The Embedded I/O Company TIP501 16 Channels of Isolated 16 bit A/D Conversion Application Information Technical Information The TIP501 is an IndustryPack compatible module providing 16 single-ended or 8 differential channels of isolated 16 bit A/D conversion. The data acquisition and conversion time is up to 12µs without channel / gain change and up to 14.5µs with channel / gain change. ! ! ! ! For First-Time-Buyers the engineering documentation TIP501-ED is recommended. The engineering documentation includes TIP501-DOC, schematics and data sheets. Driver support (TIP501-SW-xx) for different operating systems is available. Control & Interface 16 bit A/D Converter with S/H ID-PROM 16 Channel Input Multiplexer DC/DC Converter Order Information TIP501-10 TIP501-11 TIP501-20 TIP501-21 TIP501-DOC TIP501-ED TIP501-SW-12 TIP501-SW-32 TIP501-SW-42 TIP501-SW-62 TIP501-SW-72 TIP501-SW-82 TIP501-SW-92 TIP501-SW-95 16 Single-Ended or 8 Differential Channels of Isolated 16 bit Conversion, gain 1, 2, 5, 10, input range +/-10V 16 Single-Ended or 8 Differential Channels of Isolated 16 bit Conversion, gain 1, 2, 4, 8, input range +/-10V As TIP501-10 but input range 0-10V As TIP501-11 but input range 0-10V User Documentation Engineering Documentation, includes TIP501-DOC OS-9 Software Support pSOS Software Support VxWorks Software Support Windows NT 4.0 Software Support LynxOS Software Support LiNUX Software Support QNX 4 Software Support QNX 6 Software Support TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice IndustryPack is a registered trademark of SBS Technologies, Inc. TEWS TECHNOLOGIES GmbH Am Bahnhof 7 Phone: +49-(0)4101-4058-0 e-mail: [email protected] 25469 Halstenbek / Germany Fax: +49-(0)4101-4058-19 www.tews.com PGA gain1,2,5,10 or gain 1,2,4,8 Industry Pack I/O Interface ! Optocoupler ! ! ! ! Industry Pack logic Interface The input multiplexer offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP501-1x and 0-10V for the TIP501-2x. The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP501 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. ! ! Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 single-ended or 8 differential channels of isolated 16 bit A/D conversion ESD protected input multiplexer Programmable gain amplifier, gain 1, 2, 5, 10 or gain 1, 2, 4, 8 16 bit A/D converter with internal S/H and reference Full-scale input range +/- 10 V or 0-10V (gain = 1) Interrupt capability at end-of-conversion Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature –40°C to +85°C TEWS TECHNOLOGIES LLC 1 E. Liberty Street, Sixth Floor Phone: +1 (775) 686 6077 e-mail: [email protected] 06/2002 Reno, Nevada 89504 / USA Fax: +1 (775) 686 6024 www.tews.com