The Embedded I/O Company TIP550 8 (4) Channels of Isolated 12 bit D/A Conversion Application Information Technical Information The TIP550 is an IndustryPack compatible module and provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converter. ! ! ! ! ! For First-Time-Buyers the engineering documentation TIP550-ED is recommended. The engineering documentation includes TIP550-DOC, schematics and data sheets. Driver support (TIP550-SW-xx) for different operating systems is available. Control & Interface 12 bit DAC 4 Channels ID-PROM DC/DC Converter Order Information TIP550-10 TIP550-11 TIP550-DOC TIP550-ED TIP550-SW-12 TIP550-SW-32 TIP550-SW-42 TIP550-SW-62 TIP550-SW-72 TIP550-SW-82 TIP550-SW-92 TIP550-SW-95 8 Channels of Isolated 12 bit Analog Output 4 Channels of Isolated 12 bit Analog Output User Documentation Engineering Documentation, includes TIP550-DOC OS-9 Software Support pSOS Software Support VxWorks Software Support Windows NT 4.0 Software Support LynxOS Software Support LiNUX Software Support QNX 4 Software Support QNX 6 Software Support TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice IndustryPack is a registered trademark of SBS Technologies, Inc. TEWS TECHNOLOGIES GmbH Am Bahnhof 7 Phone: +49-(0)4101-4058-0 e-mail: [email protected] 25469 Halstenbek / Germany Fax: +49-(0)4101-4058-19 www.tews.com 12 bit DAC 4 Channels Industry Pack I/O Interface Industry Pack logic Interface ! Optocoupler ! Each TIP550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) channels of isolated 12 bit analog output Full-scale output range +/-10 V or 0-10V selectable by jumper Factory calibrated, calibration information in IdentificationPROM unique to each IP Operating temperature -40°C to +85°C TEWS TECHNOLOGIES LLC 1 E. Liberty Street, Sixth Floor Phone: +1 (775) 686 6077 e-mail: [email protected] 06/2002 Reno, Nevada 89504 / USA Fax: +1 (775) 686 6024 www.tews.com