minor sheet-metal modifications are needed to attain all the advantages offered by the DMS-3019X Series digital voltmeters. Three differential, high-impedance, input voltage ranges are available: ±200mV (DMS-30193), ±2V (DMS-30194) and ±20V (DMS-30195). Provisions are also included for the addition of custom input-scaling resistors— a feature found only on DMS-3019X meters. Autozero calibration, autopolarity changeover and a factorycalibrated ultra-stable reference circuit are standard. A reliable, epoxy-encapsulated DMS-30LCD digital voltmeter, with large (0.4"/10.2mm) LCD digits, is used in all three models. All internal and external connections are 100% soldered— no elastomeric connectors are used. The DMS-3019X Series offers many noteworthy improvements over its competitors: wider operating temperature range, lower power consumption and higher input impedance, to name a few. And, most importantly, all DATEL digital panel meters are designed and manufactured in the USA! • Replaces DP-650, DP-652 and DP-654 meters • Connects directly to existing wiring • Available in three input ranges: ±200mV, ±2V and ±20V • Low power consumption • Wider operating temperature range (0 to +60°C) • Rugged, epoxy-encapsulated plastic packages • Large (0.4"/10.2mm) LCD displays • Made in the USA! +5V V+ 1 GND R4 ➀ 0.01µF –5V 2 8 V+ R2 ➁ R1 R3 DC/DC CONVERTER V– (–) INPUT LO ➁ 7 (+) INPUT HI 909k ≈+2.0V 3 DP COM 0 Vdc A/D CONVERTER DATA DP 3 DP 2 1.23V REF. 4 GAIN ADJUST 5 +5V DP 1 6 9 DISPLAY TEST ➀ R4 is not used on the ±200mV or ±2V models. R4 = 100k on the ±20V model. ➁ R1 and R2 are user supplied. Figure 1. DMS-3019X Simplified Schematic DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 • E-mail: [email protected] • Internet: www.datel.com DMS-3019X 3½ D I G I T , L C D D I S P L AY D I G I T A L V O L T M E T E R S Mechanical Specifications Electrical Specifications MECHANICAL DIMENSIONS: Inches (mm) Typical at TA = +25°C and supply voltage = +5V. See DMS-30LCD data sheet for more information. TOLERANCES: 2 PL DEC ±0.02 (±0.51) 3 PL DEC ±0.010 (±0.254) LEAD DIMENSIONS: 0.025 (0.635) x 0.025 (0.635) NOMINAL 0.90 (22.9) TYP. 0.10 (2.5) TYP. 10 0.40 (10.2) TYP. 0.040 (1.02) 1 0.025 SQ. (0.635) DMS-30194 0.475 (12.07) TYP. Power Supply (V+ to GND) +5Vdc, ±5% @ 1.2mA max. Full Scale Input See Ordering Information Input Impedance 1 Megohm Sampling Rate 3 Samples per second Accuracy (VIN = +0.190V) ±2 Counts max. (±0.1%) Display Type 3½ Digit LCD, 0.40"/10.2mm high Operating Temperature 0 to +60°C Storage Temperature –20 to +75°C Humidity (Non-condensing) 0-95% BACK VIEW ® MADE IN USA ® 12 0.84 (21.3) 2.09 (53.1) 0.92 (23.4) 2.17 (55.1) R2 0.040 (1.02) ® 1 ® R1 FRONT VIEW 4 5 61 72 3 8 5 6 94 10 DP2 DP1 (+) INPUT (–) INPUT TEST N.C. 3 DP3 V+ 2 GND 6 1 DP COM 7 0.40 (10.2) +5V DP1 DP2 DP3 +5V Power Supply + + – – VIN OPTIONAL BEZEL (DMS-BZL1 and DMS-BZL2) #2-56 INSERT 0.156 (3.96) DEEP FRONT VIEW 0.187 (4.75) Typical Single-ended Connections BEZEL INSTALLATION 1.270 (32.26) 10 1 PANEL ® 2.55 (64.77) MADE IN USA ® RECOMMENDED DRILL AND PANEL CUTOUT DIMENSIONS INTERNAL CORNER RADII: 0.032 (0.81) MAX. 1.07 (27.18) 0.116 (2.95) BEZEL 0.878 (22.30) PANEL CUTOUT RETAINING CLIP INSTALLATION 2.118 (53.80) 2.35 (59.69) 0.093 (2.362) DIAMETER (4 REQUIRED) ONLY WHEN USING OPTIONAL BEZEL ASSEMBLY 0.096 (2.44) 10 1 PANEL Ordering Information MADE IN USA DMS-BZL1 DMS-BZL2 DMS-30-CP ® Bezel assembly Bezel with gasket Panel cutout punch ® ® ±200mV input ±2V input ±20V input ® DMS-30193 DMS-30194 DMS-30195 A panel-mount retaining clip is supplied with all models ISO 9001 R E G I S T E R E D DS-0330A 1/98 DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 Internet: www.datel.com Email: [email protected] Data sheet fax back: (508) 261-2857 DATEL (UK) LTD. Tadley, England Tel: (01256)-880444 DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01 DATEL GmbH München, Germany Tel: 89-544334-0 DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-354-2025 DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.