ETC TIP606

The Embedded I/O Company
16 Interrupt generating Digital Inputs
Application Information
Technical Information
The TIP606 is an IndustryPack® compatible module and is
designed for avionic test environments. It provides 16
optically isolated differential inputs for high unipolar input
voltage which may exceed the supply voltage of the
module. The inputs can withstand input voltage up to 44V
maximum between the two differential input pins.
!
!
!
!
!
!
Due to the differential inputs of the TIP606, it is even
possible to use the module in noisy environments. The
TIP606 provides a high differential input resistance of
112kohms typically.
!
!
Industry Pack logic Interface
The interface circuit will detect a logic 1, if the differential
voltage is typically greater than +14.0V and it will detect a
logic 0, if the input voltage is typically lower than +3.5V.
The inputs are isolated from the IP interface via
optocouplers. Each input is capable of generating interrupts
on rising or falling edges of the input signal. It is also
possible to disable the generation of interrupts and poll the
input register for new data.
Interface according to IndustryPack specification
Identification-PROM supports auto-configuration
Single Size IndustryPack
16 interrupt generating differential digital inputs
Up to 44V signal voltage for all 16 inputs
Optocouplers for galvanic isolation of input to computer
system
All inputs have an electronic debounce circuit,
debounce time is freely programmable
Operating temperature -40°C to +85°C
Input
Register
with Interrupt
Capability
Electronic
Debouncing
16 Optocouplers
16 Input
Circuits
Industry Pack I/O Interface
TIP606
8 bit vector
Decoder
ID-PROM
Order Information
All inputs have an electronic debounce circuit. The
debounce time is programmable in a range from 900µs up
to 230ms in 256 steps of 900µs. The debounce circuit can
also be disabled. The TIP606 is designed for an operating
temperature from -40°C to +85°C.
For First-Time-Buyers the engineering documentation
TIP606-ED
is
recommended.
The
engineering
documentation includes TIP606-DOC, schematics and data
sheets.
TIP606-10
16 Interrupt Generating Digital Inputs
TIP606-DOC
TIP606-ED
User Documentation
Engineering Documentation, includes
TIP606-DOC
TIP606-SW-12
TIP606-SW-32
TIP606-SW-42
TIP606-SW-62
TIP606-SW-72
TIP606-SW-82
TIP606-SW-92
TIP606-SW-95
OS-9 Software Support
pSOS Software Support
VxWorks Software Support
Windows NT 4.0 Software Support
LynxOS Software Support
LiNUX Software Support
QNX 4 Software Support
QNX 6 Software Support
The driver software TIP606-SW-xx provides functions to
configure the TIP606, read the input status and connect
software events to input state changes.
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice
IndustryPack is a registered trademark of SBS Technologies, Inc.
TEWS TECHNOLOGIES GmbH
Am Bahnhof 7
Phone: +49-(0)4101-4058-0
e-mail: [email protected]
25469 Halstenbek / Germany
Fax: +49-(0)4101-4058-19
www.tews.com
TEWS TECHNOLOGIES LLC
1 E. Liberty Street, Sixth Floor
Phone: +1 (775) 686 6077
e-mail: [email protected]
06/2002
Reno, Nevada 89504 / USA
Fax: +1 (775) 686 6024
www.tews.com