SME 901-17 The Communications Edge TM Preliminary Product Information Quad-Diode Mixer Product Features • • • • • Functional Diagram 2 1 High IIP3 +29 dBm RF Freq 700 - 980 MHz LO Freq 800 - 1000 MHz IF Freq 20 - 100 MHz LO Drive Level +17 dBm 3 6 Function Ground RF Ground IF Ground LO Pin No. 1-3 4 5 6 7 8 Specifications Parameters RF Frequency LO Frequency IF Frequency Units Minimum MHz MHz MHz 800 700 20 Typical dB 6.2 L-R Isolation L-I Isolation dB dB 40 27 dBm dBm +29 +17 dB dB dB 15 14 18 RF - Return Loss LO - Return Loss IF - Return Loss Comments 1000 980 100 SSB Conversion Loss IIP3 LO Drive Maximum Test conditions unless otherwise noted 1. Tested in a 50 Ohm System, low Side LO. Recommended Maximum Rating Parameters Operating Case Temperature Storage Temperature RF Input Power at 25°C (continuous) Rating -40 to +70 °C -65 to +100 °C +20 dBm Ordering Information Part No. SME 901-17 SME 901-17-PCB Description Diode Mixer (Available in Tape & Reel) Fully Assembled App Ckt. This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com January 2002 SME 901-17 Quad-Diode Mixer The Communications Edge TM Preliminary Product Information This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com January 2002