RGP30A ...... RGP30MT 3 Amp. Glass Passivated Fast Recovery Rectifier Dimensions in mm. DO-201 AD (Plastic) Voltage 50 to 1000 V. Current 3.0 A. at 55 °C. ® 9.1 ± 0.3 62.5 ± 0.5 Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350 °C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 3 mm. to the body. • Glass passivated junction • High current capability • The plastic material carries U/L recognition 94 V-0 • Terminals: Axial Leads • Polarity: Color band denotes cathode Maximum Ratings, according to IEC publication No. 134 RGP 30A RGP 30B RGP 30D RGP 30G RGP 30J RGP 30K RGP RGP 30M 30MT 50 100 200 400 600 800 1000 1000 VRRM Peak recurrent reverse voltage (V) IF(AV) Forward current at Tamb = 55 °C 3A IFRM 30 A IFSM Recurrent peak forward current 8.3 ms. peak forward surge current trr Max. reverse recovery time from Tj Operating temperature range – 65 to + 175 °C Tstg Storage temperature range – 65 to + 175 °C E RSM Maximum non repetitive peak reverse avalanche energy. IR = 1A ; TJ = 25 ºC 125 A (Jedec Method) IF = 0.5 A IR = 1 A IRR = 0.25 A 150 ns 250 ns 20 mJ Electrical Characteristics at Tamb = 25 °C VF Max. forward voltage drop at IF = 3 A IR Max. reverse current at VRRM Rthj-a at 25 oC at 125 oC Thermal resistance (I = 10 mm.) Max. Typ. 1.3 V 5µA 100 µ A 30 °C/W 15 °C/W 500 ns 300 ns RGP30 Rating And Characteristic Curves TYPICAL FORWARD CHARACTERISTIC 10 FORWARD CURRENT DERATING CURVE 5 10 mm. - 10 mm. 4 1 3 2 Tj = 25 °C 0.1 1 0 0.01 0.6 0.8 1 1.2 1.4 1.6 0 VF ' instantaneous forward voltage (V) 25 50 75 100 125 150 175 Tamb, ambient temperature (ºC) MAXIMUM NON REPETITIVE PEAK FORWARD SURGE CURRENT TYPICAL JUNCTION CAPACITANCE 100 250 200 50 150 Tj = 25ºC f = 1 MHz 100 10 50 5 0 1 2 4 6 10 20 40 Number of cycles at 60 Hz. 100 1 5 10 VR reverse voltage (V) 50 100