RGP15A......RGP15MT 1.5 Amp. Glass Passivated Fast Recovery Rectifier Dimensions in mm. DO-15 (Plastic) Voltage 50 to 1000 V. Current 1.5 A. at 55 °C. ® 6.35 ± 0.2 58.5 ± 0.5 Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350 °C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 2 mm. to the body. • Glass passivated junction • High current capability • The plastic material carries U/L recognition 94 V-0 • Terminals: Axial Leads • Polarity: Color band denotes cathode Maximum Ratings, according to IEC publication No. 134 RGP RGP RGP RGP RGP RGP RGP RGP RGP 15A 15B 15D 15G 15J 15K 15KT 15M 15MT VRRM Peak recurrent reverse voltage (V) 50 100 200 400 600 800 800 IF(AV) Forward current at Tamb = 55 °C 1.5 A IFRM Recurrent peak forward current IFSM 8.3 ms. peak forward surge current 10 A 1000 1000 50 A (Jedec Method) IF = 0.5 A IR = 1 A IRR = 0.25 A trr Max. reverse recovery time from Tj Operating temperature range – 65 to + 175 °C Tstg Storage temperature range – 65 to + 175 °C ERSM Maximum non repetitive peak reverse avalanche energy. IR = 1A ; TJ = 25 ºC 20 mJ 150 ns 250 ns 500 ns 300 ns 500 ns 300 ns Electrical Characteristics at Tamb = 25 °C VF Max. forward voltage drop at IF = 1.5 A o IR Rthj-a at 25 C at 150 oC Thermal resistance (I = 10 mm.) Max. Typ. Max. reverse current at VRRM 1.3 V 5µA 200 µ A 50 °C/W 30 °C/W Nov - 02 RGP15A......RGP15MT Rating And Characteristic Curves TYPICAL FORWARD CHARACTERISTIC 10 FORWARD CURRENT DERATING CURVE 2.5 10 mm. - 10 mm. 2 1 1.5 1 Tj = 25 °C 0.1 0.5 0.01 0.6 0 0.8 1 1.2 1.4 1.6 0 25 50 75 100 125 150 175 VF ' instantaneous forward voltage (V) Tamb, ambient temperature (ºC) MAXIMUM NON REPETITIVE PEAK FORWARD SURGE CURRENT TYPICAL JUNCTION CAPACITANCE 100 50 40 30 Tj = 25ºC f = 1 MHz 10 20 10 0 1 1 2 4 6 10 20 40 Number of cycles at 60 Hz. 100 1 5 10 50 100 VR reverse voltage (V) Nov - 02