• PACKAGE, 1.12 x 0.81 x 0.33 INCH • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED • 2:1 WIDE INPUT VOLTAGE RANGE • LOW RIPPLE & NOISE • FIVE-SIDED SHIELD • OVER CURRENT PROTECTION • SHORT CIRCUIT PROTECTION • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR The TEM03 series offer 3 watts of output power from a 1.12 x 0.81 x 0.33 inch package without derating to 50ºC and without external input/output capacitor. The TEM03 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 500VAC of solation, short-circuit protection. The safety meets to EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Maximum output power 3 Watts Voltage accuracy Full load and nominal Vin ± 2% Minimum load LL to HL at Full Load 0.2% Load regulation 10% to 100% FL 0.5% Ripple and noise 50MHz bandwidth 120mVp-p, max 0.02% / ºC Maximum temperature drift Transient response recovery time 25% load step change Short circuit protection Isolation voltage 500uS, typ XXS33 XXS05 XXS12 XXD12 3.3V 5V 12V 12V Switching frequency IEC60950, J60950, UL60950, EN60950 Full load to No load 100 to 1500 KHz Weight 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC 15VDC 36VDC 50VDC 100VDC OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) Open Safety standard pending None 5V nominal input 12V nominal input 24V nominal input 48V nominal input Model number 300 pF,max 170%, typ. L-C filter 3.3V 5V 12V 12V Isolation capacitance Metal case Input filter XXS33 XXS05 XXS12 XXD12 50M ohms Base material 5V nominal input 12V nominal input 24V nominal input 48V nominal input Open DC500V Case material INPUT SPECIFICATIONS Model number Isolation resistance 500 Vac Continuous, automatics recovery Over current protection Input surge voltage 100mS max See table Input to Output Input to Case Output to Case Input to Output Input to Case Output to Case 0% Line regulation Input voltage range Efficiency -Vout shorted 3.67V 6V 15V 15V -Vout connected with resistance (2) 3.3 to 3.67V (3-1) 5 to 6V (3-3) 12 to 15V (3-5) 12 to 15V (3-6) (Note1) +Vout shorted 2.84V 4.3V +Vout connected with resistance (2) 3.3 to 2.84V (3-2) 5 to 4.3V (3-4) - 11.5g (0.41oz) 1.12 x 0.81 x 0.33 Inch (28.5 x 20.5 x 8.5 mm) Dimension MTBF (Note 4) 650Fit (1500000hrs, 100% Load) ENVIRONMENTAL SPECIFICATIONS Operating temperature range (with derating) -20ºC to +70ºC Storage temperature range -40ºC to +85ºC Cooling Nature convection Thermal shock Vibration MIL-STD-810D At no operation, 10~55~10Hz (sweep for 15min.) amplitude 1. 5mm constant (maximum 9G X, Y, Z 2hrs each) Shock 100G Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS Meet EN55022 classes A recommend circuit with external capacitor filter at input ( Note 5 ) EMC external circuit + Input - DC-DC Converter 5V 12V 24V 48V input 220uF/16V input 220uF/25V input 100uF/50V input 100uF/100V + Output - Output Current (7) Eff (%) Input Current (6) Capacitor(8) Load max Model Number Input Range Output Voltage Output Voltage Range TEM03-05S33 4.5 – 9 VDC 3.3 VDC 2.84 – 3.67 VDC 600 mA 656 mA 65 3300 uF TEM03-05S05 4.5 – 9 VDC 5 VDC 4.3 – 6 VDC 600 mA 909 mA 70 1500 uF TEM03-05S12 4.5 – 9 VDC 12 VDC 12 – 15 VDC 250 mA 883 mA 72 700 uF TEM03-05D12 4.5 – 9 VDC 12 VDC 12 – 15 VDC 125 mA 883 mA 72 250 uF TEM03-12S33 9 – 18 VDC 3.3 VDC 2.84 – 3.67 VDC 600 mA 253 mA 70 3300 uF 352 mA 75 1500 uF TEM03-12S05 9 – 18 VDC 5 VDC 4.3 – 6 VDC 600 mA TEM03-12S12 9 – 18 VDC 12 VDC 12 – 15 VDC 250 mA 343 mA 77 700 uF TEM03-12D12 9 – 18 VDC 12 VDC 12 – 15 VDC 125 mA 343 mA 77 250 uF TEM03-24S33 18 – 36 VDC 3.3 VDC 2.84 – 3.67 VDC 600 mA 126 mA 70 3300 uF TEM03-24S05 18 – 36 VDC 5 VDC 4.3 – 6 VDC 600 mA 176 mA 75 1500 uF TEM03-24S12 18 – 36 VDC 12 VDC 12 – 15 VDC 250 mA 169 mA 78 700 uF TEM03-24D12 18 – 36 VDC 12 VDC 12 – 15 VDC 125 mA 169 mA 78 250 uF TEM03-48S33 36 – 75 VDC 3.3 VDC 2.84 – 3.67 VDC 600 mA 63 mA 70 3300 uF 88 mA 75 1500 uF TEM03-48S05 36 – 75 VDC 5 VDC 4.3 – 6 VDC 600 mA TEM03-48S12 36 – 75 VDC 12 VDC 12 – 15 VDC 250 mA 85 mA 78 700 uF TEM03-48D12 36 – 75 VDC 12 VDC 12 – 15 VDC 125 mA 85 mA 78 250 uF Note 2. 3. 4. 5. 6. 7. 8. The follow output voltage can be outputted by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. Arithmetic expression connected resistance: R ( K ) 3-1 Vo=(3.3*R+36.7)/(R+10) 3-2 Vo=(3.3*R+36.7)/(R+12.92) PIN CONNECTION 3-3 Vo=2.5*[2+2.7/(R+6.8)] 3-4 Vo=2.5*[2-2.7/(R+9.5)] 3-5 Vo=2.5+9.5(R+10.9)/(R+8.2) 3-6 Vo=2.5+22*(R+12.7)/(R+10)(Between two outputs) PIN SINGLE DUAL 1 2 3 4 5 6 Bellcore TR-NWT-000332. Case1:50% Stress, temperature at 40ºC. (Ground fixed and controlled environment) The filter capacitor recommended use “ CHEMICON “ KMF series or equivalent impedance at 0.16 ~ 0.33 ( 100KHz 20 ) Maximum value at nominal input voltage and full load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. + Vi - Vi NC - Vo Vset + Vo + Vi - Vi - Vo COM Vset + Vo Derating Curve BOTTOM VIEW OUTPUT POWER (%) 1. 100 75 50 Nature convection 25 0 -20 -10 0 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP 4(3) TRIM DOWN 5(5) RU ALL DIMENSIONS IN INCHES (mm) PIN PITCH TOLERANCE I0.014(0.35) 5(5) 6(6) RD