RGP50A........ RGP50M 5 Amp. Glass Passivated Fast Recovery Rectifier Dimensions in mm. P-6 (Plastic) Voltage 50 to 1000 V. Current 5.0 A. at 55 °C. ® 8.7 ± 0.3 59.5 ± 1 Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350 °C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 4 mm. to the body. • Glass passivated junction • High surge capability • The plastic material carries U/L recognition 94 V-0 • Terminals: Axial Leads • Polarity: Color band denotes cathode Maximum Ratings, according to IEC publication No. 134 RGP 50A RGP 50B RGP 50D RGP 50G RGP 50J RGP 50K RGP 50M 50 100 200 400 600 800 1000 VRRM Peak recurrent reverse voltage (V) IF(AV) Forward current at Tamb = 55 °C 5A IFRM Recurrent peak forward current 8.3 ms. peak forward surge current 60 A IFSM 300 A (Jedec Method) IF = 0.5 A IR = 1 A IRR = 0.25 A trr Max. reverse recovery time from Tj Operating temperature range – 65 to + 175 °C Tstg Storage temperature range Maximum non repetitive peak reverse avalanche energy. IR = 1A ; TJ = 25 ºC – 65 to + 175 °C ERSM 150 ns 250 ns 20 mJ Electrical Characteristics at Tamb = 25 °C VF Max. forward voltage drop at IF = 5 A 1.3 V IR Max. reverse current at VRRM 5µA Rthj-a Max. thermal resistance (I = 10 mm.) at 25 °C 10 °C/W 500 ns RGP50 Rating and Characteristic Curves TYPICAL FORWARD CHARACTERISTIC 10 FORWARD CURRENT DERATING CURVE 5 10mm. - 10mm. 7 4 10 6 10 5 3 4 10 2 3 Tj = 25ºC 2 10 1 1 0 0 0.6 1 1.4 1.8 2.2 2.6 0 VF ' instantaneous forward voltage (V) 25 50 Tamb, ambient temperature (ºC) MAXIMUM NON REPETITIVE PEAK FORWARD SURGE CURRENT 1000 IFM 1 cycle 400 200 100 40 20 1 2 75 100 125 150 175 4 10 20 Number of cycles at 60Hz. 100