1N5391 ........ 1N5399 1.5 Amp. Silicon Rectifier Diodes Dimensions in mm. DO-15 (Plastic) Voltage 50 to 1000 V. Current 1.5 A. at 70°C. 6.35 ± 0.2 58.5 min. • Low cost Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350°C. 3. Max. soldering time, 3,5 sec. 4. Do not bend lead at a point closer than 2 mm. to the body. • Diffused junction • High current capability • The plastic material carries U/L recognition 94 V-0 • Terminals: Axial Leads • Polarity: Color band denotes cathode Maximum Ratings, according to IEC publication No. 134 1N 1N 1N 1N 1N 1N 1N 1N 1N 5391 5392 5393 5394 5395 5396 5397 5398 5399 VRRM Peak recurrent reverse voltage (V) IF(AV) Forward current at Tamb = 70°C 1.5 A IFRM Recurrent peak forward current 10 A IFSM 8.3 ms. peak forward surge current 50 A Tj Operating temperature range – 65 to + 150 °C Tstg Storage temperature range – 65 to + 150 °C (Jedec Method) 50 100 200 300 400 500 600 Electrical Characteristics at Tamb = 25°C VF Max. forward voltage drop at IF = 1.5 A 1.2 V IR Max. reverse current at VRRM at 25°C at 150°C 5µA 300 µ A Rthj-a Max. thermal resistance (I = 10 mm.) 60° C/W 800 1000 1N5390 Characteristic Curves FORWARD CURRENT DERATING CURVE TYPICAL FORWARD CHARACTERISTIC 10 mm. - 10 mm. 10 1.5 10 1.2 0 R or L Load 0.9 10 C - Load -1 0.6 Tj = 150°C Tj = 25°C 10 -2 0.3 0 10 0 -3 0 0.6 1.2 1.8 2.4 3.0 3.6 4.2 4.8 5.4 25 50 75 100 125 150 175 Tamb, ambient temperature (°C) VF ' instantaneous forward voltage (V) MAXIMUM NON REPETITIVE PEAK FORWARD SURGE CURRENT THERMAL RESISTANCE 90 100 80 IFM 50 1 cycle 60 20 40 10 20 I I 4 0 2 0 10 20 I, lead lenght (mm.) 30 1 2 4 10 20 Number of cycles at 60 Hz. 100