• PACKAGE, 1.61 x 1.02 x 0.33 INCH • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED • 2:1 WIDE INPUT VOLTAGE RANGE • LOW RIPPLE & NOISE • FIVE-SIDED SHIELD • OVER CURRENT PROTECTION • SHORT CIRCUIT PROTECTION • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR The TEN06 series offer 6 watts of output power from a 1.61 x 1.02 x 0.33 inch package without derating to 50ºC and without external input/output capacitor. The TEN06 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 500VAC of isolation, short-circuit protection. The safety meets to EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Maximum output power 6 Watts Voltage accuracy Full load and nominal Vin ± 2% Minimum load LL to HL at Full Load 0.2% Load regulation 10% to 100% FL 0.5% Ripple and noise 50MHz bandwidth 120mVp-p, max 0.02% / ºC Maximum temperature drift Transient response recovery time Short circuit protection 25% load step change Isolation voltage 500uS, typ 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC 15VDC 36VDC 50VDC 100VDC See figure 1 OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) (Note1) XXS33 XXS05 XXS12 XXD12 3.3V 5V 12V 12V Switching frequency IEC60950, J60950, UL60950, EN60950 Full load to No load 100 to 1500 KHz Weight Remote ON/OFF Open Safety standard pending None 5V nominal input 12V nominal input 24V nominal input 48V nominal input Model number 300 pF,max 150%, typ. L-C filter 3.3V 5V 12V 12V Isolation capacitance Metal case Input filter XXS33 XXS05 XXS12 XXD12 50M ohms Base material 5V nominal input 12V nominal input 24V nominal input 48V nominal input Open DC500V Case material INPUT SPECIFICATIONS Model number Isolation resistance 500 Vac Continuous, automatics recovery Over current protection Input surge voltage 100mS max See table Input to Output Input to Case Output to Case Input to Output Input to Case Output to Case 0% Line regulation Input voltage range Efficiency -Vout shorted +Vout shorted 3.67V 2.84V 4.3V 6V 15V 15V -Vout connected +Vout connected with resistance (2) with resistance (2) 3.3 to 3.67V (3-1) 3.3 to 2.84V (3-2) 5 to 6V (3-3) 5 to 4.3V (3-4) 12 to 15V (3-5) 12 to 15V (3-6) - 20.0g (0.71oz) 1.61 x 1.02 x 0.33 Inch (41 x 25.8 x 8.5 mm) Dimension MTBF (Note 4) 650Fit (1500000hrs, 100% Load) ENVIRONMENTAL SPECIFICATIONS Operating temperature range (with derating) -20ºC to +70ºC Storage temperature range -40ºC to +85ºC Cooling Nature convection Thermal shock Vibration Shock MIL-STD-810D At no operation, 10~55~10Hz (sweep for 15min.) amplitude 1. 5mm constant (maximum 9G X, Y, Z 2hrs each) 100G Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS Meet EN55022 classes A recommend circuit with external capacitor filter at input ( Note 5 ) EMC external circuit + Input - DC-DC Converter 5V 12V 24V 48V input 220uF/16V input 220uF/25V input 100uF/50V input 100uF/100V + Output - Model Number Input Range Output Voltage Output Voltage Range TEN06-05S33 4.5 – 9 VDC 3.3 VDC TEN06-05S05 4.5 – 9 VDC 5 VDC TEN06-05S12 4.5 – 9 VDC 12 VDC TEN06-05D12 4.5 – 9 VDC TEN06-12S33 9 – 18 VDC (7) Eff (%) Capacitor(8) Load max Output Current Input Current (6) 2.84 – 3.67 VDC 1200 mA 1212 mA 70 6600 uF 4.3 – 6 VDC 1000 mA 1429 mA 74 3000 uF 12 – 15 VDC 500 mA 1622 mA 78 1400 uF 12 VDC 12 – 15 VDC 250 mA 1667 mA 76 510 uF 3.3 VDC 2.84 – 3.67 VDC 1500 mA 604 mA 73 6600 uF 658 mA 80 3000 uF TEN06-12S05 9 – 18 VDC 5 VDC 4.3 – 6 VDC 1200 mA TEN06-12S12 9 – 18 VDC 12 VDC 12 – 15 VDC 500 mA 617 mA 85 1400 uF TEN06-12D12 9 – 18 VDC 12 VDC 12 – 15 VDC 250 mA 617 mA 85 510 uF TEN06-24S33 18 – 36 VDC 3.3 VDC 2.84 – 3.67 VDC 1500 mA 286 mA 77 6600 uF TEN06-24S05 18 – 36 VDC 5 VDC 4.3 – 6 VDC 1200 mA 321 mA 82 3000 uF TEN06-24S12 18 – 36 VDC 12 VDC 12 – 15 VDC 500 mA 309 mA 85 1400 uF TEN06-24D12 18 – 36 VDC 12 VDC 12 – 15 VDC 250 mA 309 mA 85 510 uF TEN06-48S33 36 – 75 VDC 3.3 VDC 2.84 – 3.67 VDC 1500 mA 143 mA 77 6600 uF 165 mA 80 3000 uF TEN06-48S05 36 – 75 VDC 5 VDC 4.3 – 6 VDC 1200mA TEN06-48S12 36 – 75 VDC 12 VDC 12 – 15 VDC 500 mA 155 mA 85 1400 uF TEN06-48D12 36 – 75 VDC 12 VDC 12 – 15 VDC 250 mA 155 mA 85 510 uF Note 1. The follow output voltage can be outputted by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. 2. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. 3. Arithmetic expression connected resistance: R ( K ) 3-1 Vo=(3.3*R+36.7)/(R+10) 3-2 Vo=(3.3*R+36.7)/(R+12.92) 3-3 Vo=2.5*[2+2.7/(R+6.8)] 3-4 Vo=2.5*[2-2.7/(R+9.5)] 3-5 Vo=2.5+9.5(R+10.9)/(R+.2) 3-6 Vo=2.5+22*(R+12.7)/(R+10)(Between two outputs) 4. Bellcore TR-NWT-000332. Case1:50% Stress, temperature at 40ºC. (Ground fixed and controlled environment) 5. The filter capacitor recommended use “ CHEMICON “ KMF series or equivalent impedance at 0.16 ~ 0.33 ( 100KHz 20 ) 6. Maximum value at nominal input voltage and full load. 7. Typical value at nominal input voltage and full load. 8. Test by minimum Vin and constant resistor load. BOTTOM VIEW ALL DIMENSIONS IN INCHES (mm) Figure 1 Derating Curve PIN PITCH TOLERANCE I0.014(0.35) Output can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP 5(4) TRIM DOWN 6(6) RU 6(6) 7(7) RD OUTPUT POWER (%) EXTERNAL OUTPUT TRIMMING PIN CONNECTION 100 75 50 Nature convection 25 0 -20 -10 0 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) PIN 1 2 3 4 5 6 7 SINGLE + Vi Ctrl - Vi NC - Vo Vset + Vo DUAL + Vi Ctrl - Vi - Vo COM Vset + Vo